IEEE C37.13-2015 REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
Hardcopy , PDF
20-12-2024
English
30-12-2015
1 Overview
2 Normative references
3 Definitions
4 Service conditions
5 Ratings
6 Functional components
7 Temperature limitations and classification
of insulating materials
8 Test procedures
Annex A (informative) - Application guide
Annex B (informative) - Bibliography
This standard covers the following types and preferred ratings for enclosed low-voltage ac power circuit breakers: a) Stationary or drawout type of two-, three-, or four-pole construction with one or more rated maximum voltages of 1058 V, 730 V, 635 V (600 V for units incorporating fuses), 508 V, or 254 V for application on systems having nominal voltages of 1000 V, 690 V, 600 V, 480 V, or 240 V respectively b) Unfused or fused type c) Manually operated or power operated, with or without a trip system d) Fused drawout assemblies consisting of current-limiting fuses in a drawout assembly intended to be connected in series with a low-voltage ac power circuit b...
Committee |
Switchgear
|
DevelopmentNote |
Supersedes IEEE C37.13A. (02/2016)
|
DocumentType |
Standard
|
ISBN |
978-1-5044-0592-8
|
Pages |
94
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
IEEE C37.16-2009 | IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
MIL-G-19826 Revision F:1984 | GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED) |
TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
IEEE C37.17-2022 | IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers |
IEEE C37.27-2015 | IEEE Guide for Low-Voltage AC (635 V and below) Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses |
IEEE 421.3-2016 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
C22.2 NO. 31-18 | Switchgear assemblies |
CSA C22.2 No. 5 : 2013 | MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES |
IEEE DRAFT C37.108 : D6 98 | DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS |
IEEE DRAFT C37.123 : D2 FEB 96 | DRAFT GUIDE TO SPECIFICATIONS FOR GAS-INSULATED ELECTRIC POWER SUBSTATION EQUIPMENT |
IEEE 3004.5-2014 | IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems |
IEEE 45-7 : 2012 | RECOMMENDED PRACTICE FOR ELECTRICAL INSTALLATIONS ON SHIPBOARD - AC SWITCHBOARDS |
ANSI C37.51 : 1989 | SWITCHGEAR - METAL-ENCLOSED LOW-VOLTAGE AC POWER - CIRCUIT BREAKER SWITCHGEAR ASSEMBLIES - CONFORMANCE TEST PROCEDURES |
ANSI C37.50 : 1989 | SWITCHGEAR - LOW VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES - TEST PROCEDURES |
NEMA PB 2:2011 | Deadfront Distribution Switchboards |
IEEE 387-1995 | IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
IEEE 421.3-1997 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
IEEE C37.20 : 69(R1981) | SWITCH GEAR ASSEMBLIES AND METAL-ENCLOSED BUS |
IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
IEEE C37.10-2011 REDLINE | IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures |
API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
IEEE C37.82-1987 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
IEEE C37.27-2008 REDLINE | IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses |
IEEE C37.17-2012 | IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers |
IEEE C37.17-2012 | TRIP DEVICES FOR AC AND GENERAL PURPOSE DC LOW VOLTAGE POWER CIRCUIT BREAKERS |
IEEE DRAFT C37.96 : D5 99 | DRAFT GUIDE FOR AC MOTOR PROTECTION |
IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
ASHRAE 90.4 : 2016 | ENERGY STANDARD FOR DATA CENTERS |
IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
PIP ELEGL03 : 2016 | GUIDELINES FOR POWER SYSTEMS ANALYSIS |
PIP ELSSG01 : 2010 | DESIGN AND FABRICATION OF LOW-VOLTAGE METAL-ENCLOSED AC POWER CIRCUIT BREAKER SWITCHGEAR |
IEEE C37.13.1-2016 | IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage (600 V AC and Below) Power Circuit Breaker Switchgear |
IEEE 3002.3-2018 | IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems |
IEEE C37.82-2017 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
IEEE C37.14-2015 | IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
IEEE 1-2000 | IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation |
IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
ANSI C37.50 : 1989 | SWITCHGEAR - LOW VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES - TEST PROCEDURES |
UL 248-8:3ED 2011-05-13 | Low-Voltage Fuses - Part 8: Class J Fuses |
NEMA CP 1:2000 (R2008) | SHUNT CAPACITORS |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE C37.20.10-2016 | IEEE Standard Definitions for AC (52 kV and below)and DC (3.2 kV and below) Switchgear Assemblies |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
UL 248-10:3ED 2011-05-13 | Low-Voltage Fuses - Part 10: Class L Fuses |
UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
IEEE C37.24-2003 | IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
IEEE C37.27-2008 REDLINE | IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses |
IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
IEEE C37.17-2012 | IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.