ISO 497:1973
Current
Current
The latest, up-to-date edition.
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-05-1973
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This is an additional guide to ISO 17 for selecting specified series with more rounded values. It shows the conditions for the use of these preferred numbers.
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| AS 2752-1985 | Identical |
| BS 2045:1965 | Identical |
| UNE 37104:1981 | Identical |
| BIS IS 1076-3 : 1985(R2016) | Identical |
| PN ISO 497 : 2002 | Identical |
| NS 379 : 2ED 1972 | Similar to |
| NBN C 86 010 : 1984 | Identical |
| AS 2751 SUPP 2-1989 | Identical |
| PNE 82007 | Identical |
| BS 5724-2-45(2001) : 2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-45: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAMMOGRAPHIC X-RAY EQUIPMENT AND MAMMOGRAPHIC STEREOTACTIC DEVICES |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| 08/30092426 DC : DRAFT JULY 2008 | BS ISO 12162 - THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION COEFFICIENT, AND DESIGNATION |
| BS EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| UNI EN ISO 21003-1 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| 08/30174014 DC : DRAFT JUNE 2008 | BS ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT-PIPES |
| BS ISO 16877:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH |
| PD R086-001:2000 | Guidance for technology audit of fibre optic connector kits and terminated connectors |
| ISO 4393:2015 | Fluid power systems and components Cylinders Basic series of piston strokes |
| 17/30351670 DC : 0 | BS ISO 4065 - THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE |
| BS EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes |
| 17/30363845 DC : 0 | BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| 09/30170496 DC : 0 | BS EN 60601-2-45 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-45: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAMMOGRAPHIC X-RAY EQUIPMENT AND MAMMOGRAPHIC STEREOTACTIC DEVICES |
| BS EN 62358 : 2012 | FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE |
| I.S. EN 125000:1999 | CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION) |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
| BS ISO 6580:2005 | General-purpose industrial fans. Circular flanges. Dimensions |
| DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| DIN ISO 16486-1:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014) |
| 12/30257534 DC : 0 | BS ISO 18225 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| I.S. EN ISO 11299-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| BS EN ISO 13351:2009 | Fans. Dimensions |
| 04/30126883 DC : DRAFT DEC 2004 | ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS |
| 08/30172449 DC : DRAFT APR 2008 | BS ISO 8779 - PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| BS 8588:2017 | Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm |
| 06/30107360 DC : 0 | IEC 60601-1-3 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| I.S. EN 153000:1998 | DISCRETE PRESSURE CONTACT POWER SEMICONDUCTOR DEVICES (QUALIFICATION APPROVAL) (GENERIC SPECIFICATION) |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| BIS IS 13450-1-3 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - SECTION 3: COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT |
| ISO 4783-3:1981 | Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens |
| S.R. CEN/TS 15223:2017 | PLASTICS PIPING SYSTEMS - VALIDATED DESIGN PARAMETERS OF BURIED THERMOPLASTICS PIPING SYSTEMS |
| UNI EN ISO 11299-3 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| IEC 61253-1:1993 | Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval |
| ISO 11298-3:2010 | Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes |
| ISO 17484-1:2014 | Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems |
| UNE-EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| ISO 6580:2005 | General-purpose industrial fans Circular flanges Dimensions |
| UNI EN 1555-1 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN 12007-2:2012-10 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN 818-3 : 1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| BS EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| IEC 60601-2-44:2009+AMD1:2012+AMD2:2016 CSV | Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
| EN 125000:1997 | Generic Specification: Cores made of ferrite materials |
| EN 60601-2-7:1998 | Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| EN 153000:1998 | Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval) |
| DIN EN 1452-1:1999-09 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| DIN EN 13244-1:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 134000:1994 | Generic Specification: Variable capacitors (Qualification approval and capability approval) |
| EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| DIN EN 562:2003-09 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 129000:1993/A1:1995 | GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS |
| EN 12007-2:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| EN 133000:1997 | Generic Specification: Passive filter units for electromagnetic interference suppression |
| 01/123802 DC : DRAFT OCT 2001 | BS ISO 14531-2 - PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE TRANSPORT OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 2: FITTINGS FOR HEAT FUSION JOINTING |
| 14/30268499 DC : 0 | BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
| BS CECC 25000:1977 | Specification for harmonized system of quality assessment for electronic components: generic specification: inductor and transformer cores for telecommunications |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| 07/30173191 DC : 0 | BS ISO 5171 - GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| BS EN 129000:1996 | Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors |
| 02/121564 DC : DRAFT APR 2002 | BS EN 14409-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| I.S. EN 14408-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 14409-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| I.S. EN 13244-1:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL |
| 04/30126864 DC : DRAFT DEC 2004 | ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| ISO 16872:2015 | Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH |
| 18/30364236 DC : 0 | BS ISO 1835 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS - GRADE 4, STAINLESS STEEL |
| BS EN 60601-2-44 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009) |
| 04/30126871 DC : DRAFT DEC 2004 | ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS |
| 02/121566 DC : DRAFT APR 2002 | BS EN 14408-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 08/30191187 DC : DRAFT OCT 2008 | BS EN 62358 - FERRITE CORES - STANDARD INDUCTANCE FACTOR (AL) AND ITS TOLERANCE |
| ISO 19899:2010 | Plastics piping systems Polyolefin pipes and mechanical fitting assemblies Test method for the resistance to end load (AREL test) |
| BS 2782-11:Method 1121C:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series |
| BS EN 137000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General |
| CEI EN 62358 : 2013 | FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE |
| DIN EN ISO 13351:2011-11 | Fans - Dimensions (ISO 13351:2009) |
| DIN EN 60601-2-7 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| CSA Z234.3 : 1989 | GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| BS EN 138000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required) |
| ISO 4065:2018 | Thermoplastics pipes — Universal wall thickness table |
| ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
| EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| I.S. EN ISO 11297-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| IEC TS 62398:2004 | Ferrite cores - Technology approval schedule (TAS) |
| ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools |
| NF EN ISO 5171 : 2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN ISO 11297-3:2013-11 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| UNE-EN ISO 11297-3:2014 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| UNE-EN ISO 11299-3:2014 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| BS EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient |
| I.S. EN 818-3:1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| DIN EN 14409-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN 818-3:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| I.S. EN 818-5:1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| I.S. EN 60601-1-3:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT |
| EN 60601-1-3 : 2008 AMD 11 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008/A1:2013) |
| I.S. EN 818-4:1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| I.S. EN 12007-2:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| I.S. EN 818-2:1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| BS 6339(2005) : 2005 | GENERAL-PURPOSE INDUSTRIAL FANS - CIRCULAR FLANGES - DIMENSIONS |
| DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| VDE 0750-2-7 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| I.S. EN ISO 12162:2009 | THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT (ISO 12162:2009) |
| DIN SPEC 19674-1:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General |
| 04/30112659 DC : 0 | IEC 62398 ED.1 - TECHNOLOGY APPROVAL SCHEDULE FOR FERRITE CORES |
| I.S. EN 1452-1:1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| 97/231700 DC : DRAFT DEC 1997 | IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 140000:1995 | Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors |
| 12/30258383 DC : 0 | BS EN ISO 11297-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES |
| ISO 16877:2015 | Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH |
| 08/30185535 DC : DRAFT JULY 2008 | BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL |
| BS 2782-11.1121A(1996) : 1996 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES, THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION AND DESIGN OVERALL SERVICE (DESIGN) COEFFICIENT |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings General |
| 16/30340367 DC : 0 | BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| BS EN 133000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| BS EN 120000:1996 | Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices |
| 04/30107711 DC : DRAFT JAN 2004 | ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS) |
| 08/30191143 DC : 0 | BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| 06/30146370 DC : DRAFT SEP 2006 | ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL |
| 07/30136476 DC : DRAFT APR 2007 | IEC 60601-2-44 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| BS ISO 4393:2015 | Fluid power systems and components. Cylinders. Basic series of piston strokes |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| BS EN 125000:1998 | Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| ISO 5171:2009 | Gas welding equipment Pressure gauges used in welding, cutting and allied processes |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| UNE-EN 60601-2-44:2010 | Medical electrical equipment -- Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| I.S. EN 138000:1998 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION) |
| I.S. EN 133000:1998 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| ONORM EN ISO 5171 : 2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| HD 395.2.7 : 200S1 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| ISO 6993-3:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| DIN EN 818-2:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| DIN EN 818-5:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| BS EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks Lining with close fit pipes |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| BS EN 12007-2:2012 | Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| UNE-EN 12007-2:2013 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| UNI EN 818-4 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| UNI EN 12007-2 : 2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| UNI EN 12201-1 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| UNI EN ISO 12162 : 2010 | THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT |
| UNI EN 818-3 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
| UNI EN 818-5 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| UNI EN 818-2 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| DIN EN ISO 21003-1:2008-11 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008); German version EN ISO 21003-1:2008 |
| BS ISO 161-1:2018 | Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures Metric series |
| ISO 6328:2000 | Photography Photographic materials Determination of ISO resolving power |
| ISO 14531-2:2004 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing |
| BS ISO 14531-2:2004 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings for heat-fusion jointing |
| BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools |
| BS 848-4(1997) : 1997 | FANS FOR GENERAL PURPOSES - PART 4: DIMENSIONS |
| 11/30248330 DC : 0 | BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL |
| I.S. EN ISO 1452-1:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| 16/30354166 DC : 0 | BS ISO 161-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - PART 1: METRIC SERIES |
| I.S. EN 562:2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| BS ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| BS EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General |
| BS ISO 19899:2010 | Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test) |
| 10/30208795 DC : 0 | BS EN 12007-2 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| PREN 12007-2 : DRAFT 2010 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| BS ISO 6328:2000 | Photography. Photographic materials. Determination of ISO resolving power |
| 12/30264202 DC : 0 | BS EN ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| UNI EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| IEC 61045-1:1991 | Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification |
| 13/30268502 DC : 0 | BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
| BS EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures |
| 07/30166162 DC : 0 | BS IEC 60601-2-44 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| BS EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes |
| BS 2782-11:Method 1121B:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series |
| BS EN 130000:1994 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS ISO 16872:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH |
| BS CECC 299001:1999 | Technology approval schedule. Manufacture of electrical connectors |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| I.S. EN ISO 5171:2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 6993-2:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
| I.S. EN 134000:1994 | GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL) |
| NF EN 60601 1-3 : 2008 AMD 1 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT |
| I.S. CECC 33000:1994 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
| UNI EN ISO 11297-3 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| BS EN ISO 5171:2010 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| CEN/TS 15223:2017 | Plastics piping systems - Validated design parameters of buried thermoplastics piping systems |
| ISO 14531-1:2002 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
| ISO 4427-1:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
| ISO 8779:2010 | Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
| EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| I.S. HD 395-2-7:1990 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| EN 60601-2-44:2009/A2:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009/A2:2016) |
| BS EN 818-4 : 1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| UNE-EN ISO 5171:2011 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) |
| IEC 60601-1-3:2008+AMD1:2013 CSV | Medical electrical equipment - Part 1-3: General requirements forbasic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| IEC 62358:2012 | Ferrite cores - Standard inductance factor for gapped cores and its tolerance |
| ISO 13351:2009 | Fans — Dimensions |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| BS EN 818-2 : 1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
| BS EN 60601-1-3 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008) |
| IEC 60601-2-7:1998 | Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators |
| BS EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| BS EN 818-5 : 1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| EN ISO 13351:2009 | Fans - Dimensions (ISO 13351:2009) |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes |
| EN 818-3:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
| EN ISO 5171:2010 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) |
| EN 818-2:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
| EN 562 : 2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 818-5:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
| 17/30363924 DC : 0 | BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| ISO 11299-3:2011 | Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes |
| 10/30206101 DC : 0 | BS ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LIMNING WITH CLOSE-FIT PIPES |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| 17/30361344 DC : 0 | BS EN ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| PREN 17176-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| 05/30130524 DC : DRAFT MAR 2005 | ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL |
| BS ISO 4427-1 : 2007 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL |
| ISO 18225:2012 | Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems |
| CEI EN 138000 : 1996 | GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| 05/30127475 DC : DRAFT JAN 2005 | |
| 14/30291027 DC : 0 | BS ISO 4393 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - BASIC SERIES OF PISTON STROKES |
| CSA C22.2 No. 60601.2.7 : 0 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| BS 7579:1992 | Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens |
| 08/30179691 DC : DRAFT MAR 2008 | BS ISO 16630 - METALLIC MATERIALS - METHOD OF HOLE EXPANDING TEST |
| BS ISO 18225:2012 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| I.S. EN ISO 13351:2009 | FANS - DIMENSIONS |
| BS ISO 17484-1:2014 | Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems |
| UNI EN ISO 11298-3 : 2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 11/30237753 DC : 0 | BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS |
| I.S. 329:2015 | GAS DISTRIBUTION MAINS (EDITION 3) |
| ANSI B93.56M : 82(R1996) | FLUID POWER SYSTEMS AND PRODUCTS - CYLINDERS - BASIC SERIES OF PISTON STROKES, |
| I.S. EN ISO 11298-3:2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 60601-2-44:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| BS ISO 8779 : 2010 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| UNI 10667-13 : 2013 | PLASTIC RAW-SECONDARY MATERIALS FILLERS OBTAINED FROM GRINDING OF PRODUCTION AND/OR POST-CONSUMER WASTE OF REINFORCED PLASTICS COMPOSITES - PART 13: REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 13351 : 2010 | FANS - DIMENSIONS |
| I.S. EN ISO 21003-1:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| ISO 6993-1:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| UNI EN ISO 5171 : 2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General |
| DIN EN ISO 5171:2010-07 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| ISO/TS 16630:2003 | Metallic materials Method of hole expanding test |
| I.S. EN 62358:2012 | FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE (IEC 62358:2012 (EQV)) |
| ISO 15439-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General |
| DIN EN 14408-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| BS EN 1452-1 : 2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN ISO 10931 : 2005 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| BS EN 562:2003 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| OVE/ONORM EN 60601-1-3 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008 + A1:2013) |
| DIN EN ISO 11298-3:2011-07 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| EN 137000:1995 | Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| DIN EN ISO 11299-3:2013-05 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| EN 62358:2012 | FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE (IEC 62358:2012) |
| DIN EN 818-4:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| EN 140000 : 1993 | GENERIC SPECIFICATION: FIXED RESISTORS |
| UNE-EN 60601-1-3:2008 | Medical electrical equipment- Part 1-3: General requirements for basic safety and essential performance- Collateral Standard: Radiation protection in diagnostic X-ray equipment |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| BS CECC 30000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS CECC 30000:1984 | Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors |
| CEI EN 60115-1:2023 | Fixed resistors for use in electronic equipment Part 1: Generic specification |
| NS-EN ISO 16486-1:2023 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2023) |
| CEI EN IEC 60393-4:2024 | Potentiometers for use in electronic equipment - Part 4: Sectional specification: single-turn rotary power potentiometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.