AS/NZS 4871.1:2012
Current
The latest, up-to-date edition.
Electrical equipment for mines and quarries General requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-12-2012
Sets out general requirements for the design, construction and testing of electrical equipment intended for mining and quarrying activities and covers any plant intended to be relocated from time to time in association with mining activities. This includes the types of equipment covered in AS/NZS4871, Parts 2 to 6. These requirements are in addition to those in AS60204.1 and AS60204.11, which cover electrical safety of machinery. This Standard does not apply to handheld equipment.
Committee |
EL-023
|
DocumentType |
Standard
|
ISBN |
978 1 74342 316 5
|
Pages |
62
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out the general requirements for the design, construction and testing of electrical equipment directly associated with mining and quarrying activities, and covers any plant intended to be relocated. This includes the types of equipment covered in AS/NZS 4871, Parts 2 to 6. These requirements are in addition to those in AS 60204.1 and AS 60204.11, which cover electrical safety of machinery. This Standard does not apply to handheld equipment.NOTES: 1 For permanently fixed equipment and installations, such as equipment in offices or amenities and fixed processing plant, reference should be made to AS/NZS 3000, AS 3007 and AS 2067.2 The requirements of this Standard should be read in conjunction with, but do not take precedence over, regulations of a regulatory authority that may apply in a specific area.
Originated in Australia as part of AS 1039-1972, AS 1740-1975, AS 2595.1-1983 and AS 2989-1987.
Originated in New Zealand as AS/NZS 4781.1:2002.
Previous edition 2010.
Third edition 2012.
Reissued incorporating Amendment No. 1 (April 2014).
AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
AS 62061-2006 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
AS/NZS 3008.1.2:2010 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
AS 61508.0-2006 | Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and AS 61508 (Reconfirmed 2015) |
AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
AS/NZS 4240.2:2009 | Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021) |
AS/NZS 61000.1.1:2000 | Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016) |
AS/NZS 61000.6.1:2006 | Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
AS 60044.2-2007 | Instrument transformers Inductive voltage transformers (IEC 60044-2:Ed.1.2 (2003) MOD) |
AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
AS 60270-2001 | High-voltage test techniques - Partial discharge measurements (Reconfirmed 2015) |
AS/NZS 61000.2.12:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013) |
AS/NZS 61000.3.4:2007 | Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018) |
AS/NZS 61000.3.5:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
AS/NZS 61000.2.2:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013) |
AS/NZS 4871.4:2010 | Electrical equipment for mines and quarries Mains powered electrical mobile machines |
AS/NZS 61000.4.30:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods |
AS/NZS 61000.4.13:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
AS 61508.4-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Definitions and abbreviations (Reconfirmed 2023) |
AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
AS 3007.5-2004 | Electrical installations - Surface mines and associated processing plant - Operating requirements |
AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
AS 61508 Supp1-2012 | Functional safety of electrical/electronic/programmable electronic safety-related systems, Supplement 1: Commented version (Supplement to AS 61508 series) (Reconfirmed 2023) |
AS 61508.6-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 (Reconfirmed 2023) |
AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
AS 2380.1-1989 | Electrical equipment for explosive atmospheres - Explosion-protection techniques General requirements (Reconfirmed 2013) |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 2380.4-1994 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Pressurized rooms or pressurized enclosures (Reconfirmed 2013) |
AS/NZS 61000.4.27:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
AS/NZS 61000.4.2:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test |
AS/NZS 2290.1:2005 | Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas |
AS 3007.1-2004 | Electrical installations - Surface mines and associated processing plant - Scope and definitions |
AS/NZS 61000.4.3:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
AS/NZS 61000.4.15:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Functional and design specifications |
AS 61508.5-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Examples of methods for the determination of safety integrity levels (Reconfirmed 2023) |
AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
AS 60076.1-2005 | Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD) |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS/NZS 60479.1:2010 | Effects of current on human beings and livestock General aspects |
AS/NZS 61000.2.5:1999 | Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016) |
AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
AS/NZS 61000.4.16:2002 | |
AS/NZS 61000.4.11:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016) |
AS/NZS 1972:2006 | Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
AS/NZS 61000.4.4:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrical fast transient/burst immunity test |
AS/NZS 61000.6.3:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
AS 61508.1-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems General requirements (Reconfirmed 2023) |
AS 61800.3-2005 | Adjustable speed electrical power drive systems EMC requirements and specific test methods (Reconfirmed 2016) |
AS 61508.2-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Requirements for electrical/electronic/programmable electronic safety-related systems (Reconfirmed 2023) |
AS/NZS 61000.4.7:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023) |
AS 60044.1-2007 | Instrument transformers Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD) (Reconfirmed 2016) |
AS 61508.3-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements (Reconfirmed 2023) |
AS 3007.4-2004 | Electrical installations - Surface mines and associated processing plant - Additional requirements for specific applications |
AS 3007.3-2004 | Electrical installations - Surface mines and associated processing plant General requirements for equipment and ancillaries |
AS/NZS 60079.11:2011 | Explosive atmospheres Equipment protection by intrinsic safety ‘i’ (Reconfirmed 2022) |
AS 3007.2-2004 | Electrical installations - Surface mines and associated processing plant - General protection requirements |
AS 60204.11-2006 | Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
AS/NZS 61000.2.4:2009 | Electromagnetic compatibility (EMC) Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances (Reconfirmed 2020) |
AS/NZS 4761.1:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards |
AS/NZS 61000.3.12:2006 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase |
AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
AS/NZS 61000.3.2:2007 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) |
AS/NZS 4871.6:2007 | Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
AS/NZS 60079.0:2012 | Explosive atmospheres Equipment - General requirements |
AS 2660-1991 | Hose and hose assemblies - Air/water - For underground coal mines |
AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS 61508.7-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Overview of techniques and measures (Reconfirmed 2023) |
AS 60076.11-2006 | Power transformers Dry-type transformers (Reconfirmed 2016) |
AS/NZS 61000.4.8:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test (Reconfirmed 2023) |
AS/NZS 61000.6.4:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
AS/NZS 4871.5:2010 | Electrical equipment for mines and quarries Battery powered electrical mobile machines |
AS/NZS 61000.4.6:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
AS 62271.200-2005 | High-voltage switchgear and controlgear A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200, Ed. 1 (2003) MOD) |
AS/NZS 61000.2.3:1999 | Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016) |
AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
AS/NZS 60112:2003 | |
AS/NZS 4761.2:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency |
AS/NZS 61000.4.34:2012 | Electromagnetic compatibility (EMC) Testing and measurements techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (Reconfirmed 2023) |
AS/NZS 61000.3.11:2002 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013) |
AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
AS/NZS 61000.3.3:2012 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS/NZS 4871.2:2010 | Electrical equipment for mines and quarries Distribution, control and auxiliary equipment |
AS/NZS 61000.4.14:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
AS/NZS 3100:2009 | |
AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
AS/NZS 2290.1:2014 | Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas |
AS/NZS 3785.8:2016 | Underground mining - Shaft equipment Conveyances for inclined shafts |
AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.