EN 60079-29-1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
Amended by
Superseded date
13-06-2022
Superseded by
Published date
23-12-2016
Sorry this product is not available in your region.
European foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Test methods
Annexes
Annex A (normative) - Performance requirements
Annex B (informative) - Determination of time of response
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding
European publications
Annex ZZ (informative) - Relationship between this European
Standard and the essential requirements of Directive
2014/34/EU [2014 OJ L96] aimed to be covered
IEC 60079-29-1:2016(E) specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the detection and measurement of flammable gas or vapour concentrations with air. The equipment, or parts thereof, is intended for use in explosive atmospheres and in mines susceptible to firedamp. This second edition of IEC 60079-29-1 cancels and replaces the first edition of IEC 60079-29-1:2007 series and constitutes a technical revision. Refer to the Forward of the document for a listing of the extensive changes between this edition and the previous edition.Keywords: detection and measurement of flammable gas or vapour concentrations with air, explosive atmospheres, mines susceptible to firedamp, explosion hazard
| Committee |
CLC/TC 31
|
| DevelopmentNote |
Supersedes EN 61779-1, EN 61779-2, EN 61779-3, EN 61779-4 and EN 61779-5. (11/2007)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 60079-29-1:2016 | Identical |
| NBN EN 60079-29-1 : 2008 | Identical |
| NEN EN IEC 60079-29-1 : 2017 | Identical |
| UNE-EN 60079-29-1:2017 | Identical |
| BS EN 60079-29-1:2007 | Identical |
| SN EN 60079-29-1 : 2016 | Identical |
| PN EN 60079-29-1 : 2017 | Identical |
| CEI EN 60079-29-1 : 2009 | Identical |
| NF EN 60079-29-1 : 2008 | Identical |
| I.S. EN 60079-29-1:2016 | Identical |
| IEC 60079-29-1:2016 | Identical |
| ONORM OVE EN 60079-29-1 : 2017 AC 2018 | Identical |
| VDE 0400-1 : 2017 COR 1 2017 | Identical |
| CEI EN 60079-29-1:2017 | Identical |
| DIN EN 60079-29-1 : 2017 COR 1 2017 | Identical |
| BS EN 60079-29-1:2016 | Equivalent |
| OVE/ONORM EN 60079-29-1 : 2008 | Identical |
| UNE-EN 62282-3-300:2013 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| BS EN 60079-29-3:2014 | Explosive atmospheres Gas detectors. Guidance on functional safety of fixed gas detection systems |
| UNE-EN 50194-2:2007 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
| BS EN 15001-2:2008 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| 12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| DIN EN 50402 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| I.S. EN 50402:2017 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| BS EN 50545-1 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| CEI EN 50379-1 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| CEI EN 60079-29-4 : 2011 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| UNE-EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| 18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| VDE 0400-70 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
| I.S. EN 50545-1:2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 13160-4:2003 | Leak detection systems Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
| DIN EN 1127-2:2002-07 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| CLC/TR 60079-33:2015 | Explosive atmospheres - Part 33: Equipment protection by special protection 's' |
| EN 61207-6:2015 | Expression of performance of gas analyzers - Part 6:Photometric analyzers |
| EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| EN 62282-3-300:2012 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| EN 60079-29-4:2010 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| EN 13160-4:2016 | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems |
| 09/30182356 DC : 0 | BS EN 12581:2005/A1 - COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| S.R. CLC/TR 60079-33:2015 | EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S' |
| BS EN 60079-29-2:2015 | Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| BS EN 50134-2:2017 | Alarm systems. Social alarm systems Trigger devices |
| BS EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems |
| 13/30260741 DC : 0 | BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| BS EN 61207-6:2015 | Expression of performance of gas analyzers Photometric analyzers |
| UNE-EN 60079-29-4:2011 | Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| BS EN 62282-3-300:2012 | Fuel cell technologies Stationary fuel cell power systems. Installation |
| PREN 50402 : DRAFT 2013 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| EN 50134-2:2017 | Alarm systems - Social alarm systems - Part 2: Trigger devices |
| EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems |
| I.S. EN 50194-2:2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| CEI EN 50271 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| BS EN 50194-2 : 2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| CEI UNI EN 50194-1 : 2012 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| IEC TR 61831:2011 | On-line analyser systems - Guide to design and installation |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| DIN EN 1755:2016-02 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 1127-2:2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 1755:2015 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 13160-4:2016 | LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| I.S. EN 15001-2:2008 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| CEI EN 62282-3-300 : 2013 | FUEL CELL TECHNOLOGIES - PART 3-300: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| 13/30257895 DC : 0 | BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| UNI CEI EN 50194-1 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| 13/30260728 DC : 0 | BS EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN 60079-29-2:2015 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| BS EN 60079-29-4:2010 | Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases |
| UNE-EN 50271:2011 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| BS EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies |
| UNI EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| NF EN 50271 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| DIN EN 1127-2:2014-09 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| UNE-EN 1755:2016 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1127-2 : 2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| PREN 15001-2 : DRAFT 2017 | GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| PD IEC/TR 61831:2011 | On-line analyser systems. Guide to design and installation |
| PREN 1755 : DRAFT 2013 | SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| UNE-EN 50545-1:2012 | Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides |
| BS EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances General requirements and test methods |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| CEI EN 60079-29-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| I.S. EN 50271:2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| I.S. EN 50194-1:2009 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 50379-1:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| BS EN 1127-2:2014 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining |
| PD CLC/TR 60079-33:2015 | Explosive atmospheres Equipment protection by special protection \'s\' |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| BS EN 50194-1:2009 | Electrical apparatus for the detection of combustible gases in domestic premises Test methods and performance requirements |
| I.S. EN 60079-29-3:2014 | EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS - GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| I.S. EN 60079-14:2014 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
| UNE-EN 60079-29-2:2016 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| I.S. EN 62282-3-300:2012 | FUEL CELL TECHNOLOGIES - PART 3-300: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION (IEC 62282-3-300:2012 (EQV)) |
| I.S. EN 50134-2:2017 | ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES |
| CEI EN 61207-6 : 2016 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 6: PHOTOMETRIC ANALYZERS |
| PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| PREN 50270 : DRAFT 2013 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 61207-6:2015 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 6: PHOTOMETRIC ANALYZERS |
| I.S. EN 60079-29-4:2010 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| UNE-EN 13160-4:2017 | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 60079-29-3:2014 | Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 50194-2 : 2006 AMD 1 2016 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN 50194-1:2009 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| DIN EN 15001-2:2010-04 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 50545-1:2011/A1:2016 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 60079-29-4:2010 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| ISO 6145-7:2009 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 7: Thermal mass-flow controllers |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 6142:2001 | Gas analysis Preparation of calibration gas mixtures Gravimetric method |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| ISO 6145-10:2002 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method |
| ISO 6145-2:2014 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps |
| EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| ISO 6145-5:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| ISO 6145-4:2004 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method |
| ISO 6145-9:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method |
| ISO 6145-1:2003 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 60079-29-3:2014 | Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems |
| ISO 6145-6:2017 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.