EN 13886:2005+A1:2010
Current
The latest, up-to-date edition.
Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
17-03-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and description
4 List of significant hazards
5 Safety and hygiene requirements and/or measures
6 Verification of safety and hygiene requirements and/or
measures
7 Information for use
Annex A (normative) - Noise test code for cooking kettles
(Grade 2)
Annex B (normative) - Principles of design to ensure the
cleanability of cooking kettles
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
1.1This document specifies the safety and hygiene requirements for the design and manufacture of cooking kettles equipped with powered stirrer and/or mixer taking account of installation, operation, cleaning, removal of jammed food, feeding, maintenance and changing the tools.The cooking kettles equipped with powered stirrer and/or mixer are used from catering to small scale-food industry to cook, cool and mix all cold or hot food. They permit addition of ingredients during processing without stopping the machine.NOTEThe kettle bowl can be fixed or equipped with a manually or power operated tilting mechanism.In the text that follows, the term "cooking kettles" is used to refer to the equipment covered by this document.This document covers cooking kettles equipped with powered stirrer and/or mixer having technical performances in accordance with the following:-thermal energy supply can be electricity, gas (see EN 125 and EN 161), steam or heat-conducting fluid;-capacity of the kettle: from 30 l to 600 l (nominal volume);-maximum power rating 80 kW;-speed of the powered stirrer: 10 rpm to 200 rpm;-maximum speed of the mixer: 3 000 rpm.The machines covered by this document are not intended to be cleaned with a high pressure water jet.This European Standard deals with all significant hazards, hazardous situations and events relevant to cooking kettles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).1.2This document does not apply to:-domestic machines (i.e. capacity of kettles less than 30 l);-planetary mixers which are covered by EN 454;-food processors which are covered by EN 12852;-cooking kettles without powered stirrer and/or mixer having a manual tilting kettle.1.3This document does not deal with hazard due to the pressure on machines with a double jacket.NOTEDepending on the pressure and the volume of the double jacket, the cookin
Committee |
CEN/TC 153
|
DevelopmentNote |
2005 Edition Re-issued in March 2010 & incorporates AMD 1 2010. (04/2010) Supersedes UNE EN 13886. (03/2011)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN 13886 : 2005 + A1 2010 | Identical |
UNI EN 13886 : 2010 | Identical |
SN EN 13886+A1:2010 | Identical |
BS EN 13886 : 2005 | Identical |
PN EN 13886 : 2007 + A1 2010 | Identical |
UNE-EN 13886:2006 | Identical |
I.S. EN 13886:2005 | Identical |
DIN EN 13886:2011-02 | Identical |
UNE-EN 13886:2005+A1:2010 | Identical |
NBN EN 13886 : 2005 + A1 2010 | Identical |
NS EN 13886 : 2005 + A1 2010 | Identical |
NF EN 13886 : 2005 + A1 2010 | Identical |
BS EN 13886:2005+A1:2010 | Identical |
PNE-EN 13886:2006+A1 | Identical |
BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
I.S. EN 203-2-3:2014 | GAS HEATED CATERING EQUIPMENT - PART 2-3: SPECIFIC REQUIREMENTS - BOILING PANS |
DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
PREN 203-2-3 : DRAFT 2013 | GAS HEATED CATERING EQUIPMENT - PART 2-3: SPECIFIC REQUIREMENTS - BOILING PANS |
UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
EN 203-2-3:2014 | Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans |
EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
EN 203-2-11:2006 | Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers |
I.S. EN 203-2-11:2006 | GAS HEATED CATERING EQUIPMENT - PART 2-11: SPECIFIC REQUIREMENTS - PASTA COOKERS |
13/30279670 DC : 0 | BS EN 203-2-3 - GAS HEATED CATERING EQUIPMENT - PART 2-3: SPECIFIC REQUIREMENTS - BOILING PANS |
UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
DIN EN 203-2-3:2015-04 | GAS HEATED CATERING EQUIPMENT - PART 2-3: SPECIFIC REQUIREMENTS - BOILING PANS |
BS EN 203-2-3:2014 | Gas heated catering equipment Specific requirements. Boiling pans |
BS EN 203-2-11:2006 | Gas heated catering equipment Specific requirements - Pasta cookers |
DIN EN 203-2-11:2006-09 | Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.