EN ISO 898-1:2013
Current
Current
The latest, up-to-date edition.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
Amended by
Published date
23-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation system for property classes
6 Materials
7 Mechanical and physical properties
8 Applicability of test methods
9 Test methods
10 Marking
Annex A (informative) - Relation between tensile strength and
elongation after fracture
Annex B (informative) - Influence of elevated temperatures on
mechanical properties of fasteners
Annex C (informative) - Elongation after fracture for full-size
fasteners, A[f]
Bibliography
ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — the term used when bolts, screws and studs are considered all together — that conform to its requirements are evaluated at that ambient temperature range. Information is given on fasteners that do not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures.ISO 898-1:2009 excludes certain fasteners that do not fulfil its tensile or torsional requirements because the geometry of their heads reduce the shear area in the head compared to the stress area in the thread. These include fasteners having a low head, with or without external driving feature, a low round or cylindrical head with internal driving feature or a countersunk head with internal driving feature (see 8.2).It is applicable to bolts, screws and studs made of carbon steel or alloy steel, having a triangular ISO metric screw thread according to ISO 68-1, with a coarse pitch thread M1,6 to M39, and fine pitch thread M8´1 to M39´3, with diameter/pitch combinations according to ISO 261 and ISO 262, having thread tolerances according to ISO 965-1, ISO 965-2 and ISO 965-4.It is not applicable to set screws and similar threaded fasteners not under tensile stresses (see ISO 898-5).It does not specify requirements for such properties as weldability, corrosion resistance, resistance to shear stress, torque/clamp force performance, or fatigue resistance.
| Committee |
CEN/TC 185
|
| DevelopmentNote |
Supersedes EN 20898-1. (11/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 898-1:2013 | Identical |
| UNE-EN ISO 898-1:2015 | Identical |
| NBN EN ISO 898-1 : 2013 | Identical |
| NEN EN ISO 898-1 : 2013 | Identical |
| NS EN ISO 898-1 : 2013 AC 2013 | Identical |
| I.S. EN ISO 898-1:2013 | Identical |
| PN EN ISO 898-1 : 2013 | Identical |
| UNI EN ISO 898-1 : 2013 | Identical |
| SS-EN ISO 898-1:2013 | Identical |
| SN EN ISO 898-1:2013 | Identical |
| BS EN ISO 898-1:2013 | Identical |
| NF EN ISO 898-1 : 2013 | Identical |
| DIN EN ISO 898-1:2013-05 | Identical |
| 03/319820 DC : DRAFT DEC 2003 | EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED |
| 02/704463 DC : DRAFT MAR 2002 | PREN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| 02/704461 DC : DRAFT MAR 2002 | PREN 14399-2 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 2: SUITABILITY TEST FOR PRELOADING |
| I.S. EN 74-1:2005 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| DIN EN 15865:2009-08 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| 14/30304786 DC : 0 | BS EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 01/709787 DC : DRAFT JUN 2001 | PREN ISO 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| 13/30277428 DC : 0 | BS EN 14399-2 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY TEST FOR PRELOADING |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 02/704460 DC : DRAFT MAR 2002 | PREN 14399-1 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 16/30322067 DC : 0 | BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| 02/107768 DC : DRAFT DEC 2002 | BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| 01/709788 DC : DRAFT JUN 2001 | PREN ISO 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| PREN 50119 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 01/709786 DC : DRAFT JUN 2001 | PREN ISO 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| VDMA 24408 : DRAFT 2015 | LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE |
| PREN 14399-8 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| BS EN 13001-3-1 : 2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
| UNI EN 13001-3-1 : 2013 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| 16/30319005 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| UNI EN 14399-7 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN 15865:2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| BS EN 12285-1:2003 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| DIN EN 12285-1:2016-10 (Draft) | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| EN 15048-1:2016 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 14399-2:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| BS EN 13531 : 2001 | EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| BS EN 1662:1998 | Hexagon bolts with flange. Small series |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| DIN EN 13411-5:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| EN 15609:2012 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 12285-2:2005 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| EN 12561-6:2011 | Railway applications - Tank wagons - Part 6: Manholes |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 13001-3-1:2012+A2:2018 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13531:2001+A1:2008 | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) |
| DIN EN 14399-8:2008-03 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| DIN EN ISO 16330:2004-08 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| DS/EN 50341-2-21:2023 | Overhead electrical lines exceeding AC 1 kV – National Normative Aspects (NNA) for Slovenia (based on EN 50341-1:2012) |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 61518:2002-06 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| 13/30277434 DC : 0 | BS EN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| UNE-EN 15882-1:2013 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| DIN EN 14399-10:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| 03/318786 DC : DRAFT NOV 2003 | EN 14831 - FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
