IEC 61000-4-8 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
CISPR 14-1:2016
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60038:2009
|
IEC standard voltages |
UL 863:8ED 2007-11
|
Standard for Time-Indicating and -Recording Appliances |
IEC 60245-1:2003+AMD1:2007 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 60738-1:2006+AMD1:2009 CSV
|
Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
IEC 60664-4:2005
|
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
UL 514A:11ED 2013-02
|
Metallic Outlet Boxes |
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
UL 50:13ED 2015-10
|
Enclosures for Electrical Equipment, Non-Environmental Considerations |
UL 5085-3:1ED 2006-04
|
Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
UL 486D:6ED 2015-06
|
Sealed Wire Connector Systems |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 60998-2-3:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
ISO 16484-2:2004
|
Building automation and control systems (BACS) — Part 2: Hardware |
UL 4200A:1ED 2015-02
|
Products Incorporating Button Batteries or Coin Cell Batteries |
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
UL 1283:7ED 2017-05
|
Electromagnetic Interference Filters |
IEC 62151:2000
|
Safety of equipment electrically connected to a telecommunication network |
IEC 61558-2-16:2009+AMD1:2013 CSV
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
IEC 61000-4-8:2009
|
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
UL 83:16ED 2017-07
|
Standard for Thermoplastic-Insulated Wires and Cables |
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
|
Low-voltage fuses - Part 1: General requirements |
UL 917:5ED 2006-11
|
Standard for Clock-Operated Switches |
IEC 61558-2-6:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV
|
Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
UL 635:3ED 2012-03
|
Insulating Bushings |
IEC 60227-1:2007
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
IEC 61000-4-6:2013
|
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CISPR 22:2008
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
UL 514C:4ED 2014-04
|
Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
IEC 60998-2-2:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
IEC 60384-17:2005
|
Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
IEC 60738-1-1:2008
|
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
IEC 60099-1:1991+AMD1:1999 CSV
|
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 60423:2007
|
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
UL 372:6ED 2007-07
|
Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
IEC 61643-11:2011
|
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
IEC 61000-3-3:2013 RLV
|
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
UL 746A:6ED 2012-09
|
Polymeric Materials - Short Term Property Evaluations |
UL 429:7ED 2013-11
|
Electrically Operated Valves |
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
CISPR 11:2015 RLV
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
IEC 60695-10-2:2014
|
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
UL 1577:5ED 2014-04
|
Optical Isolators |
IEC 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 62368-1:2014
|
Audio/video, information and communication technology equipment - Part 1: Safety requirements |
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV
|
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
IEC 60384-16:2005
|
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |