IEC 62282-3-1:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
16-02-2012
English - French, Spanish, Castilian
24-04-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and protective measures
4.1 General safety strategy
4.2 Physical environment and operating conditions
4.3 Selection of materials
4.4 General requirements
4.5 Pressure equipment and piping
4.6 Protection against fire or explosion hazards
4.7 Electrical safety
4.8 Electromagnetic compatibility (EMC)
4.9 Control systems and protective components
4.10 Pneumatic and hydraulic powered equipment
4.11 Valves
4.12 Rotating equipment
4.13 Cabinets
4.14 Thermal insulating materials
4.15 Utilities
4.16 Installation and maintenance
5 Type tests
5.1 General requirements
5.2 Test fuels
5.3 Basic test arrangements
5.4 Leakage tests
5.5 Strength tests
5.6 Normal operation type test
5.7 Electrical overload test
5.8 Dielectric requirements and simulated abnormal
conditions
5.9 Shutdown parameters
5.10 Burner operating characteristics tests
5.11 Automatic control of burners and catalytic
oxidation reactors
5.12 Exhaust gas temperature test
5.13 Surface and component temperatures
5.14 Wind tests
5.15 Rain test
5.16 CO emissions
5.17 Leakage tests (repeat)
6 Routine tests
7 Marking, labelling and packaging
7.1 General requirements
7.2 Fuel cell power system marking
7.3 Marking of components
7.4 Technical documentation
Annex A (informative) Significant hazards, hazardous
situations and events dealt with in
this standard
Annex B (informative) Carburization and material compatibility
for hydrogen service
Annex C (normative) Test wall
Annex D (normative) Vent test wall
Annex E (normative) Piezo ring and details of typical
construction
Applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. Is a product safety standard suitable for conformity assessment.
| DocumentType |
Standard
|
| Pages |
156
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 62282-3-1 : 2007 | Identical |
| NEN EN IEC 62282-3-1 : 2007 | Identical |
| I.S. EN 62282-3-1:2007 | Identical |
| PN EN 62282-3-1 : 2008 | Identical |
| VDE 0130-301 : 2008 | Identical |
| BS EN 62282-3-1:2007 | Identical |
| UNE-EN 62282-3-1:2011 | Identical |
| CEI EN 62282-3-1 : 2008 | Identical |
| EN 62282-3-1 : 2007 | Identical |
| EN 62282-3-3:2008 | Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation |
| NF EN 62282-3-3 : 2008 | FUEL CELL TECHNOLOGIES - PART 3-3: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| I.S. EN 62282-3-3:2008 | FUEL CELL TECHNOLOGIES - PART 3-3: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| IEC 62282-3-3:2007 | Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation |
| BS EN 62282-3-3:2008 | Fuel cell technologies Stationary fuel cell power systems. Installation |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| IEC 61779-6:1999 | Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO/TS 16528:2002 | Boilers and pressure vessels Registration of Codes and Standards to promote international recognition |
| IEC TR 60079-16:1990 | Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses |
| IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| ISO 5388:1981 | Stationary air compressors Safety rules and code of practice |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 14847:1999 | Rotary positive displacement pumps Technical requirements |
| IEC 61779-4:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| ISO 14121:1999 | Safety of machinery Principles of risk assessment |
| IEC TS 61000-3-4:1998 | Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| IEC 62086-1:2001 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| IEC 60300-3-9:1995 | Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| ISO/IEC Guide 7:1994 | Guidelines for drafting of standards suitable for use for conformity assessment |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.