| BS EN 14399-8:2007 | High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 10/30234330 DC : DRAFT DEC 2010 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 07/30166055 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| PREN 14399-2 : DRAFT 2013 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY TEST FOR PRELOADING |
| 02/103834 DC : DRAFT JUN 2002 | PREN 14475 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| BS EN 1366-5:2010 | Fire resistance tests for service installations Service ducts and shafts |
| BS EN 15609:2012 | LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| 04/19969165 DC : 0 | BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVE ASSEMBLIES |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| DD CEN/TS 13001-3-1 : 2004 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 01/122757 DC : DRAFT JULY 2001 | ISO/DIS 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| BS EN 15865:2009 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| I.S. EN 14399-10:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNE-EN 14399-1:2016 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| UNE-EN 14399-4:2016 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| NF EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 15882-1 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| I.S. EN 15048-1:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| EN 15882-1:2011+A1:2017 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| PREN 14399-10 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| UNE-EN 15048-1:2018 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| UNI EN 14399-10 : 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| ONORM EN 14399-10 : JUN 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| EN 14399-10:2018 | High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 50119:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 12285-2:2005-05 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| DIN EN 14475:2006-04 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| BS EN 15048-1:2007 | Non-preloaded structural bolting assemblies General requirements |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| BS EN 1665:1997 | Hexagon bolts with flange. Heavy series |
| BS EN 14399-1:2015 | High-strength structural bolting assemblies for preloading General requirements |
| I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 14399-4:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| DIN EN 74-1:2005-12 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 13531:2001 | EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 14399-3:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN 12561-6:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| I.S. EN 13411-5:2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| I.S. EN 14399-2:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 14399-1:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| BS 6912-6(2000) : 2000 | EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| BS 88-2(2010) : 2010 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J |
| DIN EN 1999-1-1:2014-03 | Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules |
| 17/30364387 DC : 0 | BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| DIN EN 15609:2012-07 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| 02/704462 DC : DRAFT MAR 2002 | PREN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| 16/30319008 DC : 0 | BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS |
| 13/30277431 DC : 0 | BS EN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| NF EN 50119 : 2010 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| PREN 50069 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| 14/30260020 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| 15/30303100 DC : 0 | BS EN 50052 - CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| 15/30332551 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI CEN/TS 13001-3-1 : 2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| UNE-EN 14653-1:2012 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| PREN 14399-3 : DRAFT 2013 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| 01/122755 DC : DRAFT JULY 2001 | ISO/DIS 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 01/709785 DC : DRAFT JUN 2001 | PREN ISO 16136 - INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS |
| PREN 12285-1 : DRAFT 2016 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| I.S. CEN TS 13001-3-1:2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 14399-7:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 12285-1:2003 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| UNE-EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004) |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| BS EN 14475:2006 | Execution of special geotechnical works. Reinforced fill |
| BS EN 13627:2000 | Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements |
| UNE-EN 12561-6:2012 | Railway applications - Tank wagons - Part 6: Manholes |
| UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EEMUA 158 : 2014 | CONSTRUCTION SPECIFICATION FOR FIXED OFFSHORE STRUCTURES |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| UNI EN 14831 : 2005 | FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
| ONORM EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNI EN 13411-5 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 13531 : 2009 | EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| UNI EN 14219 : 2006 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES |
| UNI EN 1993-1-8 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| ONORM EN 74-1 : 2006 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 12561-6 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| UNI EN 14420-3 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| UNI EN 14475 : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| 15/30332548 DC : 0 | BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| PREN 50052 : DRAFT 2015 | CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| BS EN 50119 : 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| UNI EN 1999-1-1 : 2014 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| 08/30184289 DC : DRAFT SEP 2008 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| I.S. EN 13510:2000 | EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| 09/30188143 DC : DRAFT OCT 2009 | BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| 17/30341013 DC : DRAFT AUG 2017 | BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| PREN 15609 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| DIN EN 14399-8:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS 6912-25(2001) : 2001 | EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| 04/30123712 DC : DRAFT OCT 2004 | EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: SUITABILITY TEST |
| 08/30173031 DC : DRAFT JAN 2008 | BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| UNI EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| PREN 15048-2 : DRAFT 2014 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| I.S. EN 15609:2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| I.S. EN 13001-3-1:2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| BS EN 14399-7:2007 | High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 1366-5 : 2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| BS EN 14399-10:2009 | High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload |
| 16/30323363 DC : 0 | BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVES |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
| DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| DIN EN 14653-1:2005-07 | MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS |
| BS EN 1515-3:2005 | Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes. Requirements and test procedures |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 13411-5 : 2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| BS EN ISO 16330:2003 | Reciprocating positive displacement pumps and pump units. Technical requirements |
| BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
| BS EN 14219:2003 | Hexagon bolts with flange with metric fine pitch thread. Small series |
| I.S. EN 50119:2020 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| BS EN 12952-14:2004 | Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN 1515-2:2001 | Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| UNE-EN 14475:2011 | Execution of special geotechnical works - Reinforced fill |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| ISO 16330:2003 | Reciprocating positive displacement pumps and pump units Technical requirements |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
| BS EN 14831:2005 | Fasteners. Tightening performance. Torque/Angle simplified test method |
| BS EN 14399-4:2005 | High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut assemblies |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| BS EN 13331-1:2002 | Trench lining systems Product specifications |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 14399-2:2015 | High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 16330:2003 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 13627 : 2000 | EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 1515-3:2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
| EN 14399-4:2015 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| EN 14831:2005 | Fasteners - Tightening performance - Torque/Angle simplified test method |
| EN 15865:2009 | Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| DIN EN 14219:2003-09 | Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) |
| 01/122758 DC : DRAFT JULY 2001 | ISO/DIS 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 17/30364380 DC : 0 | BS EN 50064 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| 15/30332545 DC : 0 | BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| PREN 14399-4 : DRAFT 2013 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 07/30166835 DC : 0 | BS EN 1366-5 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 10/30219378 DC : 0 | BS EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| 01/709784 DC : DRAFT JUN 2001 | PREN ISO 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| 01/122754 DC : DRAFT JULY 2001 | ISO/DIS 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| DIN 6900-5:2004-09 | Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer |
| DIN EN 1366-5:2010-06 | Fire resistance tests for service installations - Part 5: Service ducts and shafts |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| PREN 50064 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| EN 1366-5:2010 | Fire resistance tests for service installations - Part 5: Service ducts and shafts |
| UNE-EN 14399-3:2016 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| PREN 14399-7 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| UNE-EN 14399-2:2016 | High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NF EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ON THREADED FASTENERS |
| I.S. EN 14399-7:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN 15882-1:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| DIN EN 13001-3-1:2013-12 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| UNI EN 14399-8 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 12285-1:2003 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| UNI EN 15609 : 2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 1366-5:2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| I.S. EN 14399-8:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| DIN EN 14399-4:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| DIN EN 13531:2009-08 | EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| DIN EN 12561-6:2011-10 | Railway applications - Tank wagons - Part 6: Manholes |
| DIN EN 14399-1:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| BS EN 14399-2 : 2015-02 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| BS EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support Product specifications |
| BS EN 12561-6:2011 | Railway applications. Tank wagons Manholes |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 12285-2:2005 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| EN 13331-1:2002 | Trench lining systems - Part 1: Product specifications |
| DIN EN 14831:2005-07 | Fasteners - Tightening performance - Torque/Angle simplified test method |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 1515-3:2005-12 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 898-7:1992 | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 1891:2009 | Fasteners — Terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.