API 6A : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
30-04-2021
Published date
01-01-2010
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
API Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Design and performance - General requirements
5 Materials - General requirements
6 Welding - General requirements
7 Quality control
8 Equipment marking
9 Storing and shipping
10 Equipment-specific requirements
11 Repair and remanufacture
Annex A (informative) - Purchasing guidelines
Annex B (informative) - USC unit tables and data for this
International Standard
Annex C (informative) - Method of calculating stud bolt
lengths for type 6B and 6BX flanges
Annex D (informative) - Recommended flange bolt torque
Annex E (informative) - Recommended weld preparation
design dimensions
Annex F (informative) - Design validation procedures
Annex G (informative) - Design and rating of equipment
for use at elevated temperatures
Annex H (normative) - Design and manufacture of surface
wellhead running, retrieving and tools, clean-out
tools and wear bushings
Annex I (normative) - Design validation procedures for
surface safety valves and underwater valves
Annex J (normative) - Repair and remanufacture
requirements
Annex K (informative) - Recommended specifications
for top connectors for christmas trees
Annex L (normative) - Specifications for valve-removal
preparations, valve-removal plugs and handling
tools
Annex M (informative) - Qualification of heat-treating
equipment
Annex N (informative) - List of tables and list of figures
Annex O (normative) - API Regional Annex
Annex P (informative) - Use of the API Monogram by
Licensees and Test Agency Licensing
Bibliography
Describes requirements and recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
| DevelopmentNote |
Also numbered as ISO 10423. (10/2010) Also available in Chinese edition, see API 6A CHINESE. (03/2011) 'ERRATA 10 2016' incorporates 'ERRATA 9 2016', 'ERRATA 8 2016', 'ERRATA 7 2014', 'ERRATA 6 2014', 'ERRATA 5 2013', 'ERRATA 4 2013', 'ERRATA 3 2013', 'ERRATA 2 2011' & 'ERRATA 1 2011'. (08/2016) Also available in Russian translation, see API 6A RUSSIAN. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
549
|
| ProductNote |
NEW CHILD ERR 9 IS ADDED NEW CHILD ERR 8 2010 IS NOW ADDED NEW CHILD ADD 2 2012 IS NOW ADDED NEW CHILD ADD 1 2011 IS NOW ADDED
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API WIRELINE OPERATIONS & PROCEDURES : 1994 | WIRELINE OPERATIONS AND PROCEDURES - BOOK 5 OF THE VOCATIONAL TRAINING SERIES |
| API 6AV2 : 2014 | INSTALLATION, MAINTENANCE, AND REPAIR OF SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES OFFSHORE |
| API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| EI SAND EROSION & EROSION-CORROSION : 2017 | GUIDELINES ON SAND EROSION AND EROSION-CORROSION MANAGEMENT |
| 14/30304346 DC : 0 | BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| 08/30193157 DC : 0 | BS EN ISO 13628-1:2005/AMD 2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 04/30091601 DC : 0 | ISO 13628-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11 - FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| NORSOK D 007:2013 | WELL TESTING SYSTEM |
| API 1111 REDLINE : 2009 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| API 6FB: 1998 | SPECIFICATION FOR FIRE TEST FOR END CONNECTIONS |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| API RP 59 : 2006 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 5C6 : 2006 : R2012 | PIPE WITH WELDED CONNECTORS |
| I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| CSA Z341 SERIES : 2014 | STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS |
| CEN ISO/TS 16530-2:2015 | Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| DEFSTAN 47-18(PT1)/1(1978) : 1978 AMD 1 | EQUIPMENT FOR RECEIPT AND DELIVERY OF LIQUID FUELS - PART 1: BULK TRANSPORTATION AND TRANSFER |
| API RP 14B : 2015 | DESIGN, INSTALLATION, OPERATION, TEST, AND REDRESS OF SUBSURFACE SAFETY VALVE SYSTEMS |
| API 5C6 RUSSIAN : 2012 | WELDING CONNECTIONS TO PIPE |
| API 59 : 2006 : R2012 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| API 49 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| 16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
| API 11IW : 2000 | RECOMMENDED PRACTICE FOR INDEPENDENT WELLHEAD EQUIPMENT |
| API 6A718 REDLINE : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| API MPM CH20.3 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW |
| API 6ACRA : 2015 : INC : ADD 1 : 2017 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| UNI EN ISO 13628-15 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
| API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| BS 2464:1954 | Specification for hose couplings for petrol, oil and lubricants (¾ in. to 4 in. nominal sizes) |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
| API 5C6 CHINESE : 2006 | WELDING CONNECTIONS TO PIPE |
| BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
| API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API 5C7:1996 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
| API 6HT : 2013 | HEAT TREATMENT AND TESTING OF CARBON AND LOW ALLOY STEEL LARGE CROSS SECTION AND CRITICAL SECTION COMPONENTS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 6G : 3ED 82 | RECOMMENDED PRACTICE ON THROUGH FLOWLINE (TFL) PUMP DOWN SYSTEMS |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| NORSOK D 001 : REV 3 COR 2013 | DRILLING FACILITIES |
| ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
| NORSOK D 010 : 2013 | WELL INTEGRITY IN DRILLING AND WELL OPERATIONS |
| API MPMS CHAPTER 20.3 : 2013(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| BS ISO 13628-6:2000 | Petroleum and natural gas industries. Design and operation of subsea production systems Design and operation of subsea controls |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| BS PD8010-1(2015) : 2015 | PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| API RP 1171 : 2015 | FUNCTIONAL INTEGRITY OF NATURAL GAS STORAGE IN DEPLETED HYDROCARBON RESERVOIRS AND AQUIFER RESERVOIRS |
| API SPEC 12K : 2008 | SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS |
| API RP 1170 : 2015 | DESIGN AND OPERATION OF SOLUTION-MINED SALT CAVERNS USED FOR NATURAL GAS STORAGE |
| API 6FB : 1998 : R2006 | SPECIFICATION FOR FIRE TEST FOR END CONNECTIONS |
| API RP 17W : 2014 | RECOMMENDED PRACTICE FOR SUBSEA CAPPING STACKS |
| API 5C6 : 2006 | PIPE WITH WELDED CONNECTORS |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 09/30172965 DC : 0 | BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
| API 49 : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| BS 6759-3:1984 | Safety valves Specification for safety valves for process fluids |
| BS 2464-2:1969 | Specification for hose couplings for petrol, oil and lubricants High pressure couplings |
| API 64 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DIVERTER SYSTEMS EQUIPMENT AND OPERATIONS |
| API RP 17N : 2017 | RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
| AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
| API 6A718 RUSSIAN : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM A 1099/A1099M : 2017 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| 04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| API HF3 : 2011 | PRACTICES FOR MITIGATING SURFACE IMPACTS ASSOCIATED WITH HYDRAULIC FRACTURING |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| NORSOK D-002 : 2013 | WELL INTERVENTION EQUIPMENT |
| API 6ACRA : 2015 : ERR 1 : 2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| API 59 RUSSIAN : 2006 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| API TR 17TR11 : 2015 | PRESSURE EFFECTS ON SUBSEA HARDWARE DURING FLOWLINE PRESSURE TESTING IN DEEP WATER |
| API 20B : 2013 | OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| S.R. CEN ISO/TS 16530-2:2015 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| I.S. EN ISO 13628-11:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage Geological storage |
| API 551 : 2016 | PROCESS MEASUREMENT |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
| API 14D : 1994 | SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| UNI EN ISO 13628-11 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| API 16R : 1997 : R2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| API TR 17TR12 : 2015 | CONSIDERATION OF EXTERNAL PRESSURE IN THE DESIGN AND PRESSURE RATING OF SUBSEA EQUIPMENT |
| API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| API 49 : 2001 : R2013 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 6A718 : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| API RP 1114 : 2013 | RECOMMENDED PRACTICE FOR THE DESIGN OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES |
| API 16R RUSSIAN : 2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| DIN CEN ISO/TS 16530-2;DIN SPEC 91087:2016-05 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| API 6AV1 : 2013 | SPECIFICATION FOR VALIDATION OF WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| BS 1782:1951 | Specification for couplings for suction and delivery hose (1½ in. to 8 in. nominal sizes) other than fire hose couplings |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| CSA Z341 SERIES-14 PACKAGE : 2014 | CONSISTS OF Z341 SERIES-14, STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS AND Z341.4-14, SALT CAVERN WASTE DISPOSAL |
| API TR 6MET : 2010 | METALLIC MATERIAL LIMITS FOR WELLHEAD EQUIPMENT USED IN HIGH TEMPERATURE FOR API 6A AND 17D APPLICATIONS |
| API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| API 17V : 2015 | RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS |
| 07/30173429 DC : 0 | BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API TR 17TR7 : 2017 | VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API 92M : 2017 | MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE |
| API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| API 11IW : 2000 : R2008 | RECOMMENDED PRACTICE FOR INDEPENDENT WELLHEAD EQUIPMENT |
| API 49 RUSSIAN : 2001 : R2007 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API RP 17S : 2015 | RECOMMENDED PRACTICE FOR THE DESIGN, TESTING, AND OPERATION OF SUBSEA MULTIPHASE FLOW METERS |
| API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| API 6FB : 1998 : R2011 | SPECIFICATION FOR FIRE TEST FOR END CONNECTIONS |
| API 20C CHINESE : 2009 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API 100-2 : 2015 | MANAGING ENVIRONMENTAL ASPECTS ASSOCIATED WITH EXPLORATION AND PRODUCTION OPERATIONS INCLUDING HYDRAULIC FRACTURING |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| API 5B : 2017 | THREADING, GAUGING, AND INSPECTION OF CASING, TUBING, AND LINE PIPE THREADS |
| API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
| ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
| BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
| API 5C7 : 1996 : R2007 | RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
| ABS 0243 : 2017 | GUIDANCE NOTES ON SUBSEA HYBRID RISER SYSTEMS |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| API 16ST : 2009 : R2014 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| NACE 1C187 : 2005 | USE OF GALVANIC PROBE CORROSION MONITORS IN OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API RP 17R : 2015 | RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS |
| API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
| API 6X : 2014 | DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT |
| PD CEN ISO/TS 16530-2:2015 | Well integrity Well integrity for the operational phase |
| API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
| API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 6AF : 2008 | TECHNICAL REPORT ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| BS ISO 13628-11:2007 | Petroleum and natural gas industries. Design and operation of subsea production systems Flexible pipe systems for subsea and marine applications |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| API 17B REDLINE : 2008 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| API STD 6ACRA:2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| API 16ST:2009 | COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| API 17L2 : 2013 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| API 16R:1997 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| API TR 6F2 : 1999 | TECHNICAL REPORT ON FIRE RESISTANCE IMPROVEMENTS FOR API FLANGES |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
| API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
| API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| ISO 13628-11:2007 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| API SPEC 11D1:2021+ADD1:2022 | Packers and Bridge Plugs |
| ASME B16.20 : 2017 | METALLIC GASKETS FOR PIPE FLANGES |
| API RP 17L2:2021 | Recommended Practice for Ancillary Equipment for Flexible Pipes and Subsea Umbilicals |
| API SPEC 19LH:2019 | Liner Hanger Equipment |
| API RP 19GLHB:2020+ADD 1:2023 | Gas Lift Handbook |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| API 5CT : 2012 | CASING AND TUBING |
| API TR 6AF2 : 2013 | TECHNICAL REPORT ON CAPABILITIES OF API INTEGRAL FLANGES UNDER COMBINATION OF LOADING - PHASE 2 |
| API TR 6AF1 : 1998 | TECHNICAL REPORT ON TEMPERATURE DERATING ON API FLANGES UNDER COMBINATION OF LOADING |
| ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME PV CODE 2 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| API 6A718 : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| SAE AMS 2750 : 2012 | PYROMETRY |
| API 14D : 1994 | SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
| API 7 : 2001 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
| ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| ISO 10424-1:2004 | Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| API 6AF : 2008 | TECHNICAL REPORT ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD |
| API 6AV1 : 2013 | SPECIFICATION FOR VALIDATION OF WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO 10414-1:2008 | Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.