ISO 6336-5:2016
Current
Current
The latest, up-to-date edition.
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
04-08-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 6336-5:2016 describes contact and tooth-root stresses and gives numerical values for both limit stress numbers. It specifies requirements for material quality and heat treatment and comments on their influences on both limit stress numbers.
Values in accordance with ISO 6336-5:2016 are suitable for use with the calculation procedures provided in ISO 63362, ISO 63363 and ISO 63366 and in the application standards for industrial, high-speed and marine gears. They are applicable to the calculation procedures given in ISO 10300 for rating the load capacity of bevel gears. ISO 6336-5:2016 is applicable to all gearing, basic rack profiles, profile dimensions, design, etc., covered by those standards. The results are in good agreement with other methods for the range indicated in the scope of ISO 63361 and ISO 103001.
| DevelopmentNote |
Supersedes ISO/DIS 6336-5. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 6336-5:2016 | Identical |
| NEN ISO 6336-5 : 2016 | Identical |
| NF ISO 6336-5 : 2017 | Identical |
| BS EN 81-43:2009 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 04/102158 DC : 0 | BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES |
| PREN 1564 : DRAFT 2009 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| BS ISO TR 10495:1997 | Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336 |
| 03/314804 DC : DRAFT SEP 2003 | BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
| BS ISO 17804:2005 | Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
| API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| DIN EN 81-43:2010-05 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| 04/30126840 DC : DRAFT DEC 2004 | BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| 11/30229145 DC : 0 | BS ISO 10300-2 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| BS ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Calculation of tooth bending strength |
| 09/30200840 DC : 0 | BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| ISO/TR 10300-30:2017 | Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations |
| CSA B354.5 : 2007 : R2016 | MAST-CLIMBING WORK PLATFORMS |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| B354.12-17 | Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs) |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| NF EN 12158-1 : 2000 + A1 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| AGMA 938 : A | SHOT PEENING OF GEARS |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 03/314803 DC : DRAFT SEP 2003 | ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| 99/702257 DC : DRAFT JAN 1999 | PREN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS AND SERVICE LIFTS - PART 7: RACK AND PINION LIFTS |
| PD ISO/TR 22849:2011 | Design recommendations for bevel gears |
| BS ISO 10972-1:1998 | Cranes. Requirements for mechanisms General |
| ISO/TS 6336-20:2017 | Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method |
| NF ISO/TR 10495 : 98 FD | CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336 |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| ISO 10300-3:2014 | Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| B354.9-17 | Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
| UNI EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 1564:2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| ISO 9084:2000 | Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| BS ISO 10300-2:2014 | Calculation of load capacity of bevel gears Calculation of surface durability (pitting) |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| ISO 23509:2016 | Bevel and hypoid gear geometry |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| BS ISO 23509:2016 | Bevel and hypoid gear geometry |
| API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 11/30229142 DC : 0 | BS ISO 10300-3 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 3: CALCULATION OF TOOTH ROOT STRENGTH |
| BS ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method |
| AGMA 6123 : REV A : 1988 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears — Application to marine gears |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| BS ISO 10300-3:2014 | Calculation of load capacity of bevel gears Calculation of tooth root strength |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| BS ISO 10300-1:2014 | Calculation of load capacity of bevel gears Introduction and general influence factors |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| ISO/TR 22849:2011 | Design recommendations for bevel gears |
| ISO/TR 10495:1997 | Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336 |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| DIN EN 1564:2012-01 | Founding - Ausferritic spheroidal graphite cast irons |
| ISO 17804:2005 | Founding Ausferritic spheroidal graphite cast irons Classification |
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNE-EN 1564:2012 | Founding - Ausferritic spheroidal graphite cast irons |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 1564 : 2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 12158-2 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| AGMA 6123 : REV A : 2006 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| BS ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting) |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| 09/30183113 DC : 0 | BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 11/30229148 DC : 0 | BS ISO 10300-1 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 1: INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 | MAST-CLIMBING WORK PLATFORMS |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors |
| CSA B354.5:2007 | MAST-CLIMBING WORK PLATFORMS |
| AGMA 6123 : REV A : 1988 : R2000 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 1564:2011 | Founding. Ausferritic spheroidal graphite cast irons |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears — Application for industrial gears |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| 04/30126837 DC : DRAFT DEC 2004 | BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| I.S. EN 81-43:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| PD ISO/TR 10300-30:2017 | Calculation of load capacity of bevel gears ISO rating system for bevel and hypoid gears. Sample calculations |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| 03/118501 DC : DRAFT NOV 2003 | ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
| ISO 10300-2:2014 | Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) |
| EN 16719:2018 | Transport platforms |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| ONORM EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| ISO 2639:2002 | Steels Determination and verification of the depth of carburized and hardened cases |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| SAE J2441_201506 | Shot Peening |
| ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| SAE AMS 2432 : 2013 | SHOT PEENING, COMPUTER MONITORED |
| SAE AMS2430T | Shot Peening, Automatic |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| SAE AMS2432D | Shot Peening, Computer Monitored |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| ISO 683-2:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering |
| ISO 12107:2012 | Metallic materials — Fatigue testing — Statistical planning and analysis of data |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| ISO 3754:1976 | Steel — Determination of effective depth of hardening after flame or induction hardening |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.