I.S. EN ISO/IEC 80079-38:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
Hardcopy , PDF
29-01-2020
16-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Requirements for equipment (machines)
and components
5 Additional requirements for specific equipment and
components
6 Fire protection
7 Information for use
8 Marking
Annex A (informative) - Example of an ignition
hazard assessment for a conveyor belt
intended for use in a coal mine
Annex B (informative) - Example of an ignition hazard
assessment for a shearer loader intended for use
in a potentially explosive atmosphere of a coal mine
Annex C (normative) - Ignition sources
Annex D (informative) - Guidance on potential risks
for converter-fed motors
Annex E (normative) - Tests for surface protective
coating for group I hand tools of EPL Mb
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2014/34/EU
Annex ZB (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Annex ZC (informative) - Significant technical changes
between this document and the previous
edition of this European Standard
Defines the explosion protection requirements for the design, construction, assessment and information for use (maintenance, repair, marking) of equipment that may be an individual item or form an assembly.
| Committee |
TC 305
|
| DevelopmentNote |
Supersedes I.S. EN 1710. (02/2017)
|
| DocumentType |
Standard
|
| ISBN |
978-2-8322-3180-7
|
| Pages |
132
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO/IEC 80079-38:2016 | Identical |
| EN ISO/IEC 80079-38:2016 | Identical |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| ISO 2592:2000 | Determination of flash and fire points Cleveland open cup method |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 14973:2015 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| ISO 4589-2:1996 | Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| IEC 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 340:2013 | Conveyor belts Laboratory scale flammability characteristics Requirements and test method |
| AS/NZS 3584.2:2008 | Diesel engine systems for underground coal mines Explosion protected |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 14916:2017 | Thermal spraying — Determination of tensile adhesive strength |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| IEC TS 60034-25:2014 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| ISO 80079-37:2016 | Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 1554:2012 | Conveyor belts - Drum friction testing |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 8421-1:1987 | Fire protection — Vocabulary — Part 1: General terms and phenomena of fire |
| ISO 2878:2017 | Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance |
| IEC 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| CFR 30(PTS1-199) : JUL 2017 | MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR |
| IEC 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
| EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 2878:2011 | Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance |
| EN 1552:2003 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| ISO 630-5:2014 | Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| ISO/TS 15029-2:2012 | Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
| ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| ISO 15029-1:1999 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method |
| AS/NZS 3584.3:2012 | Diesel engine systems for underground coal mines Maintenance |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| IEC 60079-18:2014 | Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.