• IEC 61000-4-9 : 2.0

    Current The latest, up-to-date edition.

    ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-9: TESTING AND MEASUREMENT TECHNIQUES - IMPULSE MAGNETIC FIELD IMMUNITY TEST

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  13-07-2016

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope and object
    2 Normative references
    3 Terms, definitions and abbreviated terms
    4 General
    5 Test levels
    6 Test instrumentation
    7 Test setup
    8 Test procedure
    9 Evaluation of test results
    10 Test report
    Annex A (informative) - Characteristics of non standard
            induction coils
    Annex B (informative) - Information on the field distribution
            of standard induction coils
    Annex C (informative) - Selection of the test levels
    Annex D (informative) - Measurement uncertainty (MU)
            considerations
    Annex E (informative) - Mathematical modelling of surge
            current waveforms
    Annex F (informative) - Characteristics using two standard
            induction coils
    Annex G (informative) - 3D numerical simulations
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the immunity requirements, test methods, and range of recommended test levels for equipment subjected to impulse magnetic disturbances mainly encountered in: - industrial installations, - power plants, - railway installations, - medium voltage and high voltage sub-stations.

    General Product Information - (Show below) - (Hide below)

    Committee TC 77
    Development Note Stability Date: 2024. (07/2016)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    03/305095 DC : DRAFT MAR 2003 IEC 62305-4 - PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES
    CLC/TS 62603-1 : 2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
    CSA C22.2 No. 257 : 2006 : R2015 INTERCONNECTING INVERTER-BASED MICRO-DISTRIBUTED RESOURCES TO DISTRIBUTION SYSTEMS
    CEI EN 61869-6 : 1ED 2017 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    I.S. EN 61800-3:2005 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
    IEC TR 61000-2-5 REDLINE : 3ED 2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    MIL PRF 32383/4 : 0 BATTERY, RECHARGEABLE, SEALED, LITHIUM-ION, BB-25XX AND BB-35XX
    09/30214220 DC : 0 BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    I.S. EN 61000-4-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    03/108042 DC : DRAFT MAY 2003 IEC 61000-4-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES
    IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    I.S. EN 60044-8:2002 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
    IEC 61851-21:2001 Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply
    BS EN 60044-8:2002 Instrument transformers Electronic current transformers
    CSA C60044-8 : 2007 : R2016 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
    I.S. EN 61869-6:2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
    CSA C22.2 No. 257:2006 INTERCONNECTING INVERTER-BASED MICRO-DISTRIBUTED RESOURCES TO DISTRIBUTION SYSTEMS
    EN 62305-4:2011/AC:2016 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010)
    EN 61869-6 : 2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS (IEC 61869-6:2016)
    14/30298051 DC : 0 BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
    10/30189547 DC : 0 BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
    00/244020 DC : DRAFT SEP 2000 IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
    15/30324832 DC BS EN 62305-4. Protection against lightning. Part 4. Electrical and electronic systems within structures
    BS PD CLC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
    BS EN 61800-3 : 2004 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    CEI EN 62689-1 : 1ED 2017 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    03/107918 DC : DRAFT MAY 2003 IEC 61000-4-1 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    IEC TS 61000-1-2:2008 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
    CSA C60044-8 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
    I.S. EN 61000-1-2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    CEI EN 62305-4 : 2013 PROTECTION CONTRE LA FOUDRE - PARTIE 4: RESEAUX DE PUISSANCE ET DE COMMUNICATION DANS LES STRUCTURES
    EN 14236 : 2007 ULTRASONIC DOMESTIC GAS METERS
    IEC 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
    DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
    I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    VDE 0414-44-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    DIN EN 60044-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    BS EN 61869-6 : 2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
    07/30165539 DC : 0
    IEEE C57.15 : 2009 REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR STEP-VOLTAGE REGULATORS
    14/30284930 DC : 0 BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS
    CEI EN 60044-7 : 2001 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    DD IEC TS 61000-1-2 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    BS ISO 18185-3:2006 FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
    BS EN 62305-4:2011 Protection against lightning Electrical and electronic systems within structures
    BS EN 61000-4-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    15/30329267 DC : 0 BS EN 60747-17 - SEMICONDUCTOR DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
    NF EN 60044-8 : 2006 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
    IEC TS 61312-2:1999 Protection against lightning electromagnetic impulse (LEMP) - Part 2: Shielding of structures, bonding inside structures and earthing
    CSA C60044-8 :2007 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
    BS IEC 60076-21:2011 POWER TRANSFORMERS - PART 21: STANDARD REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR STEP-VOLTAGE REGULATORS
    PD IEC/TR 61000-2-5:2017 (published 2017-02) Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments
    ISO 18185-3:2015 Freight containers Electronic seals Part 3: Environmental characteristics
    I.S. EN 61069-1:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
    I.S. EN 62305-4:2011 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES
    I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    IEC PAS 60747-17:2011 Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced isolation
    IEC 60076-21:2011 Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
    IEEE C62.72 : 2007 APPLICATION OF SURGE-PROTECTIVE DEVICES FOR USE ON THE LOAD SIDE OF SERVICE EQUIPMENT IN LOW-VOLTAGE (1000 V OR LESS, 50 HZ OR 60 HZ) AC POWER CIRCUITS
    IEC 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
    BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    UNE-EN 62305-4:2011 Protection against lightning -- Part 4: Electrical and electronic systems within structures
    EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
    UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    04/30116083 DC : DRAFT JUL 2004 IEC 62305-5 - PROTECTION AGAINST LIGHTNING - PART 5: SERVICES
    CEI EN 60044-8 : 2004 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
    NF EN 61000-4-1 : 2007
    BS IEC 62003:2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - REQUIREMENTS FOR ELECTROMAGNETIC COMPATIBILITY TESTING
    PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
    BS EN 61000-1-2:2016 (published 2016-10) Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
    14/30282284 DC : 0 BS ISO 18185-3 - FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
    EN 62689-1 : 2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS (IEC 62689-1:2016)
    BS EN 60044-7 : 2000 INSTRUMENT TRANSFORMERS - PART 7 - ELECTRONIC VOLTAGE TRANSFORMERS
    CSA CEI/IEC 61000.4.15 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 15: FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
    BS EN 62689-1:2016 (published 2017-01) Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
    IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
    CSA C60044-7 : 2007 : R2016 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    BS PD IEC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
    IEC TR 61000-2-5:2017 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    CSA C60044-7 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    07/30174637 DC : DRAFT DEC 2007 BS EN 62305-4 - PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES
    CSA C60044-7 : 2007 INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
    IEC TS 61312-4:1998 Protection against lightning electromagnetic impulse - Part 4: Protection of equipment in existing structures
    IEC TR 61000-4-1:2016 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    DD ENV 14236 : 2002 ULTRASONIC DOMESTIC GAS METERS
    DIN EN 14236 E : 2008 ULTRASONIC DOMESTIC GAS METERS
    IEC TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
    DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
    BS EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    IEC 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
    IEC 61000-1-2:2016 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
    IEC 60044-7:1999 Instrument transformers - Part 7: Electronic voltage transformers
    IEC 60870-2-1:1995 Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
    BS EN 60870-2-1 : 1996 TELECONTROL EQUIPMENT AND SYSTEMS - OPERATING CONDITIONS - PART 2-1: POWER SUPPLY AND ELECTROMAGNETIC COMPATIBILITY
    14/30279327 DC : 0 BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    DD IEC PAS 60747-17 : 2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
    14/30302089 DC : 0 BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    13/30252777 DC : 0 BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
    12/30268049 DC : 0 BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
    09/30190333 DC : 0 BS EN 61400-24 - WIND TURBINES - PART 24: LIGHTNING PROTECTION
    ANSI C63.12:2015 RECOMMENDED PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY LIMITS AND TEST LEVELS
    IEEE 1899 : 2017 ESTABLISHING BASIC REQUIREMENTS FOR HIGH-VOLTAGE DIRECT-CURRENT TRANSMISSION PROTECTION AND CONTROL EQUIPMENT
    BS EN 809:1998+A1:2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    IEC 62003:2009 Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing
    EN 61800-3 : 2004 AMD 1 2012 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
    IEC TR 61000-2-5:2017 RLV Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
    EN 60870-2-1 : 1996 Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
    EN 61069-1:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS (IEC 61069-1:2016)
    EN 61000-4-1:2007 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    EN 61000-1-2 : 2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA (IEC 61000-1-2:2016)
    EN 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
    UNE-EN 809:1999 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    AS IEC 62040.2:2019 Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements
    IEC GUIDE 107:2014 Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications
    SA TR IEC 61000.2.5:2019 Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments
    IEC TR 61000-1-6:2012 Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective