PREN 12514-2 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
ISO 272:1982
|
Fasteners — Hexagon products — Widths across flats |
EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
EN 13480-6:2017
|
Metallic industrial piping - Part 6: Additional requirements for buried piping |
EN 13349:2002
|
Copper and coppper alloys - Pre-insulated copper tubes with solid covering |
EN 1254-3:1998
|
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
ISO 2578:1993
|
Plastics Determination of time-temperature limits after prolonged exposure to heat |
ISO 1179-1:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
EN ISO 15875-2:2003/A1:2007
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES |
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
EN ISO 1179-3:2008
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) |
EN 754-3:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
EN 754-7:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN ISO 1179-1:2013
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
EN 755-5:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
EN ISO 19879:2010
|
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
EN 1591-1:2013
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN ISO 8434-4 : 2000
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
EN 728:1997
|
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
EN ISO 9974-3:2000
|
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
EN ISO 21003-3:2008
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
EN ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
ISO 12151-2:2003
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
EN 755-3:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
ISO 6605:2017
|
Hydraulic fluid power — Test methods for hoses and hose assemblies |
EN ISO 2578 : 1998
|
PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
ISO 7005-3:1988
|
Metallic flanges Part 3: Copper alloy and composite flanges |
EN 1092-3:2003/AC:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN ISO 1179-2:2013
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
ISO 6162:1994
|
Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
EN 755-8:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
DIN 7603:2001-05
|
Sealing rings |
ISO 9974-1:1996
|
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports |
EN 755-4:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
ISO 9974-3:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 15875-2:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN 755-7:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN ISO 21003-2:2008/A1:2011
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011) |
EN ISO 9080:2012
|
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
EN 14125:2013
|
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
EN 754-6:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
ISO 6162-2:2012
|
Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
ISO 15874-2:2013
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes |
ISO 12151-5:2007
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
EN 755-6:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
ISO 1179-4:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
EN 13480-3:2017
|
Metallic industrial piping - Part 3: Design and calculation |
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
ISO 6149-3:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
EN 1092-4:2002
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
ISO 12151-3:2010
|
Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
EN ISO 21003-1:2008
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
ISO 8434-3:2005
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
ISO 6162-1:2012
|
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
ISO 19879:2010
|
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN ISO 9974-1:2000
|
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996) |
EN ISO 1179-4 : 2008
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007) |
EN 15014:2007
|
Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
ISO 6508:1986
|
Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
EN 10241:2000
|
Steel threaded pipe fittings |
EN 754-5:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
ISO 6149-1:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
ISO 21003-2:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
ISO 8434-4:1995
|
Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
EN ISO 8434-1:2007/AC:2009
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
ISO 21003-1:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
EN 754-8:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
ISO 12151-1:2010
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
EN 754-2:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 21003-3:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
ISO 12151-4:2007
|
Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
EN ISO 15874-2:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013) |
PREN 12514-3 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
ISO 1179-2:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
EN 10242:1994/A2:2003
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON |
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
EN 1267:2012
|
Industrial valves - Test of flow resistance using water as test fluid |
ISO 3448:1992
|
Industrial liquid lubricants — ISO viscosity classification |
EN 754-4:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
PREN 12514-1 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 13160-1:2016
|
Leak detection systems - Part 1: General Principles |
ISO 6149:1980
|
Fluid power systems and components Metric ports Dimensions and design |
EN 755-2:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
ISO 1179-3:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
EN 14585-1:2006
|
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |