Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

03-10-2024

Superseded by

ISO 4892-3:2024

Language(s)

English, French

Published date

15-02-2016

Publisher

International Organization for Standardization

€60.00

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

ISO 4892-3:2016 specifies methods for exposing specimens to fluorescent UV radiation, heat and water in apparatus designed to simulate the weathering effects that occur when materials are exposed in actual end-use environments to global solar radiation, or to solar radiation through window glass.

The specimens are exposed to fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp can be used to meet all the requirements for testing different materials.

Specimen preparation and evaluation of the results are covered in other International Standards for specific materials.

General guidance is given in ISO 4892‑1.

NOTE Fluorescent UV lamp exposures for paints, varnishes and other coatings are described in ISO 11507.

Committee	ISO/TC 61/SC 6
DevelopmentNote	Supersedes ISO 4892. (04/2001) Supersedes ISO/DIS 4892-3. (02/2016)
DocumentType	Standard
Pages	16
PublisherName	International Organization for Standardization
Status	Superseded
SupersededBy	ISO 4892-3:2024
Supersedes	ISO 4892:1981 ISO 4892-3:2013
UnderRevision	ISO/FDIS 4892-3

Standards	Relationship
DIN EN ISO 4892-3:2016-10	Identical
NS EN ISO 4892-3 : 2016	Identical
I.S. EN ISO 4892-3:2016	Identical
UNE-EN ISO 4892-3:2016	Identical
PN EN ISO 4892-3 : 2016	Identical
DIN EN ISO 4892-3:2000-10	Identical
NBN EN ISO 4892-3 : 2016	Identical
BS EN ISO 4892-3:2016	Identical
SS-EN ISO 4892-3:2016	Identical
SN EN ISO 4892-3:2016	Identical
UNI EN ISO 4892-3:2016	Identical
NEN EN ISO 4892-3 : 2016	Identical
NF EN ISO 4892-3 : 2016	Identical
EN ISO 4892-3:2016	Identical
UNI EN ISO 4892-3 : 2014	Identical
IS 17863 : Part 3 : 2022	Identical
DS EN ISO 4892-3 : 2016	Identical
BS 2782-5.540F(1995) : AMD 10678	Identical
SAC GB/T 16422.3 : 1997	Identical

I.S. EN 16434:2014-2014-08	INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
17/30354650 DC : DRAFT SEP 2017	BS EN 71-14 - SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
08/30195225 DC : 0	BS EN 60684-3-283 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION
PD CEN/TS 16599:2014	Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
I.S. EN IEC 60099-8:2018	SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
12/30259268 DC : 0	BS ISO 14186 - AIR CARGO - FIRE CONTAINMENT COVERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
BS ISO 13125:2013	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
DIN EN 13245-3:2010-11	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
PD CEN/TS 15912:2012	Durability of reaction to fire performance. Classes of fire-retardant treated wood-based product in interior and exterior end use applications
14/30303794 DC : 0	BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
DIN EN 16268:2013-04	PERFORMANCE OF REFLECTING SURFACES FOR LUMINAIRES
CEI EN 62561-4 : 2012	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
PREN 438-2 : DRAFT 2014	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 16438:2012	Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods
ISO 9679:2006	Aerospace Clamps for fluid systems Test methods
ISO 23560:2015	Woven polypropylene sacks for bulk packaging of foodstuffs
16/30303046 DC : 0	BS ISO 19810 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SELF-CLEANING PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - MEASUREMENT OF WATER CONTACT ANGLE
11/30233259 DC : 0	BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
12/30266874 DC	BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
DIN EN 15619 E : 2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
BS ISO 27448:2009	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle
14/30310352 DC : 0	BS EN 12200-1 - PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
11/30229694 DC : 0	BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
13/30263803 DC : 0	BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
12/30258334 DC : 0	BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
16/30296842 DC : 0	BS ISO 17168-3 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 3: REMOVAL OF TOLUENE
I.S. EN 62561-4:2017	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
I.S. EN 61753-111-7:2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
BS EN 1096-5:2016	Glass in building. Coated glass Test method and classification for the self-cleaning performances of coated glass surfaces
DIN ISO 16938-1:2012-12	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008)
BS ISO 11617:2014	Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
BS EN ISO 30013:2011	Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
BS EN 50526-1:2012	Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
15/30328730 DC : 0	BS EN 60794-1-22 - OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
DIN EN 16434:2014-06	INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
BS EN 60794-1-22:2012	Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods
12/30256977 DC : 0	BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
I.S. EN 17098-1:2018	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
BS ISO 12319:2006	Aerospace. \'P\' (loop style) clamps. Procurement specification
BS IEC 62790 : 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
OIML R 46-1 & 2 : 2012	ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
CEI EN 62561-6 : 2012	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
16/30296845 DC : 0	BS ISO 17168-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 4: REMOVAL OF FORMALDEHYDE
11/30235144 DC : 0	BS ISO 16438 - AGRICULTURAL IRRIGATION EQUIPMENT - THERMOPLASTIC COLLAPSIBLE HOSES FOR IRRIGATION - SPECIFICATIONS AND TEST METHODS
PD CEN ISO/TR 18486:2017	Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
BS ISO 16938-2:2008	Building construction. Determination of the staining of porous substrates by sealants used in joints Test without compression
09/30176542 DC : 0	BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
09/30179580 DC : 0	BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
PREN 13523-10 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
ISO 4665:2016	Rubber, vulcanized or thermoplastic — Resistance to weathering
PREN 3838 : 200P2	AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES
ISO 22197-2:2011	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 2: Removal of acetaldehyde
EN IEC 60068-2-5:2018	Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
CEI EN 50526-1 : 2013	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
ISO 12319:2006	Aerospace 'P' (loop style) clamps Procurement specification
DIN EN 71-14:2015-03	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
EN 4674-004:2017	Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
CEI EN 61643-11 : 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 61753-111-8:2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
BS EN 15619:2014	Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
BS ISO 22197-1:2016	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of nitric oxide
BS EN 50548 : 2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
CEI EN 50341-2-18 : 1ED 2017	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-18: NATIONAL NORMATIVE ASPECTS (NNA) FOR SWEDEN (BASED ON EN 50341-1:2012)
ISO 22197-3:2011	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 3: Removal of toluene
I.S. EN 50548:2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
IEC 62561-4:2010	Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
UNE-EN 60099-4:2016	Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
ISO 16840-6:2015	Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions
17/30356734 DC : 0	BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
UNE-EN ISO 30013:2012	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
BS EN 71-14 : 2014	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
NF EN 61753-111-8 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
NF EN 61753-111-9 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
BS ISO 22197-3:2011	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of toluene
I.S. EN 61753-111-9:2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
I.S. EN 13655:2018	PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
I.S. EN 15619:2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
IEC TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
EN 13206:2017	Plastics - Thermoplastic covering films for use in agriculture and horticulture
DIN EN 13484:2012-05	Helmets for users of luges
DIN EN 12492:2012-04	MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1078:2014-04	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
DIN EN ISO 11507:2007-05	PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
15/30292344 DC : 0	BS ISO 19281 - AIR CARGO - FIRE RESISTANT CONTAINERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
BS EN 13785 : 2005	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNE-EN 12200-1:2017	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
BS EN 12224:2000	Geotextiles and geotextile-related products. Determination of the resistance to weathering
BS IEC 62852 : 2014	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 13786 : 2004	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 1297:2004	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water
BS EN 1790:2013	Road marking materials. Preformed road markings
BS EN 13484:2012	Helmets for users of luges
BS EN 966 : 2012	HELMETS FOR AIRBORNE SPORTS
BS EN ISO 9142:2003	Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 12492:2012	Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN ISO 11403-3:2014	Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
BS EN 1384:2017	Helmets for equestrian activities
I.S. EN 10223-7:2012	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
I.S. EN 812:2012	INDUSTRIAL BUMP CAPS
EN 60099-4:2014	Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN 1078:2012+A1:2012	Helmets for pedal cyclists and for users of skateboards and roller skates
EN 16129:2013	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
EN 10223-8:2013	Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 10223-7:2012	Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
EN 62134-1:2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN 10223-3:2013	Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN 10245-1:2011	Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
EN 10245-2:2011	Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 16755:2017	Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
EN 61753-111-9:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 10245-3:2011	Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 1013:2012+A1:2014	Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
EN 10245-5:2011	Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 13245-3:2010	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
ENV 12224 : 1996	GEOTEXTILES AND GEOTEXTILE RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
EN 50289-4-17:2015	Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
EN 50526-2:2014	Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
EN 61753-111-7:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
PREN 1871 : DRAFT 2012	ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
DIN EN 10245-5:2012-01	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
09/30200407 DC : 0	BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
12/30265310 DC : 0	BS EN 124-5 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE FROM COMPOSITE MATERIALS
BS EN 16268:2013	Perfomance of reflecting surfaces for luminaires
14/30299825 DC : 0	BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
07/30166797 DC : 0
15/30317639 DC : 0	BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
11/30244571 DC : 0	BS EN 1096-5 - GLASS IN BUILDING - COATED GLASS - PART 5: TEST METHOD AND CLASSIFICATION FOR THE SELF-CLEANING PERFORMANCES OF COATED GLASS SURFACES
PD ISO/TS 19022:2016	Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
BS EN IEC 60794-1-22:2018	Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods
BS EN 16129:2013	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
I.S. EN 62790:2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
14/30313367 DC : 0	BS ISO 19862 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DURABILITY TO EXTENSION COMPRESSION CYCLING UNDER ACCELERATED WEATHERING
BS EN 4674-003:2017	Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve Open sleeve. Inside pressurized area. EMI protection 5 kA. Temperature range - 65 °C to 200 °C. Product standard
BS IEC 60092-306:2009	Electrical installations in ships Equipment. Luminaires and lighting accessories
NF EN 61753-111-7 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
14/30267388 DC : 0	BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
BS ISO 16938-1:2008	Building construction. Determination of the staining of porous substrates by sealants used in joints Test with compression
I.S. EN 12864:2001	LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS ISO 4665:2016	Rubber, vulcanized or thermoplastic. Resistance to weathering
15/30326957 DC : 0	BS EN 62561-4 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
BS EN 10223-8:2013	Steel wire and wire products for fencing and netting Welded mesh gabion products
11/30215685 DC : 0	BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
BS PD ISO/TR 18486 : 2016	PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE
08/30195213 DC : 0	BS EN 60684-3-280 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING
I.S. EN 12224:2000	GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
10/30205800 DC : 0	BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
BS EN 61753-111-7:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30199648 DC : DRAFT MAY 2011	BS ISO 13125 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIFUNGAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS
05/30129278 DC : DRAFT FEB 2005	ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
08/30159870 DC : DRAFT APR 2008	BS EN 60800 - HEATING CABLES WITH A RATED VOLTAGE OF 300/500 V FOR COMFORT HEATING AND PREVENTION OF ICE FORMATION
PREN 16129 : DRAFT 2010	PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
15/30316094 DC : DRAFT FEB 2015	BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
BS EN 10245-5:2011	Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
DIN EN 124-6:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
I.S. EN 71-14:2014	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
EN 61753-111-8:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
BS EN 50526-2:2014	Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices
13/30271610 DC : 0	BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
16/30317340 DC : 0	BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
11/30246708 DC : 0	BS EN 62561-6 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
BS EN 62561-4:2017	Lightning protection system components (LPSC) Requirements for conductor fasteners
UNI EN 16434 : 2014	INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
EN IEC 62677-2:2018	Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
07/30127278 DC : 0	BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
09/30167595 DC : 0	BS EN 60099-8 ED.1 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
08/30180835 DC : DRAFT JUNE 2008	BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN 14811:2008-01	FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
I.S. EN 4674-003:2017	AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - INSIDE PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
BS ISO 9370:2017	Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
I.S. EN 16314:2013	GAS METERS - ADDITIONAL FUNCTIONALITIES
ISO 12619-2:2014	Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods
I.S. EN 60068-2-5:2011	ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
ISO/TS 19022:2016	Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
DIN EN 16434 E : 2014	INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
EN ISO 11403-3:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
I.S. EN 16268:2013	PERFORMANCE OF REFLECTING SURFACES FOR LUMINAIRES
EN IEC 60099-8:2018	Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
ISO/TS 19392-1:2018	Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering
I.S. EN 1176-1:2017	PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
UNE-IEC 60092-306:2010	Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
I.S. EN IEC 62677-2:2018	HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
I.S. EN 927-6:2006	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
I.S. EN 62134-1:2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN IEC 60794-1-22:2018	OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
I.S. EN 10223-8:2013	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
OVE/ONORM EN 62852 : 2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS (IEC 62852:2014)
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
UNE-EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
CEI EN 60068-2-5 : 2012	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
ISO 19862:2015	Buildings and civil engineering works Sealants Durability to extension compression cycling under accelerated weathering
IEC 60794-1-22:2017	Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
I.S. EN 124-6:2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
ISO/TR 18486:2016	Plastics Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
BS EN 927-6:2006	Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN 50341-2-18:2016	Overhead electrical lines exceeding AC 1 kV - Part 2-18: National Normative Aspects (NNA) for Sweden (based on EN 50341-1:2012)
PREN 14932 : DRAFT 2016	PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
CEN ISO/TR 18486:2017	Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016)
CEI EN 60099-4 : 2015	SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
IEC TS 62561-8:2018	Lightning protection system components (LPSC) - Part 8: Requirements for components for isolated LPS
UNE-EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
BS EN 14836:2005	Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering
EN 927-6:2006	Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN 14236:2007	Ultrasonic domestic gas meters
DIN EN 12864:2006-03	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 13523-10:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
DIN EN 13206:2015-09 (Draft)	PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
DIN EN 14836:2015-03 (Draft)	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
DIN EN 14236:2008-06	ULTRASONIC DOMESTIC GAS METERS
BS EN 1385:2012	Helmets for canoeing and white water sports
BS EN 438-2 : 2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN ISO 11997-2:2013	Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light
DIN EN 12864 E : 2006 AMD 3 2010	LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
I.S. EN 10223-3:2013	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
I.S. EN 1384:2017	HELMETS FOR EQUESTRIAN ACTIVITIES
I.S. EN 10245-2:2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN 10245-1:2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN ISO 16474-3:2013	Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
I.S. EN 1790:2013	ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
I.S. EN 607:2004	EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
I.S. EN 1078:2012	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
DIN EN 1297:2004-12	Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water; German version EN 1297:2004
I.S. EN 12492:2012	MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11997-2:2013	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
I.S. EN 397:2012	INDUSTRIAL SAFETY HELMETS
I.S. EN ISO 4892-1:2016	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
I.S. EN 12200-1:2016	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 966:2012	HELMETS FOR AIRBORNE SPORTS
I.S. EN ISO 11403-3:2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
I.S. EN 13523-10:2017	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
OVE/ONORM EN 60684-3-280 : 2014	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING (IEC 60684-3-280:2010 + A1:2013)
I.S. EN 1385:2012	HELMETS FOR CANOEING AND WHITE WATER SPORTS
I.S. EN 13484:2012	HELMETS FOR USERS OF LUGES
OVE/ONORM EN 60684-3-283 : 2014	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION (IEC 60684-3-283:2010 + A1:2013)
DIN EN 1790:2013-12	ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
I.S. EN 10245-3:2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
OVE/ONORM EN 61753-111-8 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
VDI 4487:2017-07	Examination of quality-related properties of stretch film - Valuation methods, and criteria
VDI 3822 Blatt 2.1.8:2012-01	Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 3958 Blatt 10:2012-01	Environmental simulation - Exposure of materials to gaseous air pollutants
VDI 3958 Blatt 12:2004-02	Environmental simulation - Effects of acidic precipitation on polymers - Test methods
BS 2782-5.540D(1999) : 1999 AMD 13148	METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
ONORM EN 3838 : 2011	AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES
PREN 62561-6 : DRAFT 2011	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
UNI CEN/TS 16599 : 2014	PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS
17/30356577 DC : 0	BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
10/30228056 DC : 0
06/30130308 DC : 0	ISO 23560 - PLASTICS - FILM AND SHEETING - POLYPROPYLENE WOVEN SACKS FOR BULK PACKAGING OF EDIBLE COMMODITIES
BS ISO 15686-2:2012	Buildings and constructed assets. Service life planning Service life prediction procedures
DIN EN 1013:2015-03	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 62790:2015	Junction boxes for photovoltaic modules. Safety requirements and tests
09/30214460 DC : 0	BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS ISO 19862:2015	Buildings and civil engineering works. Sealants. Durability to extension compression cycling under accelerated weathering
I.S. EN ISO 11507:2007	PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
PREN 12200-1 : DRAFT 2014	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DD ENV 12224:1997	Geotextiles and geotextile-related products. Determination of the resistance to weathering
05/30137842 DC : DRAFT AUG 2005	ISO 9679 - AEROSPACE - CLAMPS FOR FLUID SYSTEMS - TEST METHODS
BS EN 50289-4-17:2015	Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
14/30281866 DC : 0	BS ISO 18178 - GLASS IN BUILDING - LAMINATED SOLAR PV GLASS
BS ISO 22197-4:2013	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of formaldehyde
BS EN 16434:2014	Internal blinds. Protection from strangulation hazards. Requirements and test methods for safety devices
I.S. EN 4674-004:2017	AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - OUTSIDE PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
UNI EN 3838 : 2011	AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES
UNI CEN/TS 15912 : 2012	DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
07/30164787 DC : 0	EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
DIN EN 13245-2:2010-11	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009)
ISO 11617:2014	Buildings and civil engineering works Sealants Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
BS EN 60099-8:2011	Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
BS EN 1013 : 2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
08/30166877 DC : DRAFT FEB 2008	BS ISO 27447 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS
12/30266871 DC : 0	BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
08/30194094 DC : 0	BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS ISO 16438:2012	Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
15/30323590 DC : 0	BS ISO 22197-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE
DIN EN ISO 30013:2012-03	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
UNE-ISO 22197-1:2012	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Part 1: Removal of nitric oxide
09/30181336 DC : DRAFT AUG 2009	BS ISO 22197-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 2: REMOVAL OF ACETALDEHYDE
16/30296833 DC : 0	BS ISO 17168-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 5: REMOVAL OF METHYL MERCAPTAN
13/30280551 DC : 0	BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS
03/304727 DC : DRAFT OCT 2003	ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION
DIN ISO 16938-2:2012-12	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 2: TEST WITHOUT COMPRESSION (ISO 16938-2:2008)
17/30335121 DC : 0	BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
UNE-EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
16/30345769 DC : 0	BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
02/121747 DC : DRAFT APR 2002	PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
06/30156520 DC : DRAFT SEP 2006	BS ISO 22197-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - REMOVAL OF NITRIC OXIDE
I.S. EN 50289-4-17:2015	COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
UNE-EN 16129:2014	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
12/30229888 DC : 0	BS EN ISO 16474-3 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
NF EN 60684-3-280 : 2010 AMD 1 2014	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING
UNI EN 13245-2 : 2009	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
08/30180838 DC : DRAFT JUNE 2008	BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
PREN 4674-004 : 200P1	AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - OUTSIDE PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
BS EN 60684-3-280 : 2010	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING
UNE-EN 16755:2018	Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
UNE-EN 71-14:2015	Safety of toys - Part 14: Trampolines for domestic use
ISO 13125:2013	Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials
I.S. EN ISO 30013:2011	RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
I.S. EN 61643-11:2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
PREN 50289-4-17 : DRAFT 2014	COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
I.S. EN ISO 29664:2017	PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
EN 62561-4:2017	Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
UNE-EN ISO 29664:2017	Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
I.S. EN 14236:2007	ULTRASONIC DOMESTIC GAS METERS
S.R. CEN ISO/TR 18486:2017	PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE (ISO/TR 18486:2016)
IEC 60099-8:2017	Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
I.S. EN 124-5:2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
CEI EN 61753-111-8 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
PREN 50526-1 : DRAFT 2009	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN 13245-3:2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
PREN 13655 : DRAFT 2016	PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
ISO 19281:2016	Air cargo Fire resistant containers Design, performance and testing requirements
UNE-EN ISO 15110:2018	Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
UNE-EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
UNE-CEN/TS 15912:2012 EX	Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
EN 17098-1:2018	Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
DIN EN 438-2:2016-06	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 1384 : DRAFT 2014	HELMETS FOR EQUESTRIAN ACTIVITIES
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
UNI EN 13245-3 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
IEC 60800:2009	Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
EN 13655:2018	Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
NF EN 62134-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. ENV 10169-2:1999	CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 71-14 : 2014 COR 2017	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
EN 14932:2018	Plastics - Thermoplastic stretch films for wrapping silage bales
I.S. EN 13207:2018	PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
EN 1176-1:2017	Playground equipment and surfacing - Part 1: General safety requirements and test methods
DIN EN 1385:2012-04	HELMETS FOR CANOEING AND WHITE WATER SPORTS
DIN EN 1384:2015-02 (Draft)	HELMETS FOR EQUESTRIAN ACTIVITIES
BS EN 13206:2017	Plastics. Thermoplastic covering films for use in agriculture and horticulture
DIN EN ISO 11997-2:2013-12	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
DIN EN 812:2012-04	INDUSTRIAL BUMP CAPS
DIN EN 13786:2010-07	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 13785:2010-05	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN ISO 11403-3:2014-09	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN 13206:2017-05	PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
BS EN 1078 : 2012	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
BS EN 397 : 2012	INDUSTRIAL SAFETY HELMETS
UNE-EN 1790:2015	Road marking materials - Preformed road markings
BS EN 10245-3:2011	Steel wire and wire products. Organic coatings on steel wire PE coated wire
UNE-EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
UNE-EN 10223-3:2014	Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
DIN EN 1384:2012-05	HELMETS FOR EQUESTRIAN ACTIVITIES
EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
EN ISO 29664:2017	Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
UNI EN 13484 : 2012	HELMETS FOR USERS OF LUGES
UNI EN 10223-8 : 2014	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNI EN 10245-3 : 2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
UNI EN 397 : 2013	INDUSTRIAL SAFETY HELMETS
UNI EN ISO 11997-2 : 2014	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
UNI EN 10223-7 : 2013	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN 10245-1 : 2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 10245-2 : 2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNI EN 966 : 2013	HELMETS FOR AIRBORNE SPORTS
UNI EN 1385 : 2012	HELMETS FOR CANOEING AND WHITE WATER SPORTS
UNI EN 12492 : 2012	MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
EN 607:2004	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNI EN 12864 : 2010	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 15619 : 2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
UNI EN 1790 : 2013	ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
UNI EN 10223-3 : 2014	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
UNI EN 812 : 2012	INDUSTRIAL BUMP CAPS
UNI EN 13786 : 2009	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 1078 : 2013	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
UNI EN 13785 : 2009	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNE-EN ISO 16474-3:2014	Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
S.R. CEN/TS 15912:2012	DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
UNI EN 16129 : 2013	PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
11/30199652 DC : 0	BS ISO 22197-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 4: REMOVAL OF FORMALDEHYDE
16/30328596 DC : 0	BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
BS EN 16314:2013	Gas meters. Additional functionalities
PREN 927-6 : DRAFT 2016	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER
EN IEC 60794-1-22:2018	Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
UNI EN ISO 30013 : 2011	RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
BS EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials
PREN 14236 : DRAFT 2017	ULTRASONIC DOMESTIC GAS METERS
02/207432 DC : DRAFT JUN 2002	IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS
08/30186163 DC : DRAFT JULY 2008	BS IEC 60092-306 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 306: EQUIPMENT - LUMINAIRES AND LIGHTING ACCESSORIES
UNI EN 10245-5 : 2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
UNI EN ISO 16474-3 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
13/30256722 DC : 0	BS ISO 11617 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING
BS ISO 9679:2006	Aerospace. Clamps for fluid systems. Test methods
08/30180841 DC : DRAFT JUNE 2008	BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
02/206403 DC : DRAFT MAY 2002	IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
13/30263194 DC : 0	BS EN 16623 - PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
13/30294291 DC : 0	BS EN 62561-8 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 8: REQUIREMENTS FOR COMPONENTS FOR ISOLATED LPS
BS ISO 15398:2012	Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
BS EN 13245-3:2010	Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
15/30329704 DC : 0	BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
08/30189619 DC : 0	BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
14/30253068 DC : 0	BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
BS ISO 29664 : 2010	PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
BS EN 61753-111-9:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
15/30331165 DC : 0	BS EN 60068-2-5 - ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
08/30166515 DC : DRAFT APR 2008	BS ISO 27448-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SELF-CLEANING PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: MEASUREMENT OF WATER CONTACT ANGLE
BS EN 61753-111-8:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
BS EN 62561-6:2011	Lightning protection system components (LPSC) Requirements for lightning strike counters (LSC)
DIN EN 14836:2006-03	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
BS EN ISO 16474-3:2013	Paints and varnishes. Methods of exposure to laboratory light sources Fluorescent UV lamps
PREN 1790 : DRAFT 2012	ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
09/30181339 DC : DRAFT AUG 2009	BS ISO 22197-3 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 3: REMOVAL OF TOLUENE
BS EN 50341-2-18:2016	Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Sweden (based on EN 50341-1:2012)
BS EN 60099-9:2014	Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations
12/30235298 DC : DRAFT JAN 2012	BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
05/30137845 DC : DRAFT AUG 2005	ISO 12319 - AEROSPACE - CLAMPS 'P' (LOOP STYLE) - PROCUREMENT SPECIFICATION
14/30290405 DC : 0	BS EN 1384 - HELMETS FOR EQUESTRIAN ACTIVITIES
UNE-EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
BS ISO 19810:2017	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
DIN EN 10223-8:2014-04	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
16/30296848 DC : 0	BS ISO 17168-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 1: REMOVAL OF NITRIC OXIDE
PREN 13207 : DRAFT 2016	PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
DD ENV 10169-2:1999	Continuously organic coated (coil coated) steel flat products Products for building exterior applications
DIN EN 124-5:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
BS EN ISO 29664:2017	Plastics. Artificial weathering including acidic deposition
BS EN 60068-2-5:2011	Environmental testing Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing
ASTM G 154 : 2016 : REDLINE	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
BS EN 60684-3-283 : 2011	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION
ISO 15928-3:2015	Houses Description of performance Part 3: Structural durability
EN 62561-3:2017	Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
NF EN 60684-3-283 : 2011 AMD 1 2014	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION
I.S. EN 13245-2:2008	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
I.S. EN 60684-3-283:2011	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION
I.S. EN 60099-8:2011	SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
I.S. EN ISO 16474-3:2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
DIN EN ISO 29664:2016-09 (Draft)	PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN 438-2:2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO/TR 19032:2006	Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
I.S. EN 50526-1:2012	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN ISO 15110:2017	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
ISO 15686-2:2012	Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
I.S. EN 1013:2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 14932:2018	PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES
I.S. EN 60099-4:2014	SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
BS EN 17098-1:2018	Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
I.S. EN 62561-6:2011	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2011, MODIFIED)
BS ISO 27447:2009	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials
BS ISO 22197-2:2011	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of acetaldehyde
CEI EN 61753-111-7 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIA
IEC 62848-1:2016	Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
EN ISO 15110:2017	Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
ISO 16938-2:2008	Building construction Determination of the staining of porous substrates by sealants used in joints Part 2: Test without compression
IEC 62134-1:2009	Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
IEC 62677-2:2017	Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
ISO 22197-1:2016	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 1: Removal of nitric oxide
UNI EN ISO 11403-3 : 2014	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
I.S. EN 13206:2017	PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
DIN EN 966:2013-11	HELMETS FOR AIRBORNE SPORTS
DIN EN ISO 4892-1:2016-10	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN 607:2005-02	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
DIN EN 10223-3:2014-04	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
DIN EN 10223-7:2013-02	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
DIN EN 397:2013-04	Industrial safety helmets (includes Amendment A1:2012)
ISO 4892-1:2016	Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
UNE-EN 10223-8:2014	Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
BS EN 607:2004	Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
IEC 60684-3-283:2010+AMD1:2013 CSV	Flexible insulating sleeving - Part 3: Specifications for individualtypes of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
ISO 11403-3:2014	Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
ISO 16474-3:2013	Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
BS EN 14236:2007	Ultrasonic domestic gas meters
BS EN 10223-7:2012	Steel wire and wire products for fencing and netting Steel wire welded panels for fencing
UNE-EN ISO 11997-2:2014	Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
UNE-EN 10245-3:2012	Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
BS EN ISO 4892-1:2016	Plastics. Methods of exposure to laboratory light sources General guidance
EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
UNE-EN 50526-2:2014	Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
UNE-EN 10223-7:2013	Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
BS EN ISO 11507:2007	Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water
BS EN 12200-1:2016	Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
IEC 60099-9:2014	Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
UNE-EN 1384:2013	Helmets for equestrian activities
ISO 11997-2:2013	Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
UNE-EN 10245-2:2012	Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
IEC 60099-4:2014	Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
IEC 61753-111-9:2009	Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
UNE-EN 1385:2012	Helmets for canoeing and white water sports
IEC 61753-111-8:2009	Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
BS EN 12864 : 2001	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 62852:2015	Connectors for DC-application in photovoltaic systems. Safety requirements and tests
BS EN 10245-1:2011	Steel wire and wire products. Organic coatings on steel wire General rules
ISO 9142:2003	Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
IEC 61753-111-7:2009	Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
UNE-EN 10245-1:2012	Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
UNE-EN 13206:2017	Plastics - Thermoplastic covering films for use in agriculture and horticulture
UNE-EN 1013:2013	Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
UNE-EN ISO 11403-3:2014	Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
ISO 11507:2007	Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
16/30242287 DC : 0	BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION
UNE-EN 12492:2012	Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
UNE-EN ISO 4892-1:2017	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
DIN EN 10245-1:2012-01	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN 4674-003:2017	Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 °C to 200 °C - Product standard
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN 13786:2004+A1:2008	Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
ENV 10169-2 : 1999	CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 1790:2013	Road marking materials - Preformed road markings
EN 1384:2017	Helmets for equestrian activities
EN 16268:2013	Perfomance of reflecting surfaces for luminaires
EN 13785:2005+A1:2008	Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
EN ISO 11997-2:2013	Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
EN 16434:2014	Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices
EN 397:2012+A1:2012	Industrial safety helmets
EN 15619:2014	Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
EN ISO 30013:2011	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN ISO 9142:2003	Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
EN 16314:2013	Gas meters - Additional functionalities
EN 12224:2000	Geotextiles and geotextile-related products - Determination of the resistance to weathering
EN 966:2012+A1:2012	Helmets for airborne sports
EN 3838:2010	Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN ISO 11507:2007	Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
EN 1385:2012	Helmets for canoeing and white water sports
EN 812:2012	Industrial bump caps
I.S. EN 16755:2017	DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD PRODUCTS IN INTERIOR AND EXTERIOR END USE APPLICATIONS
DIN EN 1096-5:2016-06	GLASS IN BUILDING - COATED GLASS - PART 5: TEST METHOD AND CLASSIFICATION FOR THE SELF-CLEANING PERFORMANCES OF COATED GLASS SURFACES
UNE-EN 50526-1:2012	Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
11/30245512 DC : 0	BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS
BS EN 62134-1:2009	Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
CEI EN 61753-111-9 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
UNI EN 14836 : 2006	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
17/30348286 DC : 0	BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
BS EN 3838:2010	Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
04/30123435 DC : DRAFT OCT 2004	IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS
16/30296839 DC : 0	BS ISO 17168-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 2: REMOVAL OF ACETALDEHYDE
UNE-EN 10245-5:2012	Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
UNE-EN 16314:2014	Gas meters - Additional functionalities
UNE-EN 60794-1-22:2015	Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
11/30199655 DC : 0	BS ISO 22197-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 5: REMOVAL OF METHYL MERCAPTAN
17/30335124 DC : 0	BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
CEI EN 60794-1-22 : 2013	OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
UNE-EN 1096-5:2017	Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
BS ISO 16840-6:2015	Wheelchair seating Simulated use and determination of the changes in properties of seat cushions
BS 2782-5:Method 540D:1995	Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance
BS EN ISO 15110:2017	Paints and varnishes. Artificial weathering including acidic deposition
BS EN 62561-3:2017	Lightning protection system components (LPSC) Requirements for isolating spark gaps (ISG)
DIN EN 15619:2014-07	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
DIN EN ISO 16474-3:2014-03	Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
PREN 14836 : DRAFT 2017	SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING
DIN EN 16129:2013-08	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
BS EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
ASTM D 4329 : 2013 : REDLINE	Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
DIN EN 16314:2013-09	GAS METERS - ADDITIONAL FUNCTIONALITIES
17/30351022 DC : 0	BS EN 14836 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING
UNE-EN 62561-4:2011	Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
ISO 19810:2017	Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle
UNE-EN 62561-3:2017	Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
UNE-EN 50289-4-17:2016	Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
11/30233262 DC : 0	BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
07/30127284 DC : 0	BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
BS ISO 22197-5:2013	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of methyl mercaptan
BS EN 61643-11 : 2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
08/30178592 DC : DRAFT FEB 2008	BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
BS ISO 14186:2013	Air cargo. Fire containment covers. Design, performance and testing requirements
PD IEC/TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
UNE-EN 62561-6:2012	Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
15/30326965 DC : 0	BS EN 62561-6 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
UNE-EN 13245-3:2011	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
UNI EN 1013 : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 9370:2017	Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
NF EN 60099-8 : 2011	SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
SAE AS6453	Fire Containment Cover - Design, Performance, and Testing Requirements
PREN 4674-003 : 200P2	AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - INSIDE PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
PREN 71-14 : DRAFT 2017	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
I.S. EN 14836:2006	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
UNI EN 16314 : 2013	GAS METERS - ADDITIONAL FUNCTIONALITIES
S.R. CEN/TS 16599:2014	PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS
IEC 62561-3:2017	Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
UNI EN 16268 : 2013	PERFORMANCE OF REFLECTING SURFACES FOR LUMINARIES
I.S. EN 10245-5:2011	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
I.S. EN 1096-5:2016	GLASS IN BUILDING - COATED GLASS - PART 5: TEST METHOD AND CLASSIFICATION FOR THE SELF-CLEANING PERFORMANCES OF COATED GLASS SURFACES
ISO 4586-2:2015	High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties
I.S. EN 60099-9:2014	SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
UNE-EN 50548:2012	Junction boxes for photovoltaic modules
CEI EN 60099-9 : 2015	SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
I.S. EN 50526-2:2014	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CEI EN 50526-2 : 2014	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CEI EN 62134-1 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 16129:2013	PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
BS EN 60099-4:2014	Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
I.S. EN 60794-1-22:2012	OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS (IEC 60794-1-22:2012 (EQV))
UNE-EN 16268:2016	Perfomance of reflecting surfaces for luminaires
I.S. EN 62561-3:2017	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS (ISG)
ISO 15398:2012	Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
I.S. EN 60684-3-280:2010	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING
I.S. EN 3838:2010	AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES
CEI EN 60099-8 : 2012	SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
PREN 50548 : DRAFT 2009	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
UNE-EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
ISO 15110:2017	Paints and varnishes — Artificial weathering including acidic deposition
ISO 22197-5:2013	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan
ISO 16938-1:2008	Building construction Determination of the staining of porous substrates by sealants used in joints Part 1: Test with compression
ISO 14186:2013	Air cargo — Fire containment covers — Design, performance and testing requirements
ASTM E 3006 : 2015	Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ISO 22197-4:2013	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde
IEC 61643-11:2011	Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC 60092-306:2009	Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
EN 60684-3-280:2010/A1:2014	FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING (IEC 60684-3-280:2010/A1:2013)
DIN EN 12200-1:2016-10	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 30013:2011	Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
BS EN 13199-3:2000	Packaging. Small load carrier systems Bond Stackable System (BSS)
BS EN 10223-3:2013	Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes
ISO 29664:2010	Plastics Artificial weathering including acidic deposition
BS ISO 19281:2016	Air cargo. Fire resistant containers. Design, performance and testing requirements
IEC 60684-3-280:2010+AMD1:2013 CSV	Flexible insulating sleeving - Part 3: Specifications for individualtypes of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving,anti-tracking
BS EN 10245-2:2011	Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN 13523-10:2017	Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation
IEC 62852:2014	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
BS EN 812:2012	Industrial bump caps
EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN 13484:2012	Helmets for users of luges
EN 12200-1:2016	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
DIN EN 71-14:2017-11	SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
EN 12492:2012	Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
DIN ISO 22197-1:2016-04	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007)
CEN/TS 16599:2014	Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
IEC 60794-1-22:2017 RLV	Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
EN 13199-3:2000	Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
DIN EN 10245-2:2012-01	Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
EN 60099-9:2014	Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 1297:2004	Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water
EN 1096-5:2016	Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
EN 62561-6:2011	Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
CEN/TS 15912:2012	Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
EN 50526-1:2012	Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
DIN EN ISO 11403-3:2002-02	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
DIN EN 10245-3:2012-01	Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011
DIN EN 13523-10:2017-05	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
DIN EN ISO 4892-1:2001-09	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
IEC 60099-8:2017 RLV	Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
NBR IEC/TR 62039 : 2010	SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS

ISO 4892-1:2016	Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 11507:2007	Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
ASTM G 154 : 2016 : REDLINE	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ISO 11341:2004	Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation
ISO 4582:2017	Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
AS 3996:2019	Access covers and grates

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Get in touch with us

Shopping Cart

ISO 4892-3:2016

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory