• ANSI/CSA FC 1:2014

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY

    Available format(s):  Hardcopy, PDF

    Withdrawn date:  30-03-2014

    Language(s):  English

    Published date:  01-01-2014

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Safety requirements and protective measures
    5 Type tests
    6 Routine tests
    7 Marking, labelling and packaging
    Annex A (informative) - Significant hazards, hazardous
            situations and events dealt with in this standard
    Annex B (informative) - Carburization and material
            compatibility for hydrogen service
    Annex C (informative) - Alternate U.S. standard references
    Annex D (informative) - Additional U.S. standard references
    Annex E (informative) - Guidelines for determining
            compliance of polymeric enclosures, cabinets
            and other parts
    Annex F (informative) - Table of conversion factors
    Bibliography

    Abstract - (Show below) - (Hide below)

    Pertains to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes & Redesignates ANSI Z21.83. (05/2004) Supersedes & Redesignates ANSI FC 1. (02/2014)
    Document Type Revision
    Publisher Canadian Standards Association
    Status Withdrawn
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NFPA 54 : 2018 NATIONAL FUEL GAS CODE
    ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
    NFPA 2:2023 Hydrogen Technologies Code
    NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
    ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
    ICC IFGC CODE AND COMMENTARY : 2015 IFGC® Code and Commentary
    ICC IMC Code and Commentary : 2015 IMC® Code and Commentary
    ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
    ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
    SAE J 2579 : 2013 STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES
    ICC 2012 INTERNATIONAL MECH. CODE : 2012 INTERNATIONAL MECHANICAL CODE

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61025:2006 Fault tree analysis (FTA)
    ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
    BS 7886:1997 Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique
    ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
    ANSI S1.23 : 1976 DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT, METHOD FOR THE
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IAPMO UNIFORM PLUMBING CODE : 2012 2012 UNIFORM PLUMBING CODE
    IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
    CSA 4.9 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
    IEC 61000-3-11 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-11: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS - EQUIPMENT WITH RATED CURRENT <= 75 A AND SUBJECT TO CONDITIONAL CONNECTION
    ANSI Z21.13 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
    ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
    ASME B31.1 : 2016 POWER PIPING
    NFPA 853 : 2010 INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS
    CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
    IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
    ASTM G 146 : 2001 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
    ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
    ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
    ANSI S1.4 : 1983 SPECIFICATION FOR SOUND LEVEL METERS
    ISO 9587:2007 Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
    IEC TS 62282-1:2013 Fuel cell technologies - Part 1: Terminology
    NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    NFPA 79 : 2015 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
    UL 60335-1:6ED 2016-10 Standard for Safety of Household and Similar Appliances, Part 1: General Requirements
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    ANSI NGV3.1 : 2014 FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES
    UL 795:8ED 2016-12 Commercial-Industrial Gas Heating Equipment
    NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
    ASME B31.3:2016 PROCESS PIPING
    IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
    ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
    IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
    NFPA 496 : 2017 PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
    ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
    ISO 15330:1999 Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
    ISO 15724:2001 Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
    CFR 47(PTS0-19) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
    IEC 62040-1:2017 EXV UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
    IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
    ICC 2006 INTERNATIONAL PLUMBING CODE : 2006 INTERNATIONAL PLUMBING CODE
    DIN 8572-1:1981-03 DETERMINATION OF HYDROGEN IN DEPOSITED WELD METAL; MANUAL ARC WELDING WITH COVERED ELECTRODE
    ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
    UL 60730-2-9:4ED 2017-02 Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
    ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
    AWS A4.3 : 1993 DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING
    UL 2075:2ED 2013-03 Gas and Vapor Detectors and Sensors
    ISO 5388:1981 Stationary air compressors Safety rules and code of practice
    ASTM B 849 : 2002 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
    IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    CSA 6.10 : 2015 CONNECTORS FOR GAS APPLIANCES
    NFPA 274 : 2013 TEST METHOD TO EVALUATE FIRE PERFORMANCE CHARACTERISTICS OF PIPE INSULATION
    ISO 14847:1999 Rotary positive displacement pumps Technical requirements
    ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
    ICC 2009 INTERNATIONAL PLUMBING CODE : 2009 INTERNATIONAL PLUMBING CODE
    SAE J 1739 : 2009 POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
    ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
    ISO 7539-6:2011 Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ASCE 7 10 : 2010 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
    API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
    ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
    ANSI S1.10 : 66(R2001) AMERICAN NATIONAL STANDARD METHOD FOR THE CALIBRATION OF MICROPHONES
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    ISO 9588:2007 Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
    UL 372:6ED 2007-07 Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components
    SAE AMS 2759/9 : 2009 HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
    IEC TS 61000-3-4:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
    ICC 2000 INTERNATIONAL PLUMBING CODE : 2000 INTERNATIONAL PLUMBING CODE
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    DIN 8572-2:1981-03 DETERMINATION OF DIFFUSIBLE HYDROGEN IN WELD METAL; SUBMERGED ARC WELDING
    API 934-A : 2008 MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
    IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
    IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
    ICC 2003 INTERNATIONAL PLUMBING CODE : 2003 INTERNATIONAL PLUMBING CODE
    IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
    ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
    ISO 26142:2010 Hydrogen detection apparatus Stationary applications
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    ASTM F 2078 : 2015 : REDLINE Standard Terminology Relating to Hydrogen Embrittlement Testing
    UL 746A:6ED 2012-09 Polymeric Materials - Short Term Property Evaluations
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    UL 429:7ED 2013-11 Electrically Operated Valves
    SAE J 30 : 2012 FUEL AND OIL HOSES
    ISO 3690:2012 Welding and allied processes Determination of hydrogen content in arc weld metal
    ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    UL 60730-1:5ED 2016-08 Automatic Electrical Controls - Part 1: General Requirements
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
    ISO 2626:1973 Copper Hydrogen embrittlement test
    NFPA 54 : 2018 NATIONAL FUEL GAS CODE
    ASTM F 1624 : 2012-11 TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
    ASME PV CODE SET : 2017 BOILER AND PRESSURE VESSEL CODE - COMPLETE SET
    ASTM F 326 : 1996 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    ANSI Z21.24 : 2015 CONNECTORS FOR GAS APPLIANCES
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    UL 515:2ED 2015-07 Standard for Electrical Resistance Trace Heating for Commercial Applications
    UL 60079-0:6ED 2013-07 Explosive Atmospheres - Part 0: Equipment - General Requirements
    SAE USCAR 5 : 2012 AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL
    ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
    SAE AMS 2451/4D : 2017 PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective