![header thumbnail](/images/publishers\iso_cover.gif)
ISO 11960:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
![header thumbnail](/images/publishers\iso_cover.gif)
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
21-04-2020
French, English
15-01-2014
ISO 11960:2014 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2014. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.
By agreement between the purchaser and manufacturer, ISO 11960:2014 can also be applied to other plain-end pipe sizes and wall thicknesses.
ISO 11960:2014 is applicable to the following connections in accordance with API Spec 5B:
short round thread casing (SC);
long round thread casing (LC);
buttress thread casing (BC);
non-upset tubing (NU);
external upset tubing (EU);
integral tubing (IJ).
ISO 11960:2014 can also be applied to tubulars with connections not covered by ISO/API standards.
The four groups of products to which ISO 11960:2014 is applicable include the following grades of pipe:
Group 1: All casing and tubing in Grades H, J, K, N and R;
Group 2: All casing and tubing in Grades C, L, M and T;
Group 3: All casing and tubing in Grade P;
Group 4: All casing in Grade Q.
Casing sizes larger than Label 1: 4-1/2 but smaller than Label 1: 10-3/4 can be specified by the purchaser to be used in tubing service.
DevelopmentNote |
Supersedes ISO 2645 (04/2001) DRAFT ISO/DIS 11960 is also available for this standard. (05/2018)
|
DocumentType |
Standard
|
Pages |
278
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NBN EN ISO 11960 : 2014 | Identical |
NEN EN ISO 11960 : 2014 | Identical |
NS EN ISO 11960 : 2014 | Identical |
I.S. EN ISO 11960:2014 | Identical |
PN EN ISO 11960 : 2014 | Identical |
SN EN ISO 11960 : 2014 | Identical |
UNI EN ISO 11960 : 2014 | Identical |
SS-EN ISO 11960:2014 | Identical |
BS EN ISO 11960:2014 | Identical |
EN ISO 11960:2014 | Identical |
NF EN ISO 11960 : 2015 | Identical |
DIN EN ISO 11960:2014-05 | Identical |
ONORM EN ISO 11960 : 2014 | Identical |
UNE-EN ISO 11960:2014 | Identical |
SAC GB/T 19830 : 2017 | Identical |
DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
API 92U : 2008 : INC : ADD 1 : 2015 : R201300 | UNDERBALANCED DRILLING OPERATIONS |
API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
PREN 14199 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
API 10D-2 : 2004 : R2010 | RECOMMENDED PRACTICE FOR CENTRALIZER PLACEMENT AND STOP-COLLAR TESTING |
BS EN ISO 17348:2016 | Petroleum and natural gas industries. Materials selection for high content CO<sub>2</sub> environment for casings, tubings and downhole equipment |
BS PD ISO/TR 10400 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
13/30280743 DC : 0 | BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
14/30268531 DC : 0 | BS EN ISO 6892-1 - METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE |
17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
BS ISO 13679 : 2002 AMD 16774 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
API 10D-2 : 2004 : R2015 | RECOMMENDED PRACTICE FOR CENTRALIZER PLACEMENT AND STOP-COLLAR TESTING |
API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
API 5A3 REDLINE : 2009 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 10D : 2002 : R2010 | SPECIFICATION FOR BOW-STRING CASING CENTRALIZERS |
API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
I.S. EN ISO 17824:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
CSA Z341 SERIES : 2014 | STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS |
API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
BS EN 12699:2015 | Execution of special geotechnical works. Displacement piles |
I.S. EN 12699:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
I.S. EN ISO 15463:2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
CEN ISO/TS 16530-2:2015 | Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
API 92U : 2008 | UNDERBALANCED DRILLING OPERATIONS |
BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
04/19991491 DC : DRAFT DEC 2004 | BS ISO 10400 - PETROLEUM AND NATURAL GAS INDUSTRIES - FORMULAE AND CALCULATION FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2010 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
02/703231 DC : DRAFT FEB 2002 | BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
CEN ISO/TR 10400:2011 | Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2007) |
11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
07/30147011 DC : 0 | BS EN ISO 13678 - PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
BS ISO 17824 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
API 17C : 2002 : R2010 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
I.S. EN ISO 17348:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION FOR HIGH CONTENT CO[2] ENVIRONMENT FOR CASINGS, TUBINGS AND DOWNHOLE EQUIPMENT (ISO 17348:2016) |
I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
EN ISO 11961:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
API 19G1 : 2010 | SIDE-POCKET MANDRELS |
DIN EN 12699:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
DIN EN 14199:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
BS EN 10220:2002 | Seamless and welded steel tubes. Dimensions and masses per unit length |
ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
I.S. EN ISO 15546:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPE (ISO 15546:2011) |
EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN 14199:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES |
UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
NACE RP 02 91 : 2005 | CARE, HANDLING, AND INSTALLATION OF INTERNALLY PLASTIC-COATED OILFIELD TUBULAR GOODS AND ACCESSORIES |
API 92U : 2008 : R2013 | UNDERBALANCED DRILLING OPERATIONS |
API 90:2006 | ANNULAR CASING PRESSURE MANAGEMENT FOR OFFSHORE WELLS |
ONORM EN ISO 13679 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS (ISO 13679:2002) |
14/30304340 DC : 0 | BS EN ISO 17348 - PETROLEUM AND NATURAL GAS OFFSHORE PLATFORMS - GUIDELINES FOR MATERIALS SELECTION FOR HIGH CONTENT CO[2] ENVIRONMENT FOR CASINGS, TUBINGS AND DOWNHOLE EQUIPMENT |
02/712763 DC : DRAFT OCT 2002 | ISO 10427-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EQUIPMENT FOR WELL CEMENTING - PART 2: CENTRALIZER PLACEMENT AND STOP COLLAR TESTING |
BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
PD ISO/PAS 12835:2013 | Qualification of casing connections for thermal wells |
13/30284484 DC : 0 | BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION |
BS EN ISO 6892-1:2016 | Metallic materials. Tensile testing Method of test at room temperature |
BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
09/30179533 DC : DRAFT MAY 2009 | BS EN ISO 13679 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
08/30132226 DC : DRAFT MAR 2008 | BS ISO 13535 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT |
BS EN ISO 17824:2014 | Petroleum and natural gas industries. Downhole equipment. Sand screens |
API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
S.R. CEN ISO/TS 16530-2:2015 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
EN ISO 15463:2003/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
DIN EN ISO 15546:2011-12 | Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011); English version EN ISO 15546:2011 |
BS EN ISO 13679:2006 | Petroleum and natural gas industries. Procedures for testing casing and tubing connections |
ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
BS EN ISO 10427-1:2002 | Petroleum and natural gas industries. Casing centralizers Bow-spring casing centralizers |
BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
ISO 15546:2011 | Petroleum and natural gas industries — Aluminium alloy drill pipe |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
ISO 10405:2000 | Petroleum and natural gas industries — Care and use of casing and tubing |
ISO 10427-2:2004 | Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
UNI EN ISO 15463 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
UNI EN ISO 15546 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPE |
UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
UNI EN ISO 13678 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
03/305165 DC : DRAFT MAR 2003 | ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
API 10D-2 : 2004 | RECOMMENDED PRACTICE FOR CENTRALIZER PLACEMENT AND STOP-COLLAR TESTING |
07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
BS EN ISO 15551-1:2015 | Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
I.S. EN ISO 13679:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
BS ISO 10405 : 2000 | PETROLEUM AND NATURAL GAS INDUSTRIES - CARE AND USE OF CASING AND TUBING |
PD CEN ISO/TR 10400:2011 | Petroleum and natural gas industries. Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
07/30172770 DC : 0 | BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT |
BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
ISO 10427-1:2001 | Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers |
API 5A5 CHINESE : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
02/702536 DC : DRAFT FEB 2002 | PREN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
BS EN ISO 13678:2012 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
API 10D:2002 | SPECIFICATION FOR BOW-STRING CASING CENTRALIZERS |
API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
DIN SPEC 91087 : 2016 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
13/30217541 DC : 0 | BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
API HF1 : 2009 | HYDRAULIC FRACTURING OPERATIONS - WELL CONSTRUCTION AND INTEGRITY GUIDELINES |
DIN CEN ISO/TS 16530-2;DIN SPEC 91087:2016-05 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
CSA Z341 SERIES-14 PACKAGE : 2014 | CONSISTS OF Z341 SERIES-14, STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS AND Z341.4-14, SALT CAVERN WASTE DISPOSAL |
API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
I.S. EN ISO 6892-1:2016 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
I.S. EN ISO 15551-1:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
UNI EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
S.R. CEN ISO TR 10400:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
ISO/TR 10400:2007 | Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
I.S. EN ISO 13678:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS (ISO 13678:2010) |
EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
UNE-EN ISO 6892-1:2017 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
BS EN ISO 10427-2:2004 | Petroleum and natural gas industries. Equipment for well cementing Centralizer placement and stop-collar testing |
ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
ISO 15463:2003 | Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe |
ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
ISO 17824:2009 | Petroleum and natural gas industries Downhole equipment Sand screens |
BS EN ISO 10417:2004 | Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress |
BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
BS EN ISO 13628-3:2001 | Petroleum and natural gas industries. Design and operation of subsea production systems Through flowline (TFL) systems |
BS EN ISO 15546:2011 | Petroleum and natural gas industries. Aluminium alloy drill pipe |
ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 17348:2016 | Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment |
BS EN ISO 15463:2003 | Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe |
ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
EN ISO 10427-2:2004 | Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing (ISO 10427-2:2004) |
EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
EN ISO 17348:2016 | Petroleum and natural gas industries - Materials selection for high content CO2 environment for casings, tubings and downhole equipment (ISO 17348:2016) |
EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
EN ISO 13679:2006 | Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002) |
EN ISO 10427-1:2001 | Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001) |
EN ISO 13628-3:2000 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 15546:2011 | Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011) |
EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
EN ISO 10405 : 2006 | Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2006) |
EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN ISO 10417:2004 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
EN 14199:2015 | Execution of special geotechnical works - Micropiles |
EN ISO 15551-1:2015 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
EN ISO 13678:2012 | Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010) |
BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
API SPEC 10D:2002(R2015) | SPECIFICATION FOR BOW-STRING CASING CENTRALIZERS |
08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
01/708298 DC : DRAFT MAY 2001 | ISO/DIS 13679.2 - PETROLEUM AND NATURAL GAS INDUSTRIES - TESTING PROCEDURES FOR CASING AND TUBING CONNECTIONS |
API 90 : 2006 : R2012 | ANNULAR CASING PRESSURE MANAGEMENT FOR OFFSHORE WELLS |
03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
PD CEN ISO/TS 16530-2:2015 | Well integrity Well integrity for the operational phase |
DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
BS ISO 13678:2000 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
API 5A3 RUSSIAN : 2015 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2015 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
API 17 C : 2002 | RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS |
DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
API 14B RUSSIAN : 2005 | DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS |
API 5A5 : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
API SPEC 10D CHINESE : 2002 | SPECIFICATION FOR BOW-STRING CASING CENTRALIZERS |
NORSOK D 010 : 2013 | WELL INTEGRITY IN DRILLING AND WELL OPERATIONS |
UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
ISO/PAS 12835:2013 | Qualification of casing connections for thermal wells |
I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
NACE 21413 : 2017 | PREDICTION OF INTERNAL CORROSION IN OILFIELD SYSTEMS FROM SYSTEM CONDITIONS |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
BS EN ISO 10405:2006 | Petroleum and natural gas industries. Care and use of casing and tubing |
BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
01/715268 DC : DRAFT NOV 2001 | BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
BS EN 14199:2015 | Execution of special geotechnical works. Micropiles |
I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
API 5T1 : 2017 | IMPERFECTION AND DEFECT TERMINOLOGY |
ISO 10893-3:2011 | Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
API 5CT : 2012 | CASING AND TUBING |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
API 5A2 : 6ED 88 | BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE |
ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
ISO/TR 10400:2007 | Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
ASTM E 543 : 2015 : REDLINE | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
API TR 5C3 : 2008 | CALCULATING PERFORMANCE PROPERTIES OF PIPE USED AS CASING OR TUBING |
ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.