ISO 5725-4:1994
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
30-03-2020
Superseded by
Language(s)
English, French
Published date
22-12-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Provides basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied. In order that the measurements are made in the same way, it is important that the measurement method has been standardized. Can be applied only if the accepted reference value can be established as a conventional true value, e.g. by measurement standards or suitable reference materials or by referring to a reference measurement method or by preparation of a known sample.
| DevelopmentNote |
Along with ISO 5725-1, ISO 5725-2, ISO 5725-3, ISO 5725-5 and ISO 5725-6, it supersedes ISO 5725. (04/2001) Supersedes NEN ISO 5725. (01/2003)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN ISO 5725:1988-04 | Identical |
| BIS IS 15393-4 : 2003 | Identical |
| PN ISO 5725-4 : 2002 | Identical |
| GOST R ISO 5725-4 : 2002 | Identical |
| NF ISO 5725-4 : 1994 | Identical |
| SS-ISO 5725-4:2003 | Identical |
| DIN ISO 5725-4:2003-01 | Identical |
| UNI ISO 5725-4 : 2004 | Identical |
| UNE 82009-4:1999 | Identical |
| NBN ISO 5725 4 : 1996 | Identical |
| BS ISO 5725-4:1994 | Identical |
| JIS Z 8402-4:1999 | Identical |
| DIN ISO 5725:1988-04 | Corresponds |
| 19/30329303 DC : 2019 | Identical |
| 09/30187538 DC : 0 | BS EN 15979 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| 14/30261903 DC : 0 | BS EN 16711-1 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| BS EN ISO 13843:2017 | Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| I.S. EN 12506:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| 04/30114476 DC : DRAFT JUN 2004 | EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| 04/30114470 DC : DRAFT JUN 2004 | EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD |
| I.S. EN ISO 14720-1:2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013) |
| 08/30181397 DC : DRAFT APR 2008 | BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| I.S. EN ISO 14720-2:2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013) |
| PD 6644-1:1999 | Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| BIS IS 15393-6 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| 09/30187541 DC : 0 | BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| I.S. EN 16466-1:2013 | VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 1: [2]H-NMR ANALYSIS OF ACETIC ACID |
| BS EN 16466-3:2013 | Vinegar. Isotopic analysis of acetic acid and water <sup>18</sup>O-IRMS analysis of water in wine vinegar |
| DIN EN 15991:2016-02 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| BS EN 16466-2:2013 | Vinegar. Isotopic analysis of acetic acid and water <sup>13</sup>C-IRMS analysis of acetic acid |
| 17/30319520 DC : 0 | BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES |
| 04/30118518 DC : DRAFT AUG 2004 | EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| DIN EN 16466-2:2013-03 | Vinegar - Isotopic analysis of acetic acid and water - Part 2: <(hoch)13>C-IRMS analysis of acetic acid |
| 11/30227624 DC : 0 | BS EN ISO 14720-2 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP/AES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW |
| BS EN ISO 11876:2010 | Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method |
| 11/30218023 DC : 0 | BS EN ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| 04/30114464 DC : DRAFT JUN 2004 | EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| BS 6043-3.4:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| 14/30283682 DC : 0 | BS ISO 14707 - SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE |
| BS ISO 11877:2008 | Hardmetals. Determination of silicon in cobalt metal powders. Photometric method |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| 04/30118511 DC : DRAFT AUG 2004 | EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| 03/306294 DC : DRAFT APR 2003 | EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| 07/30163069 DC : 0 | BS EN 14123 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
| ISO 11877:2008 | Hardmetals — Determination of silicon in cobalt metal powders — Photometric method |
| ISO 12985-1:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method |
| UNE-EN 16466-2:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis of acetic acid |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| I.S. EN 60456:2016 | CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN ISO 18369-1:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01) |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ISO 12985-2:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| UNE-EN 16466-1:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic acid |
| I.S. EN 16466-2:2013 | VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 2: [13]C-IRMS ANALYSIS OF ACETIC ACID |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN 13040:2008-01 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN 14524:2004 | Foodstuffs. Determination of okadaic acid in mussels. HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection |
| BS EN 14123:2003 | Foodstuffs. Determination of aflatoxin B<sub>1</sub> and the sum of aflatoxin B<sub>1</sub>, B<sub>2</sub>, G<sub>1</sub> and G<sub>2</sub> in peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with postcolumn derivatization and immunoaffinity column clean-up |
| BS EN 10184:2006 | Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method |
| ISO 14720-1:2013 | Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| BS EN ISO 9913-2:2000 | Optics and optical instruments. Contact lenses Determination of oxygen permeability and transmissibility by the coulometric method |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| I.S. EN ISO 20743:2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| I.S. EN 61223-2-6:2007 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 13503-3 : 2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| EN ISO 11979-3:2012 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| EN 10184:2006 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| DIN EN 14242:2004-12 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| CR 14377:2002 | Air quality - Approach to uncertainty estimation for ambient air reference measurement methods |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| I.S. EN 14242:2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| DIN EN ISO 14720-2:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013) |
| I.S. EN ISO 11876:2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 11/30227621 DC : DRAFT MAY 2011 | BS EN ISO 14720-1 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS |
| 04/30103818 DC : DRAFT JUL 2004 | ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| 04/30114467 DC : DRAFT JUN 2004 | EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| I.S. CR 14377:2002 | AIR QUALITY - APPROACH TO UNCERTAINTY ESTIMATION FOR AMBIENT AIR REFERENCE MEASUREMENT METHODS |
| BS EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| 16/30310656 DC : 0 | BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS |
| 04/30118515 DC : DRAFT AUG 2004 | EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD |
| BS EN ISO 14720-2:2013 | Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow |
| 03/304751 DC : DRAFT APR 2003 | IEC 61223-3-5 ED.1.0 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| 04/30114482 DC : DRAFT JUN 2004 | EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD |
| 04/30118503 DC : DRAFT AUG 2004 | EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| I.S. EN 13503-3:2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| 04/30114488 DC : DRAFT JUN 2004 | EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD |
| UNI EN ISO 11876 : 2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| PD ISO/TR 22305:2008 | Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| BS ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials Sampling of particulate materials |
| S.R. CLC/TR 50619:2014 | GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| I.S. EN 16711-1:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| BS EN 15991:2015 | Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) |
| UNI EN 15835 : 2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
| 14/30261900 DC : 0 | BS EN 16711-2 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| DD CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| BS EN 15979:2011 | Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS EN 16466-1:2013 | Vinegar. Isotopic analysis of acetic acid and water <sup>2</sup>H-NMR analysis of acetic acid |
| 04/30118507 DC : DRAFT AUG 2004 | EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD |
| 04/30114485 DC : DRAFT JUN 2004 | EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD |
| BS ISO TR 5168:1998 | Measurement of fluid flow. Evaluation of uncertainties |
| BS ISO 8178-2:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
| UNI EN 16204 : 2012 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| ISO 19730:2008 | Soil quality — Extraction of trace elements from soil using ammonium nitrate solution |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| ISO 15790:2004 | Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty |
| UNI CEN ISO/TS 22117 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| UNI EN ISO 14720-2 : 2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW |
| BIS IS 16179-1 : 2014 | STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES |
| UNI EN ISO 14720-1 : 2013 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN ISO 11979-3:2013-04 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| BS EN ISO 20743:2013 | Textiles. Determination of antibacterial activity of textile products |
| ISO 10338:1996 | Optics and optical instruments — Contact lenses — Determination of curvature |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| I.S. EN 10318:2005 | DETERMINATION OF THICKNESS AND CHEMICAL COMPOSITION OF ZINC-AND ALUMINIUM-BASED METALLIC COATINGS - ROUTINE METHOD |
| I.S. EN 13040:2007 | SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY |
| I.S. EN 13656:2002 | CHARACTERISATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]) AND HYDROCHLORIC (HCI) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| I.S. EN ISO 11609:2017 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| I.S. EN 14524:2004 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
| EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| I.S. EN ISO 11979-3:2012 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| UNI EN ISO 21570 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| DIN EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| BS 4401-6:1996 | Methods of test for meat and meat products Determination of chloride content (Volhard method) |
| BIS IS 15393-5 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| VDE 0370-16 : 1999 | INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| S.R. CEN ISO TS 22117:2010 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| I.S. CWA 15261-2:2005 | MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
| UNI EN 15851 : 2010 | Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| BIS IS 16086 : 2013 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| BS ISO/IEC TR 13233:1995 | Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services |
| 04/30114461 DC : DRAFT JUN 2004 | EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD |
| DIN EN 15851:2010-07 | Foodstuffs - Determination of aflatoxin B<(Index)1> in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection; German version EN 15851:2010 |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| DIN EN 16204:2012-08 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| 04/30114473 DC : DRAFT JUN 2004 | EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD |
| DIN EN 16466-1:2013-03 | VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 1: [2]H-NMR ANALYSIS OF ACETIC ACID |
| 04/30114479 DC : DRAFT JUN 2004 | EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD |
| BS EN 15851:2010 | Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| BS ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| BS EN 15428:2007 | Soil improvers and growing media. Determination of particle size distribution |
| 05/30057945 DC : DRAFT APR 2005 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| PD CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| BS ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| BS EN 16711-1:2015 | Textiles. Determination of metal content Determination of metals using microwave digestion |
| BS ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results General principles and definitions |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| 07/30113186 DC : 0 | BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
| 08/30181799 DC : DRAFT JULY 2008 | BS EN 15835 - FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN UP |
| BS ISO 12787:2011 | Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques |
| BIS IS 7920-1 : 2012(R2017) | STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| DIN EN ISO 14720-1:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013) |
| 99/565449 DC : DRAFT OCT 99 | DRAFT BS EN 13725 - AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OFFACTOMETRY |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| BS ISO 19730:2008 | Soil quality. Extraction of trace elements from soil using ammonium nitrate solution |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| EN ISO 20743:2013 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| UNI ISO 11648-2 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| UNI EN 15979 : 2011 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| I.S. EN ISO 13843:2017 | WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017) |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| S.R. CR 10299:1999 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTINE METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| UNE-EN 15835:2010 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
| UNE-EN 16711-2:2016 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| ISO/TS 14167:2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| IPC TM 650-MDP : 2012 | IPC TEST METHOD DEVELOPMENT PACKET |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
| ISO/TR 22305:2006 | Cigarettes Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| ISO 14707:2015 | Surface chemical analysis Glow discharge optical emission spectrometry (GD-OES) Introduction to use |
| IEC 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| UNE-EN ISO 20743:2014 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| UNE-EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| BS EN 12506:2003 | Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl<sup>-</sup>, Co, Cr, Cr VI, Cu, Mo, Ni, NO<sub>2</sub><sup>-</sup>, Pb, total S, SO<sub>4</sub><sup>2-</sup>, V and Zn |
| BS EN 14902:2005 | Ambient air quality. Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter |
| BS EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method |
| EN 13656:2002 | Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| UNI EN 14902 : 2005 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN ISO 11979-3 : 2013 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN 14123 : 2008 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 AND THE SUM OF AFLATOXIN B1, B2, G1 AND G2 IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| 09/30206298 DC : 0 | BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| 12/30245706 DC : 0 | BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS |
| ISO 12787:2011 | Cosmetics Analytical methods Validation criteria for analytical results using chromatographic techniques |
| BS EN 15835:2010 | Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| BS 7755-1.2:1999 | Soil quality. Terminology and classification Terms and definitions relating to sampling |
| BS EN 16204:2012 | Foodstuffs. Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS |
| 16/30279101 DC : DRAFT MAR 2016 | BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS |
| PREN 15979 : DRAFT 2009 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| 04/30124942 DC : DRAFT NOV 2004 | BS EN 61223-2-6 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| DD ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
| 06/30145474 DC : DRAFT JULY 2006 | ISO 11876 - HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN 15835:2010-05 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column clean up and fluorescence detection |
| I.S. EN 16204:2012 | FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS |
| BS ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| 04/30123610 DC : DRAFT OCT 2004 | EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| 07/30150572 DC : 0 | ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| 07/30143612 DC : 0 | ISO 8586-2 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE SELECTION, TRAINING AND MONITORING OF ASSESSORS - PART 2: EXPERT SENSORY ASSESSORS |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| BS EN 61620:1999 | Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| BS EN ISO 18369-1:2017 | Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications |
| 14/30283939 DC : 0 | BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| 08/30188245 DC : DRAFT AUG 2008 | BS EN 15851 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN 15979:2011 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| I.S. EN 15428:2007 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| I.S. EN 15835:2010 | FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
| ISO 13843:2017 | Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods |
| PREN 15991 : DRAFT 2014 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| ISO 19983:2017 | Rubber — Determination of precision of test methods |
| I.S. EN 61223-3-5:2004 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| PREN ISO 20743 : DRAFT 2012 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012) |
| UNI EN ISO 20743 : 2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS |
| CR 10299 : 1998 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 25337:2010 | Plastics Production quality control Statistical method for using single measurements |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| IEC TR 62970:2016 | Guidance on how to conduct round robin tests for household and similar electrical appliances |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| ISO 21570:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods |
| BS EN ISO 8178-2:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site |
| BS EN ISO 21570 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| ISO 11609:2017 | Dentistry — Dentifrices — Requirements, test methods and marking |
| BS EN 14185-2:2006 | Non fatty foods. Determination of N-methylcarbamate residues HPLC method with clean-up on a diatomaceous earth column |
| BS EN 14242:2004 | Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis |
| IEC 61223-2-6:2006 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests imaging performance of computed tomography X-ray equipment |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| UNE-EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| BS EN ISO 20988:2007 | Air quality. Guidelines for estimating measurement uncertainty |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| UNE-EN ISO 11979-3:2013 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| ISO 9913-2:2000 | Optics and optical instruments Contact lenses Part 2: Determination of oxygen permeability and transmissibility by the coulometric method |
| ISO 11876:2010 | Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method |
| BS EN 13370:2003 | Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN<sup>-</sup>, F<sup>-</sup> |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| DIN EN ISO 21570:2013-08 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005 + Cor 1:2006 + Amd 1:2013) |
| ISO 14720-2:2013 | Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow |
| BS EN ISO 11979-3:2012 | Ophthalmic implants. Intraocular lenses Mechanical properties and test methods |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| BS EN 13040:2007 | Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| BS EN ISO 11609:2017 | Dentistry. Dentifrices. Requirements, test methods and marking |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| ISO 11979-3:2012 | Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
| BS EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment |
| BS EN ISO 10338:1998 | Optics and optical instruments. Contact lenses. Determination of curvature |
| ISO 20743:2013 | Textiles Determination of antibacterial activity of textile products |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| BS EN 13657:2002 | Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| DIN EN 14902:2005-10 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 14524:2004 | Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN 14123:2007 | Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup |
| EN ISO 14720-1:2013 | Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013) |
| EN ISO 10338 : 1997 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| EN 16711-2:2015 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| EN ISO 14720-2:2013 | Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013) |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN 14185-2:2006 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 15428:2007 | Soil improvers and growing media - Determination of particle size distribution |
| EN 16711-1:2015 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 11876:2010 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 15851:2010 | Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
| EN ISO 9913-2 : 2000 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - PART 2 - DETERMINATION OF OXYGEN PERMEABILITY AND TRANSMISSIBILITY BY THE COULOMETRIC METHOD |
| EN 16466-1:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic acid |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| EN ISO 20988:2007 | Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007) |
| EN 16466-2:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis of acetic acid |
| I.S. EN 13725:2003 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| EN 15835:2010 | Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection |
| EN 15979:2011 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| EN 16466-3:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water in wine vinegar |
| EN 15991:2015 | Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 16204:2012 | Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS |
| DIN EN 15979:2011-04 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| DIN EN 16711-2:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| DIN EN 16466-3:2013-03 | Vinegar - Isotopic analysis of acetic acid and water - Part 3: <(hoch)18>O-IRMS analysis of water in wine vinegar |
| 06/30142044 DC : 0 | EN 15549 - AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO(A)PYRENE IN AMBIENT AIR |
| 02/101726 DC : 0 | PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| 97/402028 DC : DRAFT FEB 1997 | BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| ISO 11459:1997 | Iron ores — Certified reference materials — Preparation and certification for use in chemical analysis |
| BS 7208-7(1998) : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| BS ISO 14707:2015 | Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use |
| DIN EN 16711-1:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| BS EN ISO 14720-1:2013 | Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Infrared measurement methods |
| 16/30339666 DC : 0 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| BS EN 16711-2:2015 | Textiles. Determination of metal content Determination of metals extracted by acidic artificial perspiration solution |
| I.S. EN 16466-3:2013 | VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 3: [18]O-IRMS ANALYSIS OF WATER IN WINE VINEGAR |
| DD ISO/TS 21749:2005 | Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
| BS ISO 19983:2017 | Rubber. Determination of precision of test methods |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNE-EN 16204:2012 | Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 08/30185684 DC : DRAFT JULY 2008 | BS EN ISO 10360-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| CEI EN 61620 : 1999 | INSULATING LIQUIDS DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| NF EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHODS |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| I.S. EN 16711-2:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| I.S. EN 15851:2010 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| UNE-EN 16466-3:2013 | Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water in wine vinegar |
| UNE-EN 16711-1:2016 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| EN ISO 13843:2017 | Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) |
| ISO 15112:2011 | Natural gas Energy determination |
| BS EN 60456:2016 | Clothes washing machines for household use. Methods for measuring the performance |
| ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| I.S. EN 15991:2015 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| BS EN 13656:2002 | Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO<sub>3</sub>), and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| BS EN 12286:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| DIN EN 14123:2008-03 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| EN 13040:2007 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| DIN EN 14524:2004-10 | FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION |
| EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010) |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| DIN EN 10184:2006-05 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| DIN EN 10318:2005-08 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005 |
| EN 61620:1999 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| AS 5339:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment |
| AS 5337:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
| AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
| AS 5006.2:2019 | Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method |
| AS 5333.1:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room |
| SA/SNZ TS 61724.2:2020 | Photovoltaic system performance Capacity evaluation method (IEC TS 61724-2:2016, MOD) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| SA/SNZ TS 61724.3:2020 | Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD) |
| AS 3515.2:2019 | Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method |
| AS 5333.2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| AS 5332:2019 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.