EN 61169-1:2013/AC:2016-02
Current
Current
The latest, up-to-date edition.
RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
Published date
19-02-2016
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Units, symbols and dimensions
5 Standards ratings and characteristics
6 Classifications into climatic categories
7 IEC type designation
8 Testing
9 Test methods
10 Quality assessment
11 Marking
Annex A (informative) - Simulated sea-water solution for use
with salt mist test (marine environment)
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding
European publications
Pertains to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment.
| Committee |
SR 46F
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 61169-1:2013 | Identical |
| I.S. EN 61169-1:2013 | Identical |
| NBN EN 61169-1 : 2014 COR 2016 | Identical |
| BS EN 61169-1:2013 | Identical |
| DIN EN 61169-1-1:1998-02 | Identical |
| NF EN 61169-1 : 2016 | Identical |
| DIN EN 61169-1 : 2014 | Identical |
| VDE 0887-969-1 : 2014 | Identical |
| PN EN 61169-1 : 2013 AC 2016 | Identical |
| NEN EN IEC 61169-1 : 2013 C1 2016 | Identical |
| IEC 61169-1:2013/COR1:2016 | Identical |
| I.S. EN 61169-1:2013/AC:2016-02 | Equivalent |
| NEN 11169-1 : 1994 AMD 2 1997 | Identical |
| BS EN 61169-44:2013 | Radio-frequency connectors Sectional specification for series SMP push-on radio-frequency coaxial connectors |
| I.S. EN 61169-19:2011 | RADIO-FREQUENCY CONNECTORS - PART 19: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMB |
| BS EN 61169-51:2015 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock. Characteristic impedance 50 O (type QLI) |
| BS EN 61169-35:2011 | Radio-frequency connectors Sectional specification for 2,92 series RF connectors |
| I.S. EN 61169-47:2015 | RADIO-FREQUENCY CONNECTORS - PART 47: SECTIONAL SPECIFICATION FOR RADIO-FREQUENCY COAXIAL CONNECTORS WITH CLAMP COUPLING, TYPICALLY FOR USE IN 75 OHMS CABLE NETWORKS (TYPE F-QUICK) |
| BS EN 61169-11:2017 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling. Characteristic impedance 50 Ω (Type 4,1-9,5) |
| BS EN 61169-39:2011 | Radio-frequency connectors Sectional specification for CQM series quick lock RF connectors |
| BS EN 61169-42:2013 | Radio-frequency connectors Sectional specification for CQN series quick lock RF coaxial connectors |
| BS EN 61169-59:2017 | Radio-frequency connectors Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors |
| BS EN 61169-8:2007 | Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC) |
| I.S. EN 61169-51:2015 | RADIO-FREQUENCY CONNECTORS - PART 51: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 13,5 MM WITH BAYONET LOCK - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE QLI) |
| I.S. EN 61169-37:2007 | RADIO-FREQUENCY CONNECTORS - PART 37: SECTIONAL SPECIFICATION FOR STWX8 R.F CONNECTORS |
| I.S. EN 61169-11:2017 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) |
| I.S. EN 61169-2:2007 | RADIO-FREQUENCY CONNECTORS - PART 2: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE 9,52 |
| CEI EN 61169-52 : 2016 | RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 61169-52:2015 | Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors |
| EN 61169-14:2010 | Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) |
| EN 61169-50:2015 | Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) |
| EN 61169-38:2009 | Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type TMA) - 50 Ω applications |
| EN 61169-49:2014 | Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors |
| EN 61169-18:2011 | Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA |
| EN 61169-41:2011 | Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors |
| EN 61169-26:2013 | Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors |
| EN 61169-19:2011 | Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB |
| EN 61169-42:2013 | Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors |
| EN 61169-53:2016 | Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ohm (Type S7-16) |
| EN 61169-2:2007 | Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| BS EN 61169-47:2015 | Radio-frequency connectors Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) |
| BS EN 61169-48:2015 | Radio-frequency connectors Sectional specification for series BMP R.F. coaxial connectors |
| BS EN 61169-54:2016 | Radio-frequency connectors Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10 |
| I.S. EN 61169-39:2011 | RADIO-FREQUENCY CONNECTORS - PART 39: SECTIONAL SPECIFICATION FOR CQM SERIES QUICK LOCK RF CONNECTORS |
| BS EN 61169-32:2000 | Radio-frequency connectors RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85) |
| BS EN 61169-24:2009 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| BS EN 61169-31:2000 | Radio-frequency connectors RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0) |
| I.S. EN 61169-52:2015 | RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS |
| BS EN 61169-50:2015 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system. Characteristic impedance 50 Ohm (type QMA) |
| BS EN 61169-19:2011 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type SSMB |
| CEI EN 61169-59 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS -PART 59: SECTIONAL SPECIFICATION FOR TYPE L32-4 AND L32-5 THREADED MULTI-PIN RADIO-FREQUENCY CONNECTORS |
| I.S. EN 61169-35:2011 | RADIO-FREQUENCY CONNECTORS - PART 35: SECTIONAL SPECIFICATION FOR 2,92 SERIES RF CONNECTORS |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| I.S. EN 61169-40:2011 | RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS |
| BS EN 61169-16:2007 | Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N) |
| I.S. EN 61169-50:2015 | RADIO-FREQUENCY CONNECTORS - PART 50: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 4,11 MM WITH QUICK LOCK SYSTEM - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE QMA) |
| BS EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks |
| BS EN 61169-29:2005 | Radio-frequency connectors Sectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characterisctic impedance 50 ohms (type 1,0/2,3). 50 ohms and 75 ohms applications |
| EN 61169-11:2017 | Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 Ω (type 4,1-9,5) |
| BS EN 50290-4-1:2014 | Communication cables General considerations for the use of cables. Environmental conditions and safety aspects |
| I.S. EN 61169-44:2013 | RADIO-FREQUENCY CONNECTORS - PART 44: SECTIONAL SPECIFICATION FOR SERIES SMP PUSH-ON RADIO-FREQUENCY COAXIAL CONNECTORS (IEC 61169-44:2012 (EQV)) |
| I.S. EN 61169-41:2011 | RADIO-FREQUENCY CONNECTORS - PART 41: SECTIONAL SPECIFICATION FOR CQA SERIES QUICK LOCK R.F. COAXIAL CONNECTORS |
| I.S. EN 61169-18:2011 | RADIO-FREQUENCY CONNECTORS - PART 18: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMA |
| I.S. EN 61169-36:1999 | RADIO-FREQUENCY CONNECTORS - PART 36: MICROMINIATURE R.F. COAXIAL CONNECTORS WITH SNAP-ON COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE MCX) |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| I.S. EN 61169-14:2010 | RADIO-FREQUENCY CONNECTORS - PART 14: R.F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 12 MM WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 3,5/12) |
| DIN EN 61169-11 : 2018-01 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) (IEC 61169-11:2017) |
| VDE 0887-969-11 : 2018-01 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) (IEC 61169-11:2017) |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| I.S. EN 50290-4-1:2014 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| EN 61169-51:2015 | Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ohm (type QLI) |
| I.S. EN 61169-48:2015 | RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR SERIES BMP R.F. COAXIAL CONNECTORS |
| BS EN 61169-49:2014 | Radio-frequency connectors Sectional specification for SMAA series R.F connectors |
| BS EN 61169-37:2007 | Radio-frequency connectors Sectional specification for STWX8 R.F connectors |
| BS EN 61169-41:2011 | Radio-frequency connectors Sectional specification for CQA series quick lock R.F. coaxial connectors |
| BS EN 61169-18:2011 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type SSMA |
| I.S. EN 61169-29:2005 | RADIO-FREQUENCY CONNECTORS - PART 29: SECTIONAL SPECIFICATION - MINIATURE RADIO FREQUENCY COAXIAL CONNECTORS MODEL SCREW, SNAP-ON, PUSH-PULL OR QUICK-LOCK, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 1,0/2,3) - 50 OHMS AND 75 OHMS APPLICATIONS |
| I.S. EN 61169-42:2013 | RADIO-FREQUENCY CONNECTORS - PART 42: SECTIONAL SPECIFICATION FOR CQN SERIES QUICK LOCK RF COAXIAL CONNECTORS (IEC 61169-42:2013 (EQV)) |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| BS EN 61169-45:2014 | Radio-frequency connectors Sectional specification for series SQMA series quick lock RF coaxial connectors |
| BS EN 61169-40:2011 | Radio-frequency connectors Sectional specification for 2.4 series RF connectors |
| BS EN 61169-38:2009 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors model, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type TMA). 50 ohms applications |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61169-53:2016 | RADIO-FREQUENCY CONNECTORS - PART 53: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 16 MM WITH SCREW LOCK - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE S7-16) |
| I.S. EN 61169-58:2016 | RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE SBMA) |
| I.S. EN 61169-49:2014 | RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS |
| I.S. EN 61169-45:2014 | RADIO-FREQUENCY CONNECTORS -PART 45: SECTIONAL SPECIFICATION FOR SERIES SQMA SERIES QUICK LOCK RF COAXIAL CONNECTORS |
| I.S. EN 61169-26:2013 | RADIO-FREQUENCY CONNECTORS - PART 26: SECTIONAL SPECIFICATION FOR TNCA SERIES RF COAXIAL CONNECTORS (IEC 61169-26:2013 (EQV)) |
| I.S. EN 61169-16:2007 | RADIO-FREQUENCY CONNECTORS - PART 16: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 7 MM (0,276 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (75 OHMS) (TYPE N) |
| EN 61169-59:2017 | Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors |
| CEI EN 61169-11 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) |
| I.S. EN 61169-38:2009 | RADIO-FREQUENCY CONNECTORS - PART 38: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS MODEL, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE TMA) - 50 OHMS APPLICATIONS |
| EN 61169-54:2016 | Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10 |
| EN 61169-36:1997 | Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 ohm (type MCX) |
| I.S. EN 61169-54:2016 | RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OHMS, SERIES 4,3-10 |
| I.S. EN 61169-59:2017 | RADIO-FREQUENCY CONNECTORS - PART 59: SECTIONAL SPECIFICATION FOR TYPE L32-4 AND L32-5 THREADED MULTI-PIN RADIO-FREQUENCY CONNECTORS |
| BS EN 61169-26:2013 | Radio-frequency connectors Sectional specification for TNCA series RF coaxial connectors |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60728-4 : 2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| BS EN 61169-36:1997 | Radio-frequency connectors Microminiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX) |
| CEI EN 61169-58 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE SBMA) |
| BS EN 61169-43:2013 | Radio-frequency connectors Sectional specification for RBMA series blind mating RF coaxial connectors |
| BS EN 61169-58:2016 | Radio-frequency connectors Sectional specification for RF coaxial connectors with blind-mate coupling. Characteristic impedance 50 Ω (type SBMA) |
| BS EN 61169-14:2010 | Radio-frequency connectors R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12) |
| BS EN 61169-52:2015 | Radio-frequency connectors Sectional specification for series MMCX RF coaxial connectors |
| BS EN 61169-2:2007 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type 9,52 |
| BS EN 61169-53:2016 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock. Characteristic impedance 50 O (Type S7-16) |
| I.S. EN 61169-43:2013 | RADIO-FREQUENCY CONNECTORS - PART 43: SECTIONAL SPECIFICATION FOR RBMA SERIES BLIND MATING RF COAXIAL CONNECTORS (IEC 61169-43:2013 (EQV)) |
| I.S. EN 61169-8:2007 | RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC) |
| I.S. EN 60728-4:2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| CEI EN 61169-54 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OHMS, SERIES 4,3-10 |
| BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| EN 61169-39:2011 | Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors |
| EN 61169-44:2013 | Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors |
| EN 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| EN 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) |
| EN 61169-29:2005 | Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs and 75 ohms applications |
| EN 50290-4-1:2014 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| EN 61169-16:2007 | Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N) |
| EN 61169-35:2011 | Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors |
| EN 61169-45:2014 | Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors |
| EN 61169-47:2015 | Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) |
| EN 61169-37:2007 | Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors |
| EN 61169-48:2015 | Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors |
| EN 61169-43:2013 | Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors |
| EN 61169-58:2016/AC:2017-09 | Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA) |
| EN 61169-40:2011 | Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors |
| UNE-EN 50290-4-1:2016 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| HD 351.1 : 200S1 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - GENERAL REQUIREMENTS AND MEASURING METHODS |
| EN 61726:2015 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
| IEC 60457-1:1974 | Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| ISO 2859:1974 | Sampling procedures and tables for inspection by attributes |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60096-2:1961 | Radio-frequency cables - Part 2: Relevant cable specifications |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| ISO 2859-0:1995 | Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| IEC 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| ISO 286-1:2010 | Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-61:1991 | Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence |
| ISO 2015:1976 | Numbering of weeks |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| ISO 129-1:2004 | Technical drawings — Indication of dimensions and tolerances — Part 1: General principles |
| EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-13:1999 | Environmental testing - Part 2: Tests - Test M: Low air pressure |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN 60068-2-61:1993 | Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| EN 60068-2-11:1999 | Environmental testing - Part 2: Tests - Test Ka: Salt mist |
| EN 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| IEC 61726:2015 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.