ISO 4200:1991
Current
Current
The latest, up-to-date edition.
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
21-02-1991
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Gives values of both plain end tubes for general purpose use and precision tubes. Its purpose is to give guidance on the selection of sizes for all activities concerned with the standardization of steel tubes, both nationally and internationally, to serve as a ready reckoner and to avoid the use by different countries of different masses for a tube of the same size. It is not applicable to tubes primarily intended to be screwed. This fourth edition cancels and replaces the third edition (1985), tables 2 and 3 of which have been technically revised by the addition of the outside diameter of 12.7 mm to series 2.
| Committee |
ISO/TC 5/SC 1
|
| DevelopmentNote |
Supersedes ISO 3311, 560, 336, 134, 64 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS 51982 : 1982 | Similar to |
| NFA 49 005 : 1994 | Similar to |
| UNI ISO 4200 : 1989 | Identical |
| NFA 49 004 : 1984 | Similar to |
| DIN V ENV 10220:1994-02 | Identical |
| DIN ISO 4200:1981-02 | Identical |
| NS ISO 4200 : 1ED 1991 | Identical |
| PN ISO 4200 : 1998 | Identical |
| NBN E 29 318 : 1989 | Identical |
| DIN 2460:2006-06 | Identical |
| DIN 2448:1981-02 | Similar to |
| DIN 2458:1981-02 | Similar to |
| 93/701503 DC : DRAFT FEB 1993 | ISO/DIS 10806 - PIPEWORK - NON-ALLOYED AND ALLOYED STAINLESS STEEL FITTINGS FOR CORRUGATED FLEXIBLE METALLIC HOSES |
| 10/30234318 DC : DRAFT DEC 2010 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| 16/30340536 DC : 0 | BS EN 12627 - INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| 06/30143321 DC : DRAFT JULY 2006 | ISO 7005-1 - METALLIC FLANGES - PART 1: STEEL FLANGES |
| I.S. EN 12334:2001 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| I.S. EN 50636-2-107:2015 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| 14/30299749 DC : 0 | BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| ISO 6182-12:2014 | Fire protection Automatic sprinkler systems Part 12: Requirements and test methods for grooved-end components for steel pipe systems |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 05/30132854 DC : DRAFT APR 2005 | EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 04/19970079 DC : DRAFT JULY 2004 | BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - REQUIREMENTS AND TEST METHODS FOR GROOVED END PIPE COUPLINGS |
| 03/118014 DC : DRAFT DEC 2003 | ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
| DIN 2605-1:1991-02 | STEEL BUTT-WELDING PIPE FITTINGS - ELBOWS AND BENDS WITH REDUCED PRESSURE FACTOR |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| ISO 12149:1999 | Bolted bonnet steel globe valves for general-purpose applications |
| ISO 15348:2002 | Pipework Metal bellows expansion joints General |
| ISO 9330-2:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| DIN EN ISO 10434:2005-01 | BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| BS EN 13631-10:2003 | Explosives for civil uses. High explosives Method for the verification of the means of initiation |
| BS EN 196-1:2016 | Methods of testing cement Determination of strength |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| BS EN ISO 15749-2:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for gravity system |
| BS EN 14714:2005 | Inland navigation vessels. Connection nozzle for equipment and devices at cargo tanks. Dimensions |
| DIN EN ISO 15749-3:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004) |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| DIN EN ISO 15748-2:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION |
| EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| PREN 14364 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| IEC 60335-2-107:2017 | Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers |
| BS ISO 7005-1:2011 | Pipe flanges Steel flanges for industrial and general service piping systems |
| 11/30173941 DC : 0 | BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| ISO 9330-1:1990 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
| I.S. EN 10220:2002 | SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
| 09/30211102 DC : 0 | BS EN 60335-2-107 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 107: PARTICULAR REQUIREMENTS FOR ROBOTIC LAWNMOWERS |
| DIN 2617:1991-02 | STEEL BUTT-WELDING PIPE FITTINGS - CAPS |
| 03/108159 DC : DRAFT JULY 2003 | EN 14714 - INLAND NAVIGATION VESSELS - CONNECTION FOR SAMPLING DEVICES AT CARGO TANKS - DIMENSIONS |
| ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| 11/30249105 DC : 0 | BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| 11/30246455 DC : 0 | BS EN 1796 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| UNI EN 14364 : 2013 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| DIN 28105:2002-04 | CHEMICAL EQUIPMENT - PROCESS EQUIPMENT AND VESSELS WITH TWO DOMED ENDS - DEFINITIONS, NOMINAL CAPACITY, NOMINAL DIAMETERS, MAIN DIMENSIONS |
| 07/30164079 DC : 0 | BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH |
| BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| PREN 12760 : DRAFT 2015 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| BS EN 50636-2-107:2015 | Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers |
| BS ISO 15348:2002 | Pipework. Metal bellows expansion joints. General |
| CEI EN 60534-8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| BS EN 60534-8-2:2011 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| UNI EN 1796 : 2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| I.S. EN 12516-1:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| ISO 1609:1986 | Vacuum technology Flange dimensions |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ISO 559:1991 | Steel tubes for water and sewage |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| DIN EN 12760:2016-07 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| DIN EN 14267:2004-10 | Irrigation techniques - Irrigation hydrants |
| DIN EN 14364:2013-05 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 13631-11:2003 | Explosives for civil uses. High explosives Determination of transmission of detonation |
| BS EN ISO 10806:2003 | Pipework. Fittings for corrugated metal hoses |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| BS EN 12334:2001 | Industrial valves. Cast iron check valves |
| BS EN 10220:2002 | Seamless and welded steel tubes. Dimensions and masses per unit length |
| BS EN ISO 15748-1:2002 | Ships and marine technology. Potable water supply on ships and marine structures Planning and design |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| BS EN 836 : 1997 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| I.S. EN 1267:2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| DIN EN 12334:2004-10 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| DIN EN 12334:2001-04 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| DIN EN ISO 10806:2004-03 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003) |
| DIN EN 1796:2013-05 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| I.S. EN 12561-3:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| I.S. EN 1796:2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| I.S. EN 14364:2013 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| I.S. EN 12760:2016 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| I.S. EN 12561-2:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| I.S. EN 196-1:2016 | METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH |
| BS 4127:1994 | Specification for light gauge stainless steel tubes, primarily for water applications |
| BS 3600:1976 | Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes |
| VDI 6002 Blatt 1:2014-03 | Solar heating for potable water - Basic principles - System technology and application in residential buildings |
| 08/30184280 DC : DRAFT SEP 2008 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| 95/702085 DC : DRAFT FEB 1995 | ISO/DIS 10434 - PETROLEUM AND NATURAL GAS INDUSTRIES - BOLTED BONNET STEEL GATE VALVES FOR REFINERY AND RELATED APPLICATIONS - BASIC REQUIREMENTS |
| 08/30163745 DC : DRAFT SEP 2008 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 95/717060 DC : DRAFT DEC 1995 | ISO/DIS 12149 - BOLTED BONNET STEEL GLOBE VALVES FOR GENERAL PURPOSE APPLICATIONS |
| BS 6323-4:1982 | Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes Specific requirements for cold finished seamless steel tubes |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| 16/30328642 DC : 0 | BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS |
| 15/30322555 DC : 0 | BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
| UNE-EN 60335-2-77:2011 | Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| NF ISO 14661 : 2000 AMD 1 2004 | THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
| BS 4504-3.1:1989 | Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| 02/711048 DC : DRAFT SEP 2002 | EN ISO 10434 - BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 11/30246458 DC : 0 | BS EN 14364 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| 05/19984709 DC : DRAFT MAR 2005 | EN 15179 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF PASSENGER COACHES |
| 01/123436 DC : DRAFT SEP 2001 | BS EN 13631-11 - EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 11: METHOD FOR THE DETERMINATION OF TRANSMISSION OF DETONATION |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 00/120644 DC : DRAFT FEB 2000 | ISO/DIS 10639-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS - (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| 15/30327617 DC : 0 | BS EN 12760 - INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| BS EN 60335-2.77 : 2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| EN 1796:2013 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| UNI EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| ISO 679:2009 | Cement Test methods Determination of strength |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| EN 50636-2-107 : 2015 AMD 1 2018 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ISO 9329-3:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| I.S. EN 12627:2017 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| EN 12760:2016 | Industrial valves - Socket welding ends for steel valves |
| EN 12627:2017 | Industrial valves - Butt welding ends for steel valves |
| DIN EN 13631-11:2004-02 | Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation |
| DIN EN 13631-10:2004-02 | Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| ISO 15749-3:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 3: Sanitary drainage, drain piping for vacuum systems |
| BS EN ISO 15748-2:2002 | Ships and marine technology. Potable water supply on ships and marine structures Method of calculation |
| UNE-EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| ISO 15748-2:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 2: Method of calculation |
| EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) |
| I.S. EN ISO 15761:2003 | STEEL GATE, GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER, FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| I.S. EN ISO 10434:2004 | BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| EN ISO 15749-2:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO 15749-2:2004) |
| EN 13631-14:2003 | Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation |
| EN ISO 15749-3:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO 15749-3:2004) |
| EN 13631-10:2003 | Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation |
| UNI EN 1267 : 2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| UNI EN 12561-2 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| UNI EN 836 : 2011 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| BS MA 49:1986 | Summary and application of carbon steel tubes for marine pipework systems |
| UNI EN 12561-3 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| SAE J2614_201801 | Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing |
| ISO 9330-5:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| API 602 RUSSIAN : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| 16/30292774 DC : 0 | BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| 01/123351 DC : DRAFT SEP 2001 | ISO/DIS 10639.3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| ISO 7259:1988 | Predominantly key-operated cast iron gate valves for underground use |
| ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| 02/705734 DC : DRAFT MAY 2002 | EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
| BS EN 60335-2-77:2010 | Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| PREN 12627 : DRAFT 2016 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| API 602 REDLINE : 2009 | STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 91/37838 DC : DRAFT MAR 91 | PREN 10217: PART 1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEELS WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS 6323-5:1982 | Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes Specific requirements for electric resistance welded (including induction welded) steel tubes |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 16/30343625 DC : 0 | BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| SAE J2551_201309 | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| UNI EN ISO 27509 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| SAE J2613_201710 | Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing |
| BS EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNE-EN 12516-1:2016 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| BS EN 12627:2017 | Industrial valves. Butt welding ends for steel valves |
| ISO 9304:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections |
| ISO 1129:1980 | Steel tubes for boilers, superheaters and heat exchangers Dimensions, tolerances and conventional masses per unit length |
| DIN EN 1267:2012-04 | Industrial valves - Test of flow resistance using water as test fluid |
| I.S. EN 60534-8-2:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV)) |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNE-EN 12627:1999 | Industrial valves - Butt welding ends for steel valves |
| IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN 836:2012-07 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| BS EN 12561-3:2011 | Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| UNE-EN 1796:2014 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| BS EN 12561-2:2011 | Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
| BS EN ISO 15749-3:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for vacuum system |
| UNE-EN 12561-2:2012 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| BS EN 1796:2013 | Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| UNE-EN 12561-3:2012 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| BS EN ISO 15749-5:2004 | Ships and marine technology. Drainage systems on ships and marine structures Drainage of decks, cargo spaces and swimming pools |
| ISO 15748-1:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 1: Planning and design |
| ISO 15749-5:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 5: Drainage of decks, cargo spaces and swimming pools |
| BS EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| UNE-EN 12760:2017 | Industrial valves - Socket welding ends for steel valves |
| BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
| BS EN ISO 1127:1997 | Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| UNE-EN 14364:2015 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints |
| ISO 10806:2003 | Pipework Fittings for corrugated metal hoses |
| DIN EN ISO 15749-5:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004) |
| DIN EN ISO 15748-1:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 1: PLANNING AND DESIGN |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN ISO 10806:2003 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003) |
| EN 14714:2005 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| EN ISO 15749-4:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004) |
| EN ISO 15748-2:2002 | Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002) |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| BS 534:1990 | Specification for steel pipes, joints and specials for water and sewage |
| EN ISO 15749-5:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004) |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| EN 12561-2:2011 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| EN 13631-11:2003 | Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation |
| EN 14341:2006 | Industrial valves - Steel check valves |
| EN 836:1997+A4:2011 | Garden equipment - Powered lawnmowers - Safety |
| EN ISO 15748-1:2002 | Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002) |
| 03/321016 DC : DRAFT DEC 2003 | IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| PREN 1796 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| BS 6323-6:1982 | Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes Specific requirements for cold finished electric resistance welded (including induction welded) steel tubes |
| CEI EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| BS ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| DIN 86285:2016-08 | FLANGES FOR INTERNATIONALLY UNIFORM CONNECTION FOR THE DISPOSAL OF OIL RESIDUES |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| NF EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| ISO 9330-4:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| BS ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| BS 5793-8.1:1986 | Industrial-process control valves. Noise considerations Method for laboratory measurement of noise generated by aerodynamic flow through control valves |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 10/30234321 DC : DRAFT DEC 2010 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| 09/30202711 DC : 0 | BS EN 1267 - INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| 08/30179926 DC : DRAFT MAR 2008 | BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| BS 6362:1984 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
| EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| DIN EN 12516-1:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 9330-3:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| I.S. EN 60335-2-77:2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| DIN EN 12561-2:2011-10 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| DIN EN 12561-3:2011-10 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 13631-14:2003 | Explosives for civil uses. High explosives Determination of velocity of detonation |
| ISO 15749-4:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 4: Sanitary drainage, sewage disposal pipes |
| ISO 15749-2:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 2: Sanitary drainage, drain piping for gravity systems |
| ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 15749-4:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, sewage disposal pipes |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 12760:1999 | Valves. Socket welding ends for steel valves |
| BS EN 1267:2012 | Industrial valves. Test of flow resistance using water as test fluid |
| EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| DIN EN ISO 15749-4:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004) |
| DIN EN 14714:2005-06 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| DIN EN 836 A1 : 1998 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| DIN EN ISO 15749-2:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004) |
| EN 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| I.S. EN 12255-1:2002 | WASTEWATER TREATMENT PLANTS - PART 1: GENERAL CONSTRUCTION PRINCIPLES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.