ISO 19879:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
06-04-2021
Superseded by
Language(s)
French, English
Published date
03-09-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. ISO 19879:2010 does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 7241-2.
Tests outlined in ISO 19879:2010 are independent of each other and document the method to follow for each test. See the appropriate component International Standard for which tests to conduct and for performance criteria.
For qualification of the connector, the minimum number of samples specified in ISO 19879:2010 is tested, unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer and the user.
| DevelopmentNote |
Supersedes ISO 8434-5 (08/2005) Supersedes SAE J 1644. (09/2007) Supersedes ISO/DIS 19879. (09/2010)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 19879 : 2010 | Identical |
| DIN EN ISO 19879:2011-01 | Identical |
| NBN EN ISO 19879 : 2010 | Identical |
| NEN EN ISO 19879 : 2010 | Identical |
| I.S. EN ISO 19879:2010 | Identical |
| PN EN ISO 19879 : 2011 | Identical |
| SN EN ISO 19879 : 2011 | Identical |
| UNI EN ISO 19879 : 2011 | Identical |
| UNE-EN ISO 19879:2010 | Identical |
| EN ISO 19879:2010 | Identical |
| NF EN ISO 19879 : 2010 | Identical |
| NS EN ISO 19879 : 1ED 2010 | Identical |
| BS EN ISO 19879:2010 | Identical |
| 13/30265681 DC : 0 | BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD |
| 05/30125061 DC : DRAFT MAR 2005 | ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS |
| BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| SAE J 2614 : 2018 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| BS ISO 8434-2:2007 | Metallic tube connections for fluid power and general use 37° flared connectors |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| BS EN ISO 1179-3:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| BS ISO 12151-5:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 15171-2:2016 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
| I.S. EN ISO 1179-2:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| PD ISO/TR 10771-2:2008 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ONORM EN ISO 1179-2 : 2014 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS ISO 6149-3:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| 10/30196989 DC : 0 | BS ISO 12933 - AGRICULTURAL TRACTORS - REQUIREMENTS FOR BRAKING |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| 14/30287198 DC : 0 | BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE |
| BS ISO 12151-6:2009 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS ISO 6149-2:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements. |
| ONORM EN ISO 8434-1 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| UNI ISO 12151-6 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| 06/30155963 DC : DRAFT SEP 2006 | BS ISO 10998 - AGRICULTURAL TRACTORS - REQUIREMENTS FOR STEERING |
| 07/30163202 DC : 0 | BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| MIL-DTL-6001 Revision B:2013 | FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
| I.S. EN ISO 1179-4:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
| BS ISO 8434-3:2005 | Metallic tube connections for fluid power and general use O-ring face seal connectors |
| BS ISO 10998 : 2008 | AGRICULTURAL TRACTORS - REQUIREMENTS FOR STEERING |
| BS ISO 12151-1 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| UNI ISO 8434-2 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS |
| EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| SAE J 2658 : 2013 | CARBON AND STEEL ALLOY TUBE CONDUCTOR ASSEMBLIES FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER METALLIC TUBE ASSEMBLIES |
| 09/30199060 DC : 0 | BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| UNI ISO 12151-3 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| ISO/TR 10771-2:2008 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| 04/30124527 DC : DRAFT OCT 2004 | ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS |
| DIN EN ISO 1179-2:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| BS EN ISO 1179-2:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 14/30283312 DC : 0 | BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| UNI EN ISO 1179-4 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS ISO 12151-3:2010 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| SAE J 2613 : 2017 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| UNI EN ISO 1179-3 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| SAE J 2467 : 2020 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| BS EN ISO 1179-4:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B) |
| 04/30124525 DC : DRAFT OCT 2004 | ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| SAE J 2337-1 : 2014 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| SAE J533_201702 | FLARES FOR TUBING |
| UNI ISO 8434-3 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| UNE-EN ISO 1179-2:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| BS EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007) |
| EN ISO 1179-2:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN ISO 1179-3:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) |
| EN ISO 1179-4:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007) |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| BS ISO 12151-4:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends |
| DIN EN ISO 1179-4:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS ISO 15171-2:2016 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure |
| 12/30260523 DC : 0 | BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012) |
| DIN EN ISO 1179-3:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| 07/30163197 DC : 0 | BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| NF ISO 12151-6 : 2009 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS |
| 04/30124528 DC : DRAFT OCT 2004 | ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| NF ISO 12151-1 : 2010 AMD 1 2017 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| 09/30199068 DC : 0 | BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS |
| NF ISO 8434-6 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| UNI ISO 12151-4 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS |
| ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| I.S. EN ISO 1179-3:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ISO 10998:2008 | Agricultural tractors — Requirements for steering |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| UNI EN ISO 1179-2 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| NF ISO 12151-3 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| BS EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| DIN ISO 12151-3:2012-08 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |
| ONORM EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| ISO 11926-2:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 6162-2:2012 | Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 11926-3:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends |
| ISO/TR 11340:1994 | Rubber and rubber products Hydraulic hose assemblies External leakage classification for hydraulic systems |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.