![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 1729 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
28-06-2022
English
05-02-2016
CONTAINED IN VOL. 06.01, 2017 Defines the equipment and procedures for visual appraisal of the colors and color differences of opaque materials that are diffusely illuminated.
Committee |
E 12
|
DocumentType |
Redline
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This practice specifies the equipment and procedures for visual appraisal of the colors and color differences of opaque materials that are diffusely illuminated. These specifications are of critical importance in color matching. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 Hue Test as specified in Guide E1499.
1.2Critical visual appraisal of colors and color differences of materials such as metallic and pearlescent paints requires illumination that is nearly a geometric simulation of direct sunlight, because such directional illumination permits observation of the sparkle (glitter) and goniochromatism that characterize such materials. Such viewing conditions are beyond the scope of this practice.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 5531 : 2017 : REDLINE | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 4587 : 2011 : REDLINE | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
A-A-50557 Base Document:1996 | PRIMER, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, FOR METAL SURFACES |
FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
A-A-3161 Base Document:1998 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
BS ISO 11037:2011 | Sensory analysis. Guidelines for sensory assessment of the colour of products |
TAPPI T 515 : 2014 | VISUAL GRADING AND COLOR MATCHING OF PAPER |
MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
DIN EN ISO 105-A11:2013-01 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES (ISO 105-A11:2012) |
A-A-52561 Revision B:2004 | INK, PRINTING: LITHOGRAPHIC OFFSET, WITH DRIER |
TT-P-1952 Revision F:2015 | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
TT-E-505 Revision B:1985 | ENAMEL, (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) |
MIL-C-52032 Revision D:1995 | COATING, INTERIOR, FUEL RESISTANT, VOC COMPLIANT FOR GASOLINE CONTAINERS |
A-A-3121 Revision A:2004 | PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
A-A-3120 Base Document:1997 | PAINT: FOR SWIMMING POOLS |
MIL-PRF-71182 Base Document:2006 | CARTRIDGE, 25 MM: ARMOR PIERCING FIN STABILIZED DISCARDING SABOT WITH TRACE (APFSDS-T), M919 |
ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
MIL-P-28578 Revision B:1988 | PAINT, WATER REDUCIBLE, SEMI-GLOSS EXTERIOR AND INTERIOR |
MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
09/30196489 DC : 0 | BS ISO 105-A11 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
MIL-DTL-11414 Revision F:2013 | Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
A-A-3164 Revision A:2007 | SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT |
MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
MIL-PRF-71140 Revision A:2006 | Cartridge, 25MM: Target Practice with Trace (TP-T), M793 |
TT-P-24 Revision E:1985 | PAINT, OIL (EXTERIOR CONCRETE AND MASONRY |
MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
MIL-PRF-4556 Revision F:1998 | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
ASTM D 6762 : 2002 : REV A | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
TT-C-00542 Revision F:1995 | COATING, POLYURETHANE, OIL-FREE, MOISTURE CURING |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
ASTM E 1808 : 1996 : R2009 | Standard Guide for Designing and Conducting Visual Experiments |
ASTM D 7489 : 2009 : R2013 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM D 5382 : 2002 : R2007 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 5382 : 2002 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 4674 : 2002 : REV A | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM E 1360 : 2005 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
ASTM D 6762 : 2002 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
ASTM D 3322 : 1982 : R2001 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM F 940:1999 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
ASTM D 7489 : 2009 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM D 6762 : 2002 : REV A : R2017 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
ASTM D 706 : 2015 : REDLINE | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM E 1541 : 1998 : R2003 | Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007) |
ASTM D 5343 : 2006 : R2012 : EDT 1 | Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners |
ASTM D 3424 : 2011 : REDLINE | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
UNE-ISO 11037:2013 | Sensory analysis. Guidelines for sensory assessment of the colour of products. |
MIL-DTL-7788 Revision H:2011 | PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
ASTM E 1478 : 1997 : R2015 | Standard Practice for Visual Color Evaluation of Transparent Sheet Materials (Withdrawn 2022) |
ASTM F 29 : 1997 : R2012 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
ASTM D 344 : 2011 : R2016 | Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018) |
TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
TT-P-29 Revision K:1991 | PAINT, LATEX |
MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
BS EN ISO 105-A11:2012 | Textiles. Tests for colour fastness Determination of colour fastness grades by digital imaging techniques |
ASTM F 1946 : 2004 | Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
09/30196799 DC : 0 | BS ISO 11037 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR SENSORY ASSESSMENT OF THE COLOUR OF PRODUCTS |
TAPPI T 1212 : 2007 | LIGHT SOURCES FOR EVALUATING PAPERS INCLUDING THOSE CONTAINING FLUORESCENT WHITENING AGENTS |
MIL-C-24782 Base Document:1993 | COATING, POWDERED FLUORPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS |
MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
TT-P-1565 Revision B:1978 | PAINT, BOOT TOPPING BLACK |
TT C 2114 : 0 | COATING, OBLITERATING |
ASTM F 1945 : 2005 | Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting |
MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
ASTM D 4674 : 2002 | Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight |
ASTM D 1562 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
TAPPI T 1212 : 2007 : R2012 | LIGHT SOURCES FOR EVALUATING PAPERS INCLUDING THOSE CONTAINING FLUORESCENT WHITENING AGENTS |
DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
ASTM D 3322 : 1982 : R1996 : EDT 1 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
SAE J 361 : 2017 | PROCEDURE FOR VISUAL EVALUATION OF INTERIOR AND EXTERIOR AUTOMOTIVE TRIM |
MIL-PRF-81352 Revision C:2005 | COATINGS, AIRCRAFT TOUCH-UP |
SAE AMS 3143 : 2016 | POWDER COATING MATERIAL |
ASTM D 344 : 2011 | Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
UNE-EN ISO 105-A11:2013 | Textiles - Tests for colour fastness - Part A11: Determination of colour fasness grades by digital imaging techniques (ISO 105-A11:2012) |
SAE J 2633 : 2015 | WHEEL AND WHEEL TRIM WEATHERING TESTING FOR PAINT COATINGS |
ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM E 1808 : 1996 : R2015 | Standard Guide for Designing and Conducting Visual Experiments |
ASTM C 1520 : 2002 : R2010 | Standard Guide for Paintability of Latex Sealants |
ASTM D 6762 : 2002 : REV A : R2009 : EDT 1 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
ASTM E 1360 : 2005 : R2015 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
ASTM D 3322 : 1982 : R2011 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM E 1360 : 2005 : R2010 | Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System |
ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM D 4302 : 2014 : REDLINE | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
ASTM F 940 : 1999 : R2009 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 3322 : 1982 : R2005 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM F 934 : 1996 : R2017 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM D 2960 : 2005 | Standard Guide for Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances (Withdrawn 2013) |
ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
ASTM D 3134 : 2015 : REDLINE | Standard Practice for Establishing Color and Gloss Tolerances |
MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
ASTM F 934 : 1996 : R2013 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM F 1945 : 2005 : R2011 | Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting (Withdrawn 2020) |
ASTM D 5343 : 2006 | Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners |
ASTM F 934 : 1996 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
ASTM D 707 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
MIL C 24712 : A | COATINGS, POWDER (METRIC) |
ASTM D 4265 : 2014 : REDLINE | Standard Guide for Evaluating Stain Removal Performance in Home Laundering |
A-A-3165 Revision A:2007 | LACQUER, GLOSS, FOR AIRCRAFT USE |
MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
ISO 11037:2011 | Sensory analysis — Guidelines for sensory assessment of the colour of products |
ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
ASTM D 5382 : 2002 : R2017 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM E 1478 : 1997 | Standard Practice for Visual Color Evaluation of Transparent Sheet Materials |
ASTM D 387 : 2000 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
ASTM F 934 : 1996 : R2008 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
ASTM E 1808 : 1996 : R2003 | Standard Guide for Designing and Conducting Visual Experiments |
ASTM D 6762 : 2002 : EDT 1 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
ASTM F 29 : 1997 : R2017 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
ASTM F 29 : 1997 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
ASTM D 7489 : 2009 : R2017 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
AASHTO M 181 : 2010 : R2015 | SPECIFICATION FOR CHAIN-LINK FENCE |
MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
ASTM E 1808 : 1996 | Standard Guide for Designing and Conducting Visual Experiments |
MIL-DTL-32000 Base Document:2003 | Paint, Face, Camouflage |
MIL-PRF-52747 Revision F:1996 | NOZZLE ASSEMBLY, CLOSED-CIRCUIT REFUELING, STANDARD AND ARCTIC SERVICE |
TT P 002118 : LATEST | PAINT, TREE MARKING |
TT-C-542 Revision E:1978 | COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING |
TT-E-545 Revision C:1986 | PRIMER (ENAMEL - UNDERCOAT, ALKYD, ODORLESS, INTERIOR, FLAT, TINTS & WHITE) |
A-A-2867 Base Document:1995 | COATING, POLYURETHANE, SINGLE COMPONENT MOISTURE CURE, ALIPHATIC |
MIL-PRF-14105 Revision E:2011 | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
ASTM F 2366 : 2012 : REDLINE | Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus |
TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
TT-C-1060 Revision B:1980 | COATING COMPOUND, REFLECTIVE |
ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 16 : 2016 : REDLINE | TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
SAE AMSSTD595A:2017 | COLORS USED IN GOVERNMENT PROCUREMENT |
I.S. EN ISO 105-A11:2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
ASTM C 1520 : 2002 | Standard Guide for Paintability of Latex Sealants |
ASTM F 29 : 1997 : R2009 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
ASTM F 934 : 1996 : R2003 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
ASTM D 5343 : 2006 : R2012 | Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners |
ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
GOST 849:2018 | Primary nickel. SpecificationsE |
ISO 105-A11:2012 | Textiles — Tests for colour fastness — Part A11: Determination of colour fastness grades by digital imaging techniques |
ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
ASTM E 2136 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability |
EN ISO 105-A11:2012 | Textiles - Tests for colour fastness - Part A11: Determination of colour fastness grades by digital imaging techniques (ISO 105-A11:2012) |
ASTM D 2336 : 1999 | Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
ASTM F 940 : 1999 : R2005 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
A-A-3183 Base Document:2000 | PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
AASHTO M 181 :2010 | SPECIFICATION FOR CHAIN-LINK FENCE |
MIL-PRF-81904 Revision C:2011 | COATING COMPOUND, THERMAL-INSULATION |
ASTM E 1478 : 1997 : R2003 | Standard Practice for Visual Color Evaluation of Transparent Sheet Materials |
CGSB-11.5 : M87 | HARDBOARD, PRECOATED, FACTORY FINISHED, FOR EXTERIOR CLADDING |
MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
MIL-P-28577 Revision B:1988 | PRIMER, WATER REDUCIBLE, CORROSION RESISTANT, FOR METAL SURFACES |
ASTM C 1520 : 2002 : R2015 : EDT 1 | Standard Guide for Paintability of Latex Sealants |
ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
ASTM D 6695 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
TT-E-001384 Base Document:1979 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
ASTM D 2454 : 2014-03 | PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
UNI EN ISO 105-A11 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
ASTM E 1499 : 2016 : REDLINE | Standard Guide for Selection, Evaluation, and Training of Observers |
ASTM D 387 : 2000 : R2017 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023) |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM E 1541 : 1998 | Standard Practice for Specifying and Matching Color Using the Colorcurve System |
ASTM D 4674 : 2002 : REV A : R2010 | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments (Withdrawn 2019) |
ASTM F 29 : 1997 : R2002 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 5382 : 2002 : R2013 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 2205 : 2015 : REDLINE | Standard Guide for Selection of Tests for Traffic Paints |
ASTM D 7270 : 2007 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM D 387 : 2000 : R2008 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
ASTM D 5343 : 2006 : R2018 | Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners |
ASTM E 1478 : 1997 : R2009 | Standard Practice for Visual Color Evaluation of Transparent Sheet Materials |
ASTM D 1641 : 2004 | Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |
ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
ASTM E 1499 : 2016 : REDLINE | Standard Guide for Selection, Evaluation, and Training of Observers |
ISO 3664:2009 | Graphic technology and photography Viewing conditions |
ISO/CIE 10526:1999 | CIE standard illuminants for colorimetry |
ASTM D 5531 : 2017 : REDLINE | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.