EN 12828:2012+A1:2014
Current
Current
The latest, up-to-date edition.
Heating systems in buildings - Design for water-based heating systems
Published date
02-04-2014
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 System design requirements
5 Instructions for operation, maintenance and use
6 Installation and commissioning
Annex A (informative) - Control system classification
Annex B (informative) - Thermal Environment
Annex C (informative) - Thermal insulation
Annex D (informative) - Guidance for dimensioning diaphragm
expansion vessels and pressurisation systems
(sealed systems)
Annex E (informative) - Safety valves for heating systems
Annex F (informative) - A-deviations
Bibliography
This European Standard specifies design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105 °C. In case of heating systems with maximum operating temperatures over 105 °C other safety aspects than those described in 4.6 may apply. The other clauses of this European Standard are still valid for those systems.This European Standard does not amend product standards or product installation requirements. This standard covers the design of:-heat supply systems;-heat distribution systems;-heat emission systems;-control systems.This European Standard takes into account heating requirements of attached systems (e.g. domestic hot water, process heat, air conditioning, ventilation) in the design of a heat supply, but does not cover the design of these systems.This European Standard does not cover requirements for installation or commissioning or instructions for operation, maintenance and use of water based heating systems.This European Standard does not cover the design of fuel and energy supply systems.
| Committee |
CEN/TC 228
|
| DevelopmentNote |
2012 Edition Re-Issued in April 2014 & incorporates AMD 1 2014. (04/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 12828:2003 | Identical |
| SN EN 12828 : 2012 + A1 2014 | Identical |
| I.S. EN 12828:2012+A1:2014 | Identical |
| DIN EN 12828:2014-07 | Identical |
| NF EN 12828 : 2013 + A1 2014 | Identical |
| UNI EN 12828 : 2014 | Identical |
| I.S. EN 12828:2012 | Identical |
| NS EN 12828 : 2012 + A1 2014 | Identical |
| BS EN 12828 : 2012 | Identical |
| NEN EN 12828 : 2012 + A1 2014 | Identical |
| PN EN 12828 : 2013 + A1 2014 | Identical |
| NBN EN 12828 : 2013 + A1 2014 | Identical |
| UNE-EN 12828+A1:2014 | Identical |
| DIN EN 12828:2003-06 | Identical |
| BS EN 12828:2012+A1:2014 | Identical |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| UNI EN 12977-4 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| UNI CEN/TS 12977-4 : 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DIN EN 15316-2:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5 |
| 05/30140625 DC : 0 | EN 15377-2 - HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| DIN EN 12977-1:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| I.S. EN 15377-1:2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| UNI EN 15377-2 : 2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| I.S. EN 15316-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5 |
| S.R. CEN TS 12977-1:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| CEN/TS 12977-4:2010 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 11/30247846 DC : 0 | BS EN 12977-4 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| I.S. EN 12977-4:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DD CEN/TS 12977-1:2010 | Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS EN 15316-2:2017 | Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space emission systems (heating and cooling), Module M3-5, M4-5 |
| S.R. CEN/TR 15316-6-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 6-2: EXPLANATION AND JUSTIFICATION OF EN 15316-2, MODULE M3-5, M4-5 |
| UNI EN 15377-1 : 2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| 05/30137882 DC : 0 | EN 15316-1 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 1: GENERAL |
| BS EN 12977-4:2012 | Thermal solar systems and components. Custom built systems Performance test methods for solar combistores |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| DIN EN 14336:2005-01 | Heating systems in buildings - Installation and commissioning of water based heating systems; German version EN 14336:2004 |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 15316-2-1:2007-10 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS |
| VDI 2067 Blatt 1:2012-09 | Economic efficiency of building installations - Fundamentals and economic calculation |
| VDI 2073-1 : 2014 COR 1 2014 | HYDRAULIC SYSTEMS IN BUILDING SERVICES - HYDRAULIC CIRCUITS |
| VDI 3811:2016-07 | Refurbishment of heating installations |
| VDI 3809 Blatt 1:2011-09 | Acceptance of building installations - Heating |
| VDI 3891:2015-07 | Emission control - Human cremation facilities |
| VDI 4708 Blatt 1:2012-07 | Pressure maintenance, venting, deaeration - Pressure maintenance |
| VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
| VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
| VDI 3805 Blatt 2:2016-01 | Product data exchange in the building services - Heating value assemblies |
| VDI 6002 Blatt 1:2014-03 | Solar heating for potable water - Basic principles - System technology and application in residential buildings |
| 10/30196052 DC : 0 | BS ISO 11855-2 - BUILDING ENVIRONMENT DESIGN - DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| BS EN 12977-3:2012 | Thermal solar systems and components. Custom built systems Performance test methods for solar water heater stores |
| BS EN 12977-1:2012 | Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems |
| I.S. EN 15459:2007 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| I.S. EN ISO 11855-2:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY (ISO 11855-2:2012) |
| I.S. EN 15316-2-1:2007 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| PD CEN/TR 15316-6-2:2017 | Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Explanation and justification of EN 15316-2, Module M3-5, M4-5 |
| 11/30247855 DC : 0 | BS EN 12977-3 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| BS EN ISO 11855-2:2015 | Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Determination of the design heating and cooling capacity |
| 05/30140976 DC : 0 | EN 15316-2-1 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS |
| UNI CEN/TS 12977-1 : 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| 05/30140986 DC : 0 | EN 15316-4-2 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS |
| ISO 23045:2008 | Building environment design — Guidelines to assess energy efficiency of new buildings |
| CEN/TR 15316-6-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 |
| EN 12977-1:2018 | Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems |
| UNE-EN 12977-3:2012 | Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| UNI EN 15459 : 2008 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| 14/30309947 DC : 0 | BS EN 15316-2 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING) |
| BS EN 15377-2:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems Design, dimensioning and installation |
| 06/30156096 DC : 0 | ISO CEN TS 12977-3 - PERFORMANCE TEST METHODS - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| DD CEN/TS 12977-4 : DRAFT MAY 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DD ENV 12977-3:2001 | Thermal solar systems and components. Custom built systems Performance characterisation of stores for solar heating systems |
| DIN EN 15459-1:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS - PART 1: CALCULATION PROCEDURES, MODULE M1-14 |
| UNE-EN 12977-4:2012 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| DIN EN 12977-3:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| I.S. EN 15377-2:2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| EN 12977-4:2018 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| PREN 12977-3 : DRAFT 2011 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| EN 12977-3:2018 | Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores |
| EN ISO 11855-2:2015 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012) |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| ISO 11855-2:2012 | Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 2: Determination of the design heating and cooling capacity |
| EN 15377-2:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 15459-1:2017 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| EN 15316-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 |
| EN 15459:2007 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings |
| EN 15377-1:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity |
| EN 15450:2007 | Heating systems in buildings - Design of heat pump heating systems |
| EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
| DIN EN 12977-4:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DD ENV 12977-1:2001 | Thermal solar systems and components. Custom built systems General requirements |
| BS EN 15459-1:2017 | Energy performance of buildings. Economic evaluation procedure for energy systems in buildings Calculation procedures, Module M1-14 |
| I.S. EN 15459-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS - PART 1: CALCULATION PROCEDURES, MODULE M1-14 |
| BS EN 15316-2-1:2007 | Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating emission systems |
| I.S. EN 12977-3:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| I.S. EN 12977-1:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| S.R. CEN TS 12977-4:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| UNI EN 12977-1 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| UNE-EN ISO 11855-2:2016 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012) |
| UNI EN 12977-3 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
| BS EN 15459:2007 | Energy performance of buildings. Economic evaluation procedure for energy systems in buildings |
| BS EN 15450:2007 | Heating systems in buildings. Design of heat pump heating systems |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 15459:2008-06 | ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS |
| CEN/TS 12977-1:2010 | Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems |
| DIN EN 12977-1:2012-06 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| DIN EN 15377-1:2009-02 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| DIN EN 15377-2:2008-11 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| DIN EN 15450:2007-12 | Heating systems in buildings - Design of heat pump heating systems |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| EN 442-3:2003 | Radiators and convectors - Part 3: Evaluation of conformity |
| BS EN 12170:2002 | Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator |
| BS EN ISO 21003-2 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
| EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| EN 1503-4:2016 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| EN 12953-6:2011 | Shell Boilers - Part 6: Requirements for equipment for the boiler |
| BS EN 12171:2002 | Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator |
| EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
| BS 6880-2:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
| BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
| BS EN 60335-2-73 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| ISO 15927-5:2004 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
| BS 7074-1:1989 | Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems Code of practice for domestic heating and hot water supply |
| BS 6880-1:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| BS 1566-1(2002) : 2002 | COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| BS 3198:1981 | Specification for copper hot water storage combination units for domestic purposes |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 12241:2008 | Thermal insulation for building equipment and industrial installations Calculation rules |
| EN 12170:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| BS 5449:1990 | Specification for forced circulation hot water central heating systems for domestic premises |
| EN ISO 12241:2008 | Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| BS 7206:1990 | Specification for unvented hot water storage units and packages |
| EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| EN 442-2:2014 | Radiators and convectors - Part 2: Test methods and rating |
| EN 1264-1:2011 | Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
| BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
| EN 12171:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 6880-3:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Installation, commissioning and maintenance |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.