ISO 5348:1998
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Mechanical vibration and shock Mechanical mounting of accelerometers
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-02-2021
Superseded by
Language(s)
English, French
Published date
14-05-1998
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST ISO 5348 : 2002 | Identical |
| GOST R ISO 5348 : 1999 | Identical |
| SS-ISO 5348:1998 | Identical |
| DIN 45664:1963-07 | Similar to |
| AS 2775-2004 | Identical |
| BIS IS 14883 : 2000(R2015) | Identical |
| NEN ISO 5348 : 1998 | Identical |
| BS ISO 5348:1998 | Identical |
| BS 7129:1989 | Identical |
| NBN EN 28662-1 : 1993 | Identical |
| UNI ISO 5348 : 2007 | Identical |
| DIN ISO 5348:1999-07 | Identical |
| BS ISO 16063-22 : 2005 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| 16/30341593 DC : 0 | BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| CEI EN 60068-2-47 : 2006 | ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| 16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
| CSA M5008 : 2003 | AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR |
| BS ISO 14694 : 2003 | FANS FOR GENERAL PURPOSES - PART 7: SPECIFICATIONS FOR BALANCING AND VIBRATION |
| DIN EN ISO 8041-1:2017-10 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
| DIN ISO 10816-7:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS |
| ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted |
| ISO/TR 17243-2:2017 | Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| BS 848-7(2003) : 2003 | FANS FOR GENERAL PURPOSES - PART 7: SPECIFICATIONS FOR BALANCING AND VIBRATION |
| BS ISO 18312-2:2012 | Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Indirect method |
| 17/30368249 DC : 0 | BS ISO 20816-4 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 4: GAS TURBINES IN EXCESS OF 3 MW, WITH FLUID-FILM BEARINGS |
| UNI ISO 10816-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| CSA ISO 5349-2 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE |
| PD ISO/TR 17243-1:2014 | Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min<sup>-1</sup> and 30 000 min<sup>-1</sup> |
| 09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| 16/30319147 DC : 0 | BS ISO 20283-3:2006/AMD 1 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT |
| 09/30191459 DC : 0 | BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS |
| ISO 7626-2:2015 | Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| 11/30131823 DC : DRAFT MAR 2011 | BS ISO 18312-1 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 1: DIRECT METHOD |
| BS 7482-1:1991 | Instrumentation for the measurement of vibration exposure of human beings Specification for general requirements for instrumentation for measuring the vibration applied to human beings |
| DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| 09/30201352 DC : 0 | BS ISO 7626-1 - VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS |
| BS EN 60994:1993 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
| BS EN 15657:2017 | Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
| I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| 04/30115861 DC : DRAFT JUL 2004 | ISO 16063-15 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 15: PRIMARY ANGULAR VIBRATION CALIBRATION BY LASER INTERFEROMETRY |
| ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
| BS ISO 7626-2:2015 | Mechanical vibration and shock. Experimental determination of mechanical mobility Measurements using single-point translation excitation with an attached vibration exciter |
| PD ISO/TR 17243-2:2017 | Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| BS EN 60068-2-47:2005 | Environmental testing Tests. Mounting of specimens for vibration, impact and similar dynamic tests |
| I.S. EN 60068-3-8:2003 | ENVIRONMENTAL TESTING - PART 3-8: SUPPORTING DOCUMENTATION AND GUIDANCE - SELECTING AMONGST VIBRATION TESTS |
| 08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| BS ISO 22867:2004 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| 09/30192810 DC : DRAFT JAN 2009 | BS ISO 10816-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| BS 7676-2:1993 | Acceptance code for gears Determination of mechanical vibrations of gear units during acceptance testing |
| BS ISO 14963:2003 | Mechanical vibration and shock. Guidelines for dynamic tests and investigations on bridges and viaducts |
| 08/30182212 DC : DRAFT SEP 2008 | BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY |
| ISO 21289:2008 | Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data |
| UNI EN 15657-1 : 2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| I.S. EN 15657-1:2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| BS ISO 10816-4 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| ISO 10816-8:2014 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 8: Reciprocating compressor systems |
| UNI ISO 10817-1 : 2011 | ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION |
| DIN ISO 16063-21:2016-08 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-21:2003 + COR. 1:2009 + AMD.1:2016) |
| NF ISO 14694 : 2003 AMD 1 2011 | INDUSTRIAL FANS - SPECIFICATIONS FOR BALANCE QUALITY AND VIBRATION LEVELS |
| ISO 7626-1:2011 | Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications |
| UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
| DKD-R 3-1-1 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN |
| I.S. ENV 12299:1999 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| BS EN ISO 8041:2005 | Human response to vibration. Measuring instrumentation |
| BS EN 1032 : 2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| BS EN ISO 10846-4:2003 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| DIN EN 15433-2:2008-02 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| DIN EN ISO 8041:2006-06 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| EN 1033 : 1995 | HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL |
| EN 60068-2-47:2005 | Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| EN ISO 16251-1:2014 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
| FD CEN ISO/TS 15694 : 2004 FD | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| ISO 20816-2:2017 | Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| 11/30131826 DC : 0 | BS ISO 18312-2 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 2: INDIRECT METHOD |
| ISO 16063-32:2016 | Methods for the calibration of vibration and shock transducers Part 32: Resonance testing Testing the frequency and the phase response of accelerometers by means of shock excitation |
| UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. TS 15694:2004 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| BS ISO 9611:1996 | Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
| FD ISO/TR 230-8 : OCT 2010 FD | TEST CODE FOR MACHINE TOOLS - PART 8: VIBRATION |
| DD ISO/TS 7849-1:2009 | Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement Survey method using a fixed radiation factor |
| BS ISO 10302-2:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
| BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
| 08/30177421 DC : DRAFT AUG 2008 | BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| 06/30153018 DC : 0 | EN 12299 - RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| 14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS ISO 10816-7:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| BS ISO 10815:2016 | Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains |
| BS EN 12299:2009 | Railway applications. Ride comfort for passengers. Measurement and evaluation |
| 05/30064424 DC : DRAFT NOV 2005 | ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD) |
| BS ISO 10326-2:2001 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles |
| DIN ISO 2954:2012-10 | Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012) |
| BS ISO 5008:2002 | Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator |
| DD ENV 28041:1993 | Human response to vibration. Measuring instrumentation |
| BS EN ISO 16251-1:2014 | Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Heavyweight compact floor |
| 01/708612 DC : DRAFT MAY 2001 | BS ISO 14963 - MECHANICAL VIBRATION AND SHOCK - GUIDELINES FOR DYNAMIC TESTS AND INVESTIGATIONS ON BRIDGES AND VIADUCTS |
| BS ISO 16063-15:2006 | Methods for the calibration of vibration and shock transducers Primary angular vibration calibration by laser interferometry |
| BS ISO 20816-1:2016 | Mechanical vibration. Measurement and evaluation of machine vibration General guidelines |
| NFE 90 020 : 2007 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT METHOD AND EVALUATION OF THE RESPONSE OF BUILDING, SENSITIVE EQUIPMENTS AND OCCUPANTS |
| BS ISO 10816-8:2014 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Reciprocating compressor systems |
| NF ISO 5008 : 2002 | AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR |
| 12/30264446 DC : 0 | BS ISO 10816-8 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS |
| AGMA 6000 : REV B : 1996 : R2002 | SPECIFICATION FOR MEASUREMENT OF LINEAR VIBRATION ON GEAR UNITS |
| ANSI S2.47 : 0 | VIBRATION OF BUILDINGS - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATIONS ON THEIR EFFECTS ON BUILDINGS |
| ISO 18312-2:2012 | Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| BS ISO 10816-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| I.S. ENV 25349:1993 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION (ISO 5349:1986) |
| BIS IS/ISO 8568 : 2007 | MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE |
| I.S. EN 60994:1993 | GUIDE FOR FIELD MEASUREMENT OF VIBRATIONS AND PULSATIONS IN HYDRAULIC MACHINES (TURBINES, STORAGE PUMPS AND PUMP-TURBINES) |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer |
| ISO 14963:2003 | Mechanical vibration and shock Guidelines for dynamic tests and investigations on bridges and viaducts |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 14366:2005-02 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| ISO/TS 15694:2004 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system |
| ISO 10846-3:2002 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| BS EN 15433-2:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads Data acquisition and general requirements for measuring equipment |
| ECMA 275 : 3ED 2015 | MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| I.S. EN ISO 22867:2011 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011) |
| I.S. EN 14253:2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 1032:2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| DIN EN 15657-1:2009-10 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| VDI 3832:2013-04 | Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition |
| VDI 3842:2004-06 | Vibrations in piping systems |
| VDI 3838:2004-05 | Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW - Addition to DIN ISO 10816-6 |
| VDI 3836:2012-02 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers - Addition to DIN ISO 10816-3 |
| VDI 3839 Blatt 7:2012-05 | Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps |
| VDI 3839 Blatt 1:2001-03 | Instructions on measuring and interpreting the vibrations of machines - General principles |
| BS 848-6(2003) : 2003 | FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION |
| UNE-ISO/TR 230-8:2012 | Test code for machine tools -- Part 8: Vibrations |
| DKD-R 3-1-3 : 2003 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG |
| BS ISO 13373-7:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| DIN EN 15657:2016-02 (Draft) | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| 16/30334080 DC : 0 | BS ISO 20816-5 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 5: MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMP-STORAGE PLANTS |
| DIN ISO 10816-21:2015-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015) |
| I.S. EN ISO 5349-1:2002 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| BS ISO 8568:2007 | Mechanical shock. Testing machines. Characteristics and performance |
| ISO 20283-3:2006 | Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment |
| I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 13373-7:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| I.S. EN ISO 16251-1:2014 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
| BS ISO 7919-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| 10/30173701 DC : 0 | BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS ISO 20816-2:2017 | Mechanical vibration. Measurement and evaluation of machine vibration Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| DIN ISO 10816-8:2014-11 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014) |
| BS ISO 10816-21:2015 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox |
| BS ISO 18312-1:2012 | Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Direct method |
| 09/30192807 DC : DRAFT FEB 2009 | BS ISO 7919-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| BS ISO 4866:2010 | Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures |
| 14/30265061 DC : 0 | BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX |
| 05/30137514 DC : DRAFT AUG 2005 | IEC 60747-14-4 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS |
| BS ISO 13373-2:2016 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Processing, analysis and presentation of vibration data |
| 06/30065340 DC : DRAFT MAY 2006 | ISO 7849 - ACOUSTICS - DETERMINATION OF AIRBORNE SOUND POWER LEVELS EMITTED BY MACHINERY USING VIBRATION MEASUREMENT - PART 1: SURVEY METHOD USING A FIXED RADIATION FACTOR |
| 02/560743 DC : DRAFT FEB 2002 | BS EN 14366 - LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| UNE-EN ISO 16251-1:2015 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 16/30341489 DC : 0 | BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS |
| BIS IS/ISO 8528-9 : 1995(R2014) | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
| BS EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs General requirements |
| DIN EN ISO 10846-5:2009-07 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| NF EN 12299 : 2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| S.R. CEN/TR 16891:2016 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT METHOD FOR COMBINED ROUGHNESS, TRACK DECAY RATES AND TRANSFER FUNCTIONS |
| ISO 16587:2004 | Mechanical vibration and shock — Performance parameters for condition monitoring of structures |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
| ANSI S12.11-2 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| ISO 5008:2002 | Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator |
| ISO 10326-2:2001 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles |
| ISO 13373-1:2002 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
| I.S. EN 12299:2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
| NF EN 14366 : 2005 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN ISO 5349-1:2001-12 | MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 5349-2:2015-12 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015) |
| DIN EN 1032:2009-02 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| BS EN ISO 5349-1:2001 | Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| ISO 22867:2011 | Forestry and gardening machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles |
| I.S. EN 14366:2005 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| EN 15657:2017 | Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
| UNI EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN ISO 8041 : 2005 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN ISO 5349-1 : 2004 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15433-1 : 2008 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| UNI EN 15433-2 : 2008 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 2: DATA ACQUISITION AND GENERAL REQUIREMENTS FOR MEASURING EQUIPMENT |
| UNI EN 14253 : 2008 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 1032 : 2009 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| UNI ISO 10815 : 2010 | MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION GENERATED INTERNALLY IN RAILWAY TUNNELS BY THE PASSAGE OF TRAINS |
| ISO 16063-15:2006 | Methods for the calibration of vibration and shock transducers Part 15: Primary angular vibration calibration by laser interferometry |
| 03/315162 DC : DRAFT SEP 2003 | ISO 16063-22 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22 - SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| PD ISO/TR 230-8:2010 | Test code for machine tools Vibrations |
| BS EN ISO 10846-5:2009 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| CSA ISO 5349-1 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| ANSI/ASA S2.32 : 1982(R2014) | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION |
| UNI ISO 7919-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| I.S. EN ISO 8041:2005 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| DIN EN 12299:2009-08 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| 16/30337263 DC : 0 | BS ISO 20816-2 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 2: LAND-BASED GAS TURBINES, STEAM TURBINES AND GENERATORS IN EXCESS OF 40 MW, WITH FLUID-FILM BEARINGS |
| BS 6897-5:1995 | Experimental determination of mechanical mobility Measurement using impact excitation with an exciter which is not attached to the structure |
| 07/30161870 DC : 0 | BS EN 15657-1 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
| BS 6955-22:1997 | Calibration of vibration and shock pick-ups Accelerometer resonance testing. General methods |
| BS ISO 13373-1:2002 | Condition monitoring and diagnostics of machines. Vibration condition monitoring General procedures |
| ISO/TR 230-8:2010 | Test code for machine tools Part 8: Vibrations |
| BS EN 60068-3-8:2003 | Environmental testing Supporting documentation and guidance - Selecting amongst vibration tests |
| 09/30190941 DC : DRAFT JAN 2009 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS EN ISO 8041-1:2017 | Human response to vibration. Measuring instrumentation General purpose vibration meters |
| BIS IS 14884 : 2000 AMD 2 2007 | MECHANICAL VIBRATION AND SHOCK - VIBRATION OF BUILDINGS - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATION OF THEIR EFFECTS ON BUILDINGS |
| ABS 0162 : 2014 | GUIDE FOR COMFORT ON YACHTS |
| 04/302070 DC : DRAFT JAN 2004 | BS ISO 13373-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, PRESENTATION AND ANALYSIS OF VIBRATION DATA |
| BS 7854-6(1996) : 1996 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - RECIPROCATING MACHINES WITH POWER RATINGS ABOVE 100 KW |
| 02/707208 DC : DRAFT MAY 2002 | ISO/DIS 8568 - MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE |
| 15/30328956 DC : 0 | BS ISO 20816-1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 1: GENERAL GUIDELINES |
| 16/30341596 DC : 0 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 05/30127567 DC : DRAFT JAN 2005 | ISO 20283-3 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATORY NOISE MEASUREMENT OF SHIPBOARD EQUIPMENT |
| BS 6897-2:1990 | Methods for experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter |
| UNI ISO 10816-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| 07/30171078 DC : DRAFT AUG 2007 | BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| 09/30190938 DC : DRAFT JAN 2009 | BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS ISO 14695:2003 | Industrial fans. Method of measurement of fan vibration |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| 05/30103114 DC : DRAFT NOV 2005 | ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD |
| UNI EN 12299 : 2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| ISO 16063-22:2005 | Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer |
| ISO 13772:2018 | Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance |
| I.S. EN 15657:2017 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| ISO 10816-21:2015 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox |
| I.S. EN ISO 10846-5:2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| IEC 60068-3-8:2003 | Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests |
| ISO/TR 17243-1:2014 | Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 |
| ISO 8568:2007 | Mechanical shock Testing machines Characteristics and performance |
| ISO 10815:2016 | Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
| DIN EN ISO 22867:2012-04 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| I.S. EN 60068-2-47:2005 | ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| ISO 13373-2:2016 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| DIN EN ISO 10846-4:2004-02 | Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003 |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| BS EN 28662-1:1993 | Hand-held portable power tools. Measurement of vibrations at the handle General |
| ISO 16251-1:2014 | Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor |
| BS EN 14253 : 2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| UNE-EN ISO 22867:2012 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| ISO/TS 7849-1:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| BS EN ISO 5349-2 : 2002 | MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE |
| ISO 8041-1:2017 | Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters |
| UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
| BS EN 15433-1:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads General requirements |
| DIN EN 15433-1:2008-02 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements |
| EN 28662-1:1992 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General (ISO 8662-1:1988) |
| EN 15657-1:2009 | Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| EN ISO 10846-3:2002 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002) |
| EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| EN ISO 10846-4:2003 | Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) |
| EN 15433-1:2007 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements |
| UNI EN ISO 22867 : 2012 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES |
| EN ISO 10846-5:2009 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
| EN 15433-2:2007 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment |
| EN ISO/TS 15694 : 2004 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| EN ISO 8041-1:2017 | Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017) |
| DIN ISO 16063-22:2015-04 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-22:2005 + AMD.1:2014) |
| BS EN ISO 10848-1:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Frame document |
| ISO 16063-41:2011 | Methods for the calibration of vibration and shock transducers Part 41: Calibration of laser vibrometers |
| 01/714317 DC : DRAFT OCT 2001 | ISO 18436-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACCREDITATION OF ORGANIZATIONS AND TRAINING AND CERTIFICATION OF PERSONNEL - PART 2: VIBRATION ANALYSIS |
| 08/30190109 DC : DRAFT SEP 2008 | BS ISO 4866 - MECHANICAL VIBRATION AND SHOCK - VIBRATION OF FIXED STRUCTURES - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATION OF THEIR EFFECTS ON STRUCTURES |
| ISO/TR 19201:2013 | Mechanical vibration — Methodology for selecting appropriate machinery vibration standards |
| BS EN 15657-1:2009 | Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| BS ISO 20283-3 : 2006 | MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT |
| 14/30303334 DC : 0 | BS ISO 10816-6:1995/AMD 1 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 6: RECIPROCATING MACHINES WITH POWER RATINGS ABOVE 100 KW |
| 16/30334059 DC : 0 | BS ISO 13373-7 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 7: DIAGNOSTIC TECHNIQUES FOR MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMP-STORAGE PLANTS |
| DIN EN ISO 16251-1:2014-11 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
| BS ISO 10817-1:1999 | Rotating shaft vibration measuring systems Relative and absolute sensing of radial vibration |
| UNI EN ISO 16251-1 : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR |
| 03/311729 DC : DRAFT JULY 2003 | EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| ISO/TR 7849:1987 | Acoustics Estimation of airborne noise emitted by machinery using vibration measurement |
| PD ISO/TR 19201:2013 | Mechanical vibration. Methodology for selecting appropriate machinery vibration standards |
| BS ISO 16063-41:2011 | Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers |
| DIN 45635-8:1985-06 | DETERMINATION OF AIRBORNE NOISE EMITTED BY MACHINES BY, MEASUREMENT OF STRUCTURE BORNE NOISE; BASIC REQUIREMENTS |
| BS ISO 10816-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| 17/30289056 DC : 0 | BS ISO 16063-33 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 33: TESTING OF MAGNETIC FIELD SENSITIVITY |
| BS ISO 7626-1:2011 | Mechanical vibration and shock. Experimental determination of mechanical mobility Basic terms and definitions, and transducer specifications |
| 09/30205267 DC : 0 | BS ISO 22867 - FORESTRY AND GARDEN MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES |
| PD CEN/TR 16891:2016 | Railway applications. Acoustics. Measurement method for combined roughness, track decay rates and transfer functions |
| BS ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria General guidelines |
| BS 6916-8:1988 | Chain saws Method of measurement of hand-transmitted vibration |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| 12/30239340 DC : 0 | BS ISO 16251-1 - ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT FLOOR |
| BS ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| DIN ISO 7919-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| BS ISO 16063-32:2016 | Methods for the calibration of vibration and shock transducers Resonance testing. Testing the frequency and the phase response of accelerometers by means of shock excitation |
| BS ISO 16063-21 : 2003 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| 03/112603 DC : DRAFT AUG 2003 | ISO 13772 - FORESTRY MACHINERY - PORTABLE CHAIN-SAWS - NON-MANUALLY ACTUATED CHAIN BRAKE PERFORMANCE |
| BS ISO 10816-6 : 1995 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 6: RECIPROCATING MACHINES WITH POWER RATINGS ABOVE 100 KW |
| BS ISO 16063-11:1999 | Methods for the calibration of vibration and shock transducers Primary vibration calibration by laser interferometry |
| BS ISO 21289:2008 | Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data |
| 14/30284662 DC : 0 | BS ISO 7626-2 - MECHANICAL VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION WITH AN ATTACHED VIBRATION EXCITER |
| 16/30333609 DC : 0 | BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| CEI EN 60994 : 1996 | GUIDE FOR FIELD MEASUREMENTS OF VIBRATIONS AND PULSATIONS IN HYDRAULIC MACHINES (TURBINES, STORAGE PUMPS AND PUMP TURBINES) |
| 08/30180653 DC : DRAFT APR 2008 | BS ISO 13772 - FORESTRY MACHINERY - PORTABLE CHAIN-SAWS - NON-MANUALLY ACTUATED CHAIN BRAKE PERFORMANCE |
| BS ISO 16587:2004 | Mechanical vibration and shock. Performance parameters for condition monitoring of structures |
| AGMA 6000 : REV B : 1996 | SPECIFICATION FOR MEASUREMENT OF LINEAR VIBRATION ON GEAR UNITS |
| 03/112608 DC : DRAFT AUG 2003 | ISO 22867 - PORTABLE HAND-HELD FORESTRY MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION TEST CODE - MEASUREMENT OF VIBRATION AT THE HANDLES |
| 03/302630 DC : DRAFT FEB 2003 | ISO 16587 - MECHANICAL VIBRATION AND SHOCK - PERFORMANCE PARAMETERS FOR CONDITION MONITORING OF STRUCTURES |
| I.S. EN ISO 8041-1:2017 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
| ABS 0166 : 2014 | GUIDE FOR COMPLIANCE WITH THE ILO MARITIME LABOUR CONVENTION, 2006 - TITLE 3: REQUIREMENTS |
| AGMA 6000 : B | SPECIFICATION FOR MEASUREMENT OF LINEAR VIBRATION ON GEAR UNITS |
| NF EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ANSI S2.32 : 1982 : R2009 | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION |
| ISO 18312-1:2012 | Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 1: Direct method |
| BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| ISO 5347-22:1997 | Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods |
| UNI ISO 7919-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 10816-6:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| BS EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| I.S. EN 50260-1:2002 | SAFETY OF HAND-HELD BATTER-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 4866:2010 | Mechanical vibration and shock Vibration of fixed structures Guidelines for the measurement of vibrations and evaluation of their effects on structures |
| ISO 5349:1986 | Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
| I.S. EN ISO 10848-1:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017) |
| ISO/TS 10811-1:2000 | Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO/TS 7849-2:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor |
| IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| BS EN ISO 10846-3:2002 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| BS EN ISO 22867:2008 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| BS EN 1033:1996 | Hand-arm vibration. Laboratory measurement of vibration at the grip surface of hand-guided machinery. General |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| DIN ISO 10816-6:2015-07 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 6: RECIPROCATING MACHINES WITH POWER RATINGS ABOVE 100 KW (ISO 10816-6:1995 + AMD-1:2015) |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| DIN EN 14253:2008-02 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| DIN EN 15657:2017-10 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
| EN ISO 22867:2011 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1: General requirements |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| EN 12299:2009 | Railway applications - Ride comfort for passengers - Measurement and evaluation |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
| CEN/TR 16891:2016 | Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| DIN ISO 10816-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 60068-3-8:2003 | Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests |
| EN 60994:1992 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
| DKD-R 3-1-2 : 2010 | KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 2: STOSSANREGUNG |
| ISO 5347-14:1993 | Methods for the calibration of vibration and shock pick-ups Part 14: Resonance frequency testing of undamped accelerometers on a steel block |
| ISO 5347-22:1997 | Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods |
| AS 3954:2019 | Motor vehicle driver controls - Adaptive systems for people with disabilities |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 8042:1988 | Shock and vibration measurements Characteristics to be specified for seismic pick-ups |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.