• EN 60368-1:2000/A1:2004

    Current The latest, up-to-date edition.

    PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION

    Available format(s): 

    Language(s): 

    Published date:  20-09-2004

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 General
      1.1 Scope
      1.2 Normative references
      1.3 Order of precedence
    2 Terminology and general requirements
      2.1 General
      2.2 Definitions
      2.3 Preferred values for ratings and characteristics
      2.4 Marking
    3 Quality assessment procedures
      3.1 Primary stage of manufacture
      3.2 Structurally similar components
      3.3 Subcontracting
      3.4 Incorporated components
      3.5 Manufacturer's approval
      3.6 Approval procedures
      3.7 Procedures for capability approval
      3.8 Procedures for qualification approval
      3.9 Test procedures
      3.10 Screening requirements
      3.11 Rework and repair work
      3.12 Certified records of released lots
      3.13 Validity of release
      3.14 Release for delivery
      3.15 Unchecked parameters
    4 Test and measurement procedures
      4.1 General
      4.2 Test and measurement conditions
      4.3 Visual inspection
      4.4 Dimensions and gauging procedures
      4.5 Electrical test procedures
      4.6 Mechanical and environmental test procedures
      4.7 Endurance test procedure
    Bibliography
    Annex ZA (normative) Normative references to international
             publications with their corresponding European
             publications

    Abstract - (Show below) - (Hide below)

    Defines test methods and general criteria for piezoelectric filters of assessed quality either by using qualification approval or capability approval procedures.

    General Product Information - (Show below) - (Hide below)

    Committee SR 49
    Development Note Supersedes EN 167000. (10/2001)
    Document Type Test Method
    Publisher European Committee for Standards - Electrical
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60368-4:2001 Piezoelectric filters Sectional specification. Capability approval
    CEI EN 60368-4 : 2003 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 4: SECTIONAL SPECIFICATION - CAPABILITY APPROVAL
    BS EN 60368-4-1:2001 Piezoelectric filters. Blank detail specification. Capability approval
    BS EN 62047-7 : 2011 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 7: MEMS BAW FILTER AND DUPLEXER FOR RADIO FREQUENCY CONTROL AND SELECTION
    BS EN 61837-2 : 2011 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES
    BS EN 61837-3:2015 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections Metal enclosures
    BS EN 60368-3:2010 Piezoelectric filters of assessed quality Standard outlines and lead connections
    EN 61837-2:2011/A1:2014 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES (IEC 61837-2:2011/A1:2014)
    EN 61837-3:2015 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 3: METAL ENCLOSURES (IEC 61837-3:2015)
    EN 60368-3:2010 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
    EN 62047-7 : 2011 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 7: MEMS BAW FILTER AND DUPLEXER FOR RADIO FREQUENCY CONTROL AND SELECTION

    Standards Referencing This Book - (Show below) - (Hide below)

    HD 323.2.20 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
    IEC 60368-4:2000 Piezoelectric filters of assessed quality - Part 4 : Sectional specification - Capability approval
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
    EN 60068-2-1:2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
    IECQ 001002-3:2005 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
    EN 60068-2-2:2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
    IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
    IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
    EN 60068-1:2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013)
    EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
    IECQ 001002-2:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION
    EN 61000-4-2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
    EN 60068-2-7 : 1993 ENVIRONMENTAL TESTING - TESTS - TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE
    IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    IEC QC 001004 : 2.0
    IEC 60410:1973 Sampling plans and procedures for inspection by attributes
    EN 60068-2-27:2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    HD 323.2.3 : 200S2 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE
    IEC 60068-2-3:1969 Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
    IEC GUIDE 102:1996 Electronic components - Specification structures for qualityassessment (Qualification approval and capability approval)
    EN 60068-2-17 : 1994 BASIC ENVIRONMENTAL TESTING - TEST Q: SEALING
    IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
    IEC 60068-2-10:2005 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
    EN 60068-2-21:2006 ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    HD 323.2.10 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST J AND GUIDANCE: MOULD GROWTH
    IECQ 001002-1:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 1: ADMINISTRATION
    EN 60068-2-29 : 1993 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST EB AND GUIDANCE: BUMP
    EN 60068-2-13 : 1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST M: LOW AIR PRESSURE
    EN 60068-2-6:2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
    IEC 60050-561:2014 International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
    IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 61178-1:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification
    EN 60068-2-30:2005 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
    EN 60068-2-32 : 1993 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 60068-2-45:1992/A1:1993 Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
    EN 60068-2-14:2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
    IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective