IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)

Current

Current The latest, up-to-date edition.

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English

Published date: 30-04-2012

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 General
5 Test levels
6 Test equipment
7 Test setup
8 Test procedure
9 Evaluation of test results
10 Test report
Annex A (informative) - Information on the
        electrical fast transients
Annex B (informative) - Selection of the test
        levels
Annex C (informative) - Measurement
        uncertainty (MU) considerations
Bibliography

Abstract - (Show below) - (Hide below)

Pertains to the immunity of electrical and electronic equipment to repetitive electrical fast transients.

General Product Information - (Show below) - (Hide below)

Committee	TC 77
Development Note	Supersedes IEC 60801-4 (03/2001) Stability Date: 2018. (09/2017)
Document Type	Redline
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60801-4 : 1ED 88

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 61000-4-4 : 2012	Identical
GOST IEC 61000-4-4 : 2016	Identical
NBR IEC 61000-4-4 : 2015	Identical
NEN EN IEC 61000-4-4 : 2012	Identical
PN EN 61000-4-4 : 2013	Identical
AS/NZS IEC 61000.4.4:2013	Identical
VDE 0847-4-4 : 2013	Identical
NF EN 61000-4-4 : 2013	Identical
EN 61000-4-4 : 2012	Identical
CSA IEC 61000-4-4 : 2016	Identical
DIN EN 61000-4-4 : 2013	Identical
SN EN 61000-4-4 : 2004	Identical
SANS 61000-4-4 : 2.01ED 2011	Identical
NEN 11000-4-4 : 1995	Identical
NBN EN 61000 4-4 : 2013	Identical
CSA CEI/IEC 61000.4.4B : 2003	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 1643 : DRAFT 2012	VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
I.S. EN 62343-2:2014	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
I.S. EN 60335-1:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 61513 : 2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
BS EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
11/30217192 DC : 0	BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
12/30159217 DC : 0	BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
04/30095958 DC : DRAFT DEC 2004	ISO 19292 - SHIPS AND MARINE TECHNOLOGY - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
07/30165539 DC : 0
BIS IS/IEC 60947-4-2 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 2: AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
DIN EN 60580:2001-12	MEDICAL ELECTRICAL EQUIPMENT - DOSE AREA PRODUCT METERS
BS 5724-2.124(1998) : 1998	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
IEC 61800-5-2 REDLINE : 2ED 2016	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
UNE-EN 60947-5-3:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 50165 : 1997	ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS
BS EN 1434-4 : 2015	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
CSA C828 : 2013	PERFORMANCE REQUIREMENTS FOR THERMOSTATS USED WITH INDIVIDUAL ROOM ELECTRIC SPACE HEATING DEVICES
OIML R 140 : 2007	MEASURING SYSTEMS FOR GASEOUS FUEL
I.S. EN 55020:2007	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006)
BS EN 61869-6 : 2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
CEI 13-32 : 2000	WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
CEI EN 62282-3-201 : 2014	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
IEC 62026-7 : 1.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
14/30298051 DC : 0	BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
11/30250199 DC : 0	BS EN 60974-10 - ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
BS EN 60947-4-1 : 2010	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
NF EN 60947-5-9 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
NF EN 60947-3 : 2009 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
BS EN 60870-2-1 : 1996	TELECONTROL EQUIPMENT AND SYSTEMS - OPERATING CONDITIONS - PART 2-1: POWER SUPPLY AND ELECTROMAGNETIC COMPATIBILITY
NF EN 61131-6 : 2013	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
NF EN 50557 : 2012	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
BS EN 61851-21-1 : 2017	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
11/30245877 DC : 0	BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING
12/30266709 DC : 0	BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
BIS IS/IEC 60947-3 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS
CSA IEC 61000-6-2 : 2008	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
DIN EN ISO 13856-3:2013-12	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
03/309760 DC : DRAFT JUNE 2003	IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
BS EN 61674 : 2013	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
BS IEC 62003 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - REQUIREMENTS FOR ELECTROMAGNETIC COMPATIBILITY TESTING
17/30352682 DC : 0	BS IEC 60268-4 ED6.0 - SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
IEC TS 62257-3 : 2.0	RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
09/30176792 DC : 0	BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
CEI EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
BS EN 60945 : 2002	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
CSA IEC 61000-6-2 : 2008 : R2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
04/30031093 DC : DRAFT FEB 2004	ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
07/30170091 DC : DRAFT AUG 2007	BS ISO 22200 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
BS EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
PREN 14908-2 : DRAFT 2012	OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 2: TWISTED PAIR COMMUNICATION
BS IEC 60092-504 : 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
CEI EN 60044-8 : 2004	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
I.S. EN 60846:2004	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
NF EN 61000-4-1 : 2007
TR 134 926 : 13.0.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ELECTROMAGNETIC COMPATIBILITY (EMC); TABLE OF INTERNATIONAL REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TR 34.926 VERSION 14.0.0 RELEASE 14)
BS EN 60255-26 : 2013	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
08/30190185 DC : DRAFT SEP 2008	BS EN 60947-4-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
13/30281011 DC : 0	BS EN 61000-6-5 ED.1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR POWER STATION AND SUBSTATION ENVIRONMENTS
UNI EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
NF EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
12/30244783 DC : 0	BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 62244 : 2011	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
ISO 11614 : 1999(R2015)	RECIPROCATING INTERNAL COMBUSTION COMPRESSION-IGNITION ENGINES - APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOR DETERMINATION OF THE LIGHT ABSORPTION COEFFICIENT OF EXHAUST GAS
03/318812 DC : DRAFT NOV 2003	IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
UNI EN 1300 : 2014	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS ISO 16437 : 2012	SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS FOR SHIPS
11/30241337 DC : DRAFT JAN 2011	BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
IEEE C62.42 : 2005	APPLICATION OF COMPONENT SURGE-PROTECTIVE DEVICES FOR USE IN LOW-VOLTAGE [EQUAL TO OR LESS THAN 1000 V (AC) OR 1200 V (DC)] CIRCUITS
14/30284930 DC : 0	BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS
13/30289289 DC : 0	BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
11/30236311 DC : 0	BS ISO 7240-10 - FIRE DETECTION AND ALARM SYSTEMS - PART 10: POINT-TYPE FLAME DETECTORS
NBR IEC 61851-21 : 2013	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELETRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C SUPPLY
BS EN 60601-1-2 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS AND TESTS
BS IEC 60325 : 2002	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
BS EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
CEI EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
DIN EN ISO 13856-3 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
11/30255400 DC : 0	BS EN 50293 - ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS
10/30189547 DC : 0	BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
BS EN 13757-2 : 2004	COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER
IEC TS 61000-5-8 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-8: INSTALLATION AND MITIGATION GUIDELINES - HEMP PROTECTION METHODS FOR THE DISTRIBUTED INFRASTRUCTURE
14/30279327 DC : 0	BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
I.S. EN 62080:2009	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 60761-1:2004	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
03/111744 DC : DRAFT JULY 2003
00/716717 DC : DRAFT NOV 2000
BS PD IEC TR 60601-4-2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
01/204707 DC : DRAFT JUL 2001	IEC 61000-6-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
BS EN 62022 : 2007	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
BS EN 60974-10 : 2014	ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
OIML R 139-1 : 2014	COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
00/715261 DC : DRAFT DEC 2000	IEC 60325 - ALPHA, BETA AND ALPHA-BETA CONTAMINATION METERS AND MONITORS
CEI EN 62026-7 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
IEC 61017 : 1ED 2016	RADIATION PROTECTION INSTRUMENTATION TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
BS EN 61786-1 : 2014	MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
03/100499 DC : DRAFT JUNE 2003	IEC 60947-6-1 AMD 3. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - AUTOMATIC TRANSFER SWITCHING EQUIPMENT
13/30293221 DC : 0	BS EN 61083-1 - INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 1: REQUIREMENTS FOR HARDWARE FOR IMPULSE TESTS - "PROPOSED HORIZONTAL STANDARD
14/30318354 DC : 0	BS EN 61326-3-2 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
NBR IEC 62080 : 2011	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
BS EN 61131-9 : 2013	PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI)
BS EN 60947-6-2 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
BS EN 60947-4-2 : 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
CEI EN 61514 : 2002	INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
CEI EN 62026-1 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
13/30285924 DC : 0	BS EN 61000-4-24 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-24: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP CONDUCTED DISTURBANCE
CEI EN 62244 : 2012	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
BS EN 61000-1-2 : 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
13/30285941 DC : 0	BS EN 62041 - SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
PREN 50121-4 : DRAFT 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
NF EN 50121-4 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
BS IEC 60951-1 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING FOR ACCIDENT AND POST-ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN 55104:1996	ELECTROMAGNETIC COMPATIBILITY IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS PRODUCT FAMILY STANDARD
BS PD CLC/TR 50669 : 2017	INVESTIGATION RESULTS ON ELECTROMAGNETIC INTERFERENCE IN THE FREQUENCY RANGE BELOW 150 KHZ
BS EN 60268-4 : 2014	SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
02/204266 DC : DRAFT MAR 2002	IEC 61000-1-5 TR. ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-5: GENERAL - HIGH POWER ELECTROMAGNETIC (HPEM) EFFECTS ON CIVIL SYSTEMS
I.S. EN 62026-2:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD))
BS EN 62488-1 : 2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
UNE EN 50490 : 2010	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
BIS IS 12552 : 2012	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
BS IEC 60747-14-4 : 2011	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12	ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
BS EN ISO 4064-2 : 2017	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
CEI EN 60044-7 : 2001	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
03/100589 DC : DRAFT JULY 2003	IEC 60947-3 AMD 2. ED 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
16/30340740 DC : 0	BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
12/30267815 DC : 0	BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
IEC 61326-3-2 : 2.0	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
NF EN 62841-1 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 61000-6-2 : 2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
I.S. EN 62282-3-201:2017	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
13/30252780 DC : 0	BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS EN 62083 : 2009	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
12/30250727 DC : 0	BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
DD IEC TS 62257-3 : DRAFT 2004	RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
I.S. EN 50065-2-3:2003	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS
CEI EN 61000-4-4 : 2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
DIN EN 14846 : 2015	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION
CEI CLC/TR 50450 : 2006	RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S)
IEC 62236-4 REDLINE : 3ED 2018	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
08/30195242 DC : 0	BS EN 62599-2 IEC 62599 - ALARM SYSTEMS - GENERAL REQUIREMENTS - PART 2 - ELECTRO-MAGNETIC COMPATIBILITY
I.S. EN 230:2005	AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS
11/30245183 DC : 0	BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY
BS IEC 61559-1 : 2009	RADIATION PROTECTION INSTRUMENTATION IN NUCLEAR FACILITIES - CENTRALIZED SYSTEMS FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY - PART 1: GENERAL REQUIREMENTS
EN 62689-1 : 2016	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS (IEC 62689-1:2016)
BS EN 12405-3 : 2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
AAMI IEC 60601-1-2 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
BS EN 60044-7 : 2000	INSTRUMENT TRANSFORMERS - PART 7 - ELECTRONIC VOLTAGE TRANSFORMERS
IEEE 1909.1 : 2014	RECOMMENDED PRACTICE FOR SMART GRID COMMUNICATIONS EQUIPMENT - TEST METHODS AND INSTALLATION REQUIREMENTS
DD IEC PAS 62026-7 : DRAFT 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
BS IEC 61017 : 2016	RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
12/30241725 DC : 0	BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY
09/30200143 DC : 0	BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
BIS IS/IEC 60947-5-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
08/30181498 DC : DRAFT APR 2008	BS EN 61000-5-8 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-8: INSTALLATION AND MITIGATION GUIDELINES - HEMP PROTECTION METHODS FOR THE DISTRIBUTED INFRASTRUCTURE
11/30213789 DC : 0	BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
02/208921 DC : DRAFT AUG 2002	IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS EN 61000-4-25 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
BS ISO 19292 : 2014	SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
BS ISO 28057 : 2014	DOSIMETRY WITH SOLID THERMOLUMINESCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY
BS EN 62026-7 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
08/30168258 DC : 0	BS IEC 62534 - RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
07/30167174 DC : 0	BS EN 61869-2 - INSTRUMENT TRANSFORMERS - PART 2: SPECIFIC REQUIREMENT FOR CURRENT TRANSFORMERS
DIN EN ISO 13856-1:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
UNI EN 14846 : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 13856-1:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
EN 61851-21-1 : 2017 COR 2017	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
BS EN 60694 : 1997	COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
OIML R 50-1 : 2014	CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
NF EN 61000-6-2 : 2006	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
BS EN 61000-4-4 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
BS EN 61514 : 2002	INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONS WITH PNEUMATIC OUTPUTS
CEI EN 61131-6 : 2013	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS (IEC/TS 62603-1:2014)
BS EN 61131-6 : 2012	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
I.S. EN 61326-3-1:2017	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
NF EN 50136-2-1 : 98 AMD 1 2002	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS
CSA C61000-6-1 : 2009(R2018)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
BS EN 61676 : 2002	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY
CSA IEC 61000-6-2 : 2008 : R2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
14/30298973 DC : 0	BS EN 60051-1 - DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
11/30239643 DC : 0	BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
BS ISO/IEC 14709-1 : 1997
BS EN 60255-22-4 : 2008	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
OIML R 99-1 & 2 : 2008	INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
11/30229935 DC : 0	BS EN 62671 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - SELECTION AND USE OF INDUSTRIAL DIGITAL DEVICES OF LIMITED FUNCTIONALITY
I.S. EN ISO 16090-1:2018	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
ISO/IEC 14575 : 2000(R2018)	INFORMATION TECHNOLOGY - MICROPROCESSOR SYSTEMS - HETEROGENEOUS INTERCONNECT (HIC) (LOW-COST, LOW-LATENCY SCALABLE SERIAL INTERCONNECT FOR PARALLEL SYSTEM CONSTRUCTION)
CEI EN 60325 : 2005	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
10/30217314 DC : 0	BS EN 298 - AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS
BS IEC 60861 : 2006	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
IEC 61326-1 REDLINE : 2.0	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN 50370-2 : 2003
CSA CEI/IEC 61000.4.15 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 15: FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
BS IEC 61000-4-36 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-36: TESTING AND MEASUREMENT TECHNIQUES - IEMI IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
08/30195483 DC : 0	BS EN 61812-1 - TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
OIML R 117-1 : 2007	DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
TS 136 113 : 13.0.0	LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 36.113 VERSION 14.2.0 RELEASE 14)
10/30219053 DC : 0	BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
BS EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION
13/30252777 DC : 0	BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
EN 61851-21 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C. SUPPLY
UNI CEI EN ISO 4064-2 : 2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
NF EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
16/30338981 DC : 0	BS EN 60934 - CIRCUIT-BREAKERS FOR EQUIPMENT (CBE)
BS EN 50325-2 : 2001	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 2: DEVICENET
UNI EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 50491-5-3 : 2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-3: EMC REQUIREMENTS FOR HBES/BACS USED IN INDUSTRY ENVIRONMENT
DD IEC TS 62091 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS
BS IEC 61513 : 2011	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
16/30340737 DC : 0	BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
05/30133337 DC : DRAFT MAY 2005	IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK
15/30271483 DC : 0	BS EN 61851-21-1 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 21-1 ELECTRIC VEHICLE ONBOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO A.C./D.C. SUPPLY
BS EN 55103-2 : 2009	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY
CEI EN 61869-6 : 1ED 2017	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
BS EN 61000-4-5 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST
12/30265786 DC : 0	BS EN 14908-2 - OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 2: TWISTED PAIR COMMUNICATION
14/30291768 DC : 0	BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
10/30235503 DC : 0	BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 50065-2-2:2003	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
BS ISO 11614 : 1999	RECIPROCATING INTERNAL COMBUSTION COMPRESSION-IGNITION ENGINES - APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOR DETERMINATION OF THE LIGHT ABSORPTION COEFFICIENT OF EXHAUST GAS
08/30170297 DC : DRAFT MAR 2008	BS EN 62083 - MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
14/30302089 DC : 0	BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
13/30294866 DC : 0	BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
DIN ISO 16000-29 E : 2015	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014)
15/30265353 DC : 0	BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
BS EN 61850-3 : 2014	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
BS EN 62135-2 : 2015	RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
97/207802 DC : DRAFT JUL 1997	IEC 62026-6 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6: SERIAL MULTIPLEXED CONTROL BUS (SMCB)
14/30297218 DC : 0	BS EN 61000-6-1 ED.3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
VDI/VDE 2185-1 : 2007	RADIO BASED COMMUNICATION IN INDUSTRIAL AUTOMATION
15/30324675 DC : 0	BS CISPR 35 ED1.0 - ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
13/30280680 DC : 0	BS EN 60947-3:2009+A1:2012+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
BS EN 50065-2-1 : 2003	SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS
97/209093 DC : 0
BS EN 60947-8 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES
NF EN 62026-3 : 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET
NF EN 50121-5 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
NF EN 61326 : 97 AMD 3 2004	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - GENERAL REQUIREMENTS
BS EN 62689-1 : 2016	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
NF EN 62041 : 2011	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
17/30370691 DC : 0	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
DD IEC TS 61000-1-2 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
07/30163348 DC : 0	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
06/30148723 DC : DRAFT APR 2006	IEC 62026-3 ED.2.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (C DIS) - PART 3: DEVICENET
BS EN 62115 : 2005	ELECTRIC TOYS - SAFETY
NBR 15415 : 2006	MEASUREMENT METHODS AND REFERENCE LEVELS FOR EXPOSURE TO 50 HZ AND 60 HZ ELECTRIC AND MAGNETIC FIELDS
BS IEC 62534 : 2010	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
11/30242273 DC : 0	BS EN 61786-1 - MEASUREMENT OF DC MAGNETIC FIELDS, AC MAGNETIC AND ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: SPECIAL REQUIREMENTS FOR INSTRUMENTS
I.S. EN 61326-3-2:2008	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
CEI EN 62052-21 : 2005	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
I.S. EN 61000-6-1:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
CEI EN 61547 : 2010	EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
BS PD CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
08/30190191 DC : DRAFT SEP 2008	BS EN 60947-4-3 AMD2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
CEI EN 61326-3-2 : 2011	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
CEI EN 62343-2 : 2015	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
BS EN 60947-5-3 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
DIN 16086:2006-01	ELECTRICAL PRESSURE MEASURING INSTRUMENTS - PRESSURE TRANSMITTERS, PRESSURE MEASURING INSTRUMENTS - CONCEPTS, SPECIFICATIONS ON DATA SHEETS
16/30338578 DC : 0	BS EN 13757-2 - COMMUNICATION SYSTEMS FOR METERS - PART 2: WIRED M-BUS COMMUNICATION
04/30113789 DC : DRAFT MAY 2004	EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
07/30167396 DC : 0	BS EN 61869-4 - INSTRUMENT TRANSFORMERS - PART 4 - SPECIFIC REQUIREMENT FOR COMBINED TRANSFORMERS
NF EN 60770-1 : 2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
13/30260741 DC : 0	BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 62920 : 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT (IEC 62920:2017)
NF EN 60947-5-1 : 2004 AMD 1 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
BS EN 61757-1 : 2012	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
BS PD CEN ISO/TS 14907-1 : 2015	ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES
BS EN 50412-2-1 : 2005	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
ISO 16090-1 : 2017	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
12/30268049 DC : 0	BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
08/30185354 DC : DRAFT JULY 2008
16/30339801 DC : 0	BS EN 63052 - POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICES FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
16/30269922 DC : 0	BS EN 61851-21-2 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: EMC REQUIRMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS
BS EN 62343-2 : 2014	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
IEC TR 60601-4-2 : 1ED 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
BS EN 62215-3 : 2013	INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
BS EN 61038 : 1993	ELECTRICITY METERING - TARIFF AND LOAD CONTROLS - PARTICULAR REQUIREMENTS FOR TIME SWITCHES
08/30163012 DC : DRAFT FEB 2008	BS ISO 7176-21 - WHEELCHAIRS - PART 21: REQUIREMENTS AND TEST METHODS FOR ELECTROMAGNETIC COMPATIBILITY OF ELECTRICALLY POWERED WHEELCHAIRS AND SCOOTERS, AND BATTERY CHANGES
10/30216020 DC : 0
09/30193787 DC : 0	BS EN 62026-7 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
IEC 61851-22 : 1.0	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
BS EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
IEC TR 61000-5-6 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-6: INSTALLATION AND MITIGATION GUIDELINES - MITIGATION OF EXTERNAL EM INFLUENCES
S.R. CLC/TS 62603-1:2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
18/30368636 DC : 0	BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
DD IEC TS 62215-2 : 2007	INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: SYNCHRONOUS TRANSIENT INJECTION METHOD
CEI EN 62041 : 2012	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
16/30340734 DC : 0	BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
04/30121678 DC : DRAFT AUG 2004
10/30238943 DC : 0	BS EN 61000-6-7 ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL ENVIRONMENTS
CEI EN 61513 : 2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS
CEI EN 60947-5-9 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
CEI EN 61083-1 : 2002	INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENTS IN HIGH-VOLTAGE IMPULSE TESTS PART 1: REQUIREMENTS FOR INSTRUMENTS
13/30280815 DC : 0	BS EN 62343-2 - DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS PD IEC TR 61850-90-4 : 2013	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 90-4: NETWORK ENGINEERING GUIDELINES
BS IEC 60768 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - EQUIPMENT FOR CONTINUOUS IN-LINE OR ON-LINE MONITORING OF RADIOACTIVITY IN PROCESS STREAMS FOR NORMAL AND INCIDENT CONDITIONS
14/30318350 DC : 0	BS EN 61326-3-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
11/30254162 DC : 0	BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
NF EN 60947 6-1 : 2006 AMD 1 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT
UNE EN 50293 : 2013	ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY
97/207799 DC : DRAFT JUL 1997	IEC 62026-3 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: DEVICE NETWORK (DN)
UNE-EN 61000-4-4:2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
03/306274 DC : 0
CEI EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 61036 : 1997	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
I.S. EN 50270:2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS IEC 61000-6-6 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
I.S. EN 61000-6-5:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
BS ISO/IEC 18046-2 : 2011	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
09/30214220 DC : 0	BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
07/30173734 DC : 0	BS EN 55024 - INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
98/262470 DC : DRAFT JUL 1998	IEC 61987 ED. 1 - TERMS AND STRUCTURES OF MEASURING EQUIPMENT
BS EN 61000-6-5 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
CEI EN 50325-3 : 2002	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS)
00/243920 DC : DRAFT AUG 2000	CISPR 20. ED. 5. SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
14/30269850 DC : 0	BS EN 62135-2 - ED 2.0 - RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
ANSI N42.44 : 2008	PERFORMANCE OF CHECKPOINT CABINET X-RAY IMAGING SECURITY SYSTEMS
CEI EN 60601-1-2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
10/30193516 DC : 0	BS EN 60947-5-2:2007+A1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
DIN EN 14846 E : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
TR 102 615 : 1.1.1	POWERLINE TELECOMMUNICATIONS (PLT); PLUGTESTS[TM] 2007 ON COEXISTENCE BETWEEN PLT MODEM SYSTEMS; TEST CASES
07/30126760 DC : 0	IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY
97/207801 DC : DRAFT JUL 1997	IEC 62026-5 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: SMART DISTRIBUTED SYSTEM (SDS)
BS EN 61326-1 : 2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN 62387-1 : 2012	RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007, MODIFIED)
ANSI N42.55 : 2013	PERFORMANCE OF PORTABLE TRANSMISSION X-RAY SYSTEMS FOR USE IN IMPROVISED EXPLOSIVE DEVICE AND HAZARDOUS DEVICE IDENTIFICATION
CEI EN 62606 : 2014	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
00/560888 DC : APR 2000	IEC 60601-1-2 EDITION 2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS AND TESTS
BS EN 62310-2 : 2007	STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
IEC TS 62091 : 1ED 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS
06/30150482 DC : DRAFT MAY 2006	IEC CISPR 14-2 AMD 2 - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD
BS EN 50557 : 2011	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
BS ISO 17089-1 : 2019	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
I.S. EN 50490:2008	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
CEI 18-67 : 2013	ELECTRICAL INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY - OPTIMISING OF CABLE INSTALLATIONS ON SHIPS - TESTING METHOD OF ROUTING DISTANCE
CEI 18-54 : 2003	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION
ISO 16437 : 2012(R2018)	SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS FOR SHIPS
BS EN 61204-3 : 2001	LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
DIN ISO 16000-29:2015-02	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014)
02/205627 DC : DRAFT APR 2002	IEC 60747-14-4. ED.1.0 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
12/30262731 DC : 0	BS ISO 16000-29 - INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS
BS PD IEC TS 62257-3 : 2015	RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
07/30165742 DC : 0	BS EN 60947-4-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
OIML R 137-1 : 2006	GAS METERS - PART 1: REQUIREMENTS
UNE EN 55103-2 : 2010	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY
CEI EN 61812-1 : 2012	TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
04/30124466 DC : DRAFT OCT 2004	EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
OIML R 129 : 2000	MULTI-DIMENSIONAL MEASURING INSTRUMENTS
09/30202799 DC : 0	BS EN 1300:2004/A1 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
11/30213786 DC : 0	BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
BS EN 60325 : 2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
PREN 50121-5 : DRAFT 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS EN 50491-5-2 : 2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
17/30370039 DC : 0	BS IEC 62026-1 ED.3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
BS PD IEC TS 61000-5-10 : 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-10: INSTALLATION AND MITIGATION GUIDELINES - GUIDANCE ON THE PROTECTION OF FACILITIES AGAINST HEMP AND IEMI
BS PD IEC TR 61000-5-6 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-6: INSTALLATION AND MITIGATION GUIDELINES - MITIGATION OF EXTERNAL EM INFLUENCES
NF EN 61204-3 : 2001	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
03/112283 DC : DRAFT AUG 2003	EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
NF EN 55024 : 2011 AMD 1 2015	INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
NF EN 62040-2 : 2006
04/30116077 DC : DRAFT JUL 2004
06/30119052 DC : DRAFT MAR 2006	IEC 62387 - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING FOR EXTERNAL PHOTON AND BETA RADIATION USING ELECTRONIC DEVICES FOR THE DATA EVALUATION - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS ON DOSIMETRY SYSTEMS
BS ISO 17089-1 : 2010	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
NF EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
CSA E61496.1 :2004	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
11/30244681 DC : 0	BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
07/30165226 DC : 0	BS EN 60255-22-4 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
BS IEC 60532 : 2010	RADIATION PROTECTION INSTRUMENTATION - INSTALLED DOSE RATE METERS, WARNING ASSEMBLIES AND MONITORS - X AND GAMMA RADIATION OF ENERGY BETWEEN 50 KEV AND 7 MEV
12/30265715 DC : 0	BS EN 14-2/A3 ED1 - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - TECHNICAL AND EDITORIAL REVIEW
CEI EN 62488-2 : 1ED 2018	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
02/709474 DC : DRAFT JULY 2002	BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
EN 61326-1 : 2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012)
BS EN 50491-5-1 : 2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP
BS EN 60846 : 2004	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
10/30216008 DC : 0	BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60770-1:2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
NEMA C12.30 TR : 2013	TEST REQUIREMENTS FOR: METERING DEVICES EQUIPPED WITH SERVICE SWITCHES
OIML R 146-1 : 2016	PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 60580 : 2000	DOSE AREA PRODUCT METERS
98/704428 DC : DRAFT FEB 1998	ISO/CD 16100 - AUTOMATIC INTEGRATED ENVIRONMENTAL CONTROL SYSTEMS
15/30328943 DC : 0	BS EN 63024 ED1.0 - REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARD[S]) FOR CIRCUIT BREAKERS- RCBO[S],RCCB[S] FOR HOUSEHOLD AND SIMILAR USES
17/30352734 DC : 0	BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
08/30157876 DC : 0
14/30309508 DC : 0	BS EN 61131-2 ED 4.0 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO - OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS IEC 62244 : 2006	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
13/30283500 DC : 0	BS EN 60533 ED 3.0 - ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY
BS EN 62041 : 2010	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
03/306957 DC : DRAFT APR 2003	BS IEC 62022 - DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
11/30207770 DC : 0	BS EN 61375-3-4 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN BUS - PART 3-4: ECN - ETHERNET CONSIST NETWORK
DIN EN 12405-3 E : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 61326-3-2 : 2008	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
NF EN 62080 : 2010 AMD 2 2015	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
10/30217545 DC : 0	BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
BS PD IEC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
NF EN 62215-3 : 2014	INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
07/30172925 DC : 0	BS IEC 60951-1 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEM FOR ACCIDENT AND POST ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
BS EN 61543 : 1996	RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
04/30067001 DC : DRAFT AUG 2004
05/30137514 DC : DRAFT AUG 2005	IEC 60747-14-4 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
BS EN 62282-3-201 : 2017	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
NBR IEC 60947-6-1 : 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT -TRANSFER SWITCHING EQUIPMENT
04/30112677 DC : 0	IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
17/30345890 DC : 0	BS ISO 23550 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - GENERAL REQUIREMENTS
BS EN 50463 : 2007	RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
03/100498 DC : DRAFT JUNE 2003	IEC 60947-5-3 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
NF EN 61543 : 96 AMD 2 2006	RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
13/30276231 DC : 0	BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
10/30227237 DC : 0	BS EN 62488-1 - PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS - PART 1: OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
BS EN 50325-3 : 2001	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS)
CSA C60044-7 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
OIML R 125 : 1998	MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS
OIML R 144-2 : 2013	INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
18/30368743 DC : DRAFT APR 2018	BS EN 60947-6-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
07/30150067 DC : 0	BS IEC 60846-1 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
01/200684 DC : DRAFT FEB 2001
DD CEN ISO/TS 14907-1 : 2010	ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2010)
OIML R 46-1 & 2 : 2012	ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
13/30252774 DC : 0	BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
IEC TR 62066 : 1.0	SURGE OVERVOLTAGES AND SURGE PROTECTION IN LOW-VOLTAGE A.C. POWER SYSTEMS - GENERAL BASIC INFORMATION
12/30238970 DC : 0	BS EN 60204-31 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
00/705404 DC : DRAFT FEB 2000
BS EN 61000-6-7 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
14/30269872 DC : 0	BS EN 61017 ED 1.0 - RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
BS PD IEC TR 62685 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
BS EN 50270 : 2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
15/30291884 DC : 0	BS EN 60947-5-1 AMD2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 50490 : 2008	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
11/30251478 DC : 0	BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
BS ISO 16000-29 : 2014	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS
BS EN 50293 : 2012	ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY
BS EN 62387 : 2016	RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION
10/30240055 DC : DRAFT DEC 2010	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
11/30244172 DC : 0	BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
05/30132835 DC : DRAFT APR 2005	IEC 60947-5-9 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
15/30302640 DC : 0	BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
BS EN 60947-5-9 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
NBR IEC 60079-29-1 : 2008	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
14/30292140 DC : 0	BS EN 62040-2 ED3.0 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (EMC)
NBR IEC 60669-2-1 : 2014	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
05/30137850 DC : DRAFT AUG 2005	IEC 62215-2 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: IMPULSE INJECTION METHOD
CEI EN 62083 : 2011	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
11/30242198 DC : 0	BS ISO 19292 - SHIPS AND MARINE TECHNOLOGY - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
CEI EN 50370-2 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY
NBR IEC 60439-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
BS EN 61800-5-2 : 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016)
14/30297223 DC : 0	BS EN 61000-6-2 ED -3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
BS EN 61547 : 2009
04/30031075 DC : DRAFT FEB 2004	ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
04/19986707 DC : 0	BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS
UNE-EN 50130-4:2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
DIN EN 50082-1 : 1997	ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC IMMUNITY STANDARD - PART 1: RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY
03/107915 DC : DRAFT MAY 2003	IEC 61000-6-2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
BS EN 61000-4-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
UNE EN 61786-1 : 2014	MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
PREN 12067-2 : DRAFT 2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - PART 2: FUEL/AIR RATIO CONTROL/SUPERVISION OF THE ELECTRONIC TYPE
BS EN 62534 : 2015	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
CSA C61000-4-30 : 2010	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
11/30243827 DC : 0	BS ISO 16437 - SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS
PREN 50293 : DRAFT 2011	ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS
BS EN 50325-1 : 2002	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 1: GENERAL REQUIREMENTS
16/30332623 DC : 0	BS EN 62920 ED 1.0 - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT APPLYING TO PHOTOVOLTAIC POWER GENERATING SYSTEMS
BS PD IEC TR 61000-1-5 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-5: GENERAL - HIGH POWER ELECTROMAGNETIC (HPEM) EFFECTS ON CIVIL SYSTEMS
00/202085 DC : DRAFT MAY 2000	IEC 60669-2-1. ED. 4 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATION - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
CEI EN 61851-22 : 2003	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
16/30328917 DC : DRAFT APR 2016	BS EN 62488-2 ED 1.0 - POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS (APLC)
UNE EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
03/314745 DC : DRAFT SEP 2003	ISO 11252 - LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION
MIL PRF 28800 : F	TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
BS EN 50130-4 : 2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
BS IEC 60533 : 2015	ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY (EMC) - SHIPS WITH A METALLIC HULL
04/30111859 DC : 0	IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
CEI EN 62689-1 : 1ED 2017	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
UNE EN ISO 4064-2 : 2015	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 60947-5-1 : 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (IEC 60947-5-1:2016 + COR1:2016)
AAMI ID26 : 2004	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
AAMI ID26 : 2004 : R2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
AAMI DF80 : 2003 : R2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
BS EN 50065-2-2 : 2003	SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
PREN 12405-3 : DRAFT 2013	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
03/108042 DC : DRAFT MAY 2003	IEC 61000-4-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES
07/30166127 DC : 0
NF EN 62026-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
CSA E61131.2 :2006	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
OIML R 76-1 : 2006	NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
PREN 50130-4 : DRAFT 2010	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
06/30157864 DC : 0	BS EN 60947-5-1 AMD 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
01/203790 DC : DRAFT JUNE 2001	IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC TR 61000-2-5 REDLINE : 3ED 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
NF EN 60255-22-4 : 2008	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
00/203618 DC : DRAFT AUG 2000	IEC 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
I.S. EN 60861:2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
BS EN 60761-1 : 2004	EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
03/306642 DC : DRAFT APR 2003	EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS
CEI EN 62052-11 : 2003	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
NF EN 60601-1-2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
07/30169926 DC : DRAFT AUG 2007	BS EN 50490 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
BS EN 50121-5 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS ISO 7176-21 : 2009	WHEELCHAIRS - PART 21: REQUIREMENTS AND TEST METHODS FOR ELECTROMAGNETIC COMPATIBILITY OF ELECTRICALLY POWERED WHEELCHAIRS AND SCOOTERS, AND BATTERY CHARGERS
NF EN 60325 : 2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
DD ENV 1300 : 1999	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
04/302050 DC : DRAFT JAN 2004	ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
NF EN 55035 : 2017	ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
09/30150998 DC : 0
DD IEC TS 61000-5-8 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-8: INSTALLATION AND MITIGATION GUIDELINES - HEMP PROTECTION METHODS FOR THE DISTRIBUTED INFRASTRUCTURE
CSA E61496.1 : 2004 : R2013	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 50082-2 : 2012	ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT
NBR NM-60335-1 : 2010	SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
CSA C61000-6-1 : 2009 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 63044-5-2 : 1ED 2017	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
AAMI DF80 : 2003	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
UNE-EN 61000-4-5:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST
AAMI ID26 : 2004 : R2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
UNE-EN 55024:2011	INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
BS EN 55024 : 2010	INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
04/30115154 DC : DRAFT JUN 2004	EN 50412-1 - IMMUNITY REQUIREMENTS FOR POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT
ISA 12.13.01 : 2003	PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
I.S. EN 62310-2:2007	STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
I.S. EN 61000-6-7:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
CSA ISO/IEC 18046-2 : 2013(R2017)	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
BS PD CLC/TR 50450 : 2006	RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S)
03/107918 DC : DRAFT MAY 2003	IEC 61000-4-1 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
I.S. EN 60669-2-5:2016	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
CEI EN 61000-6-2 : 2006	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
BS PD IEC TR 62066 : 2002	SURGE OVERVOLTAGES AND SURGE PROTECTION IN LOW-VOLTAGE A.C. POWER SYSTEMS - GENERAL BASIC INFORMATION
CEI EN 61526 : 2013	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
07/30165158 DC : 0
CEI EN 62488-1 : 2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
CEI EN 61757-1 : 2013	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
05/30136204 DC : DRAFT JUL 2005
NBR IEC 60947-5-1 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
OIML R 143 : 2009	INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS
OIML R 81 : 1998	DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
OIML R 85-1 & 2 : 2008	AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
04/30039291 DC : DRAFT NOV 2004
CEI EN 50557 : 2012	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
OIML R 137-1 & 2 : 2012 AMD 2014	GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
DIN EN 1434-4:2016-02	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
CSA E61131.2 : 2006 : R2016	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
BS EN 61779-1 : 2000	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
NF EN 55020 : 2007 AMD 12 2016	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
06/30145396 DC : DRAFT JAN 2006	IEC 62026-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
CSA C900.4 : 2013	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
I.S. EN 61204-3:2000	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
CEI EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
UNE EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
OIML R 139-2 : 2014	COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
BS EN 62040-2 : 2006	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 62040-2:2005)
NF EN 14846 : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
NF EN 62841-2-9 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR HAND-HELD TAPPERS AND THREADERS
00/716716 DC : DRAFT NOV 2000
UNE EN 61000-6-7 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
BS EN 61326 : 1998	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS
CSA C60044-7 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
ANSI Z83.21 : 2016	COMMERCIAL DISHWASHERS
NBR IEC 61000-4-30 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENTS TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
NBR IEC 61851-22 : 2013	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C ELECTRIC VEHICLE CHARGING STATION
I.S. EN 61326:1998
NF EN 50121-3-2 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
09/30193520 DC : 0	BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
IEC 60092-504 REDLINE : 4ED 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
EN 50121-5 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
NF EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
IEC 61204-3 REDLINE : 3ED 2016	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
S.R. CLC/TR 62685:2011	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
NF EN 60044-8 : 2006	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
I.S. EN 61000-4-18:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
BS EN 62026-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
EN IEC 61058-1 : 2018	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS (IEC 61058-1:2016)
I.S. EN 62606:2013	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
CEI EN 62040-2 : 2006	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
UNE EN 12405-3 : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CEI EN 50490 : 2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
CSA ISO/IEC 18046-2:2013	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
CEI EN 60945 : 2003	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
PREN 13757-2 : DRAFT 2016	COMMUNICATION SYSTEMS FOR METERS - PART 2: WIRED M-BUS COMMUNICATION
CSA C61000-6-1 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
DIN EN 12405-3:2016-04	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
EN 61439-1 : 2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
OIML R 134-1 : 2006	AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
I.S. EN 60044-8:2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEC 61851-21 : 1.0	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY
CSA C22.2 No. 199 :2007	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
UNE-EN 60947-6-1:2006	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT
CSA C61000-4-30 : 2010 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
NF EN 62022 : 2008	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
NF EN 60761-1 : 2005	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
UNE-EN 12405-1:2006	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
CAN/CSA-C22.2 NO No. 60947-4-1 : 2014(R2019)	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
CSA C60044-7 : 2007	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
CSA C22.2 No. 167 : 2017	HOUSEHOLD DISHWASHERS
NBR IEC 61058-1 : 2004	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
CISPR 35 : 1ED 2016	ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
CEI EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
TS 137 113 : 13.1.0	DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; E-UTRA, UTRA AND GSM/EDGE; MULTI-STANDARD RADIO (MSR) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.113 VERSION 14.2.0 RELEASE 14)
UNE-EN 60947-4-2:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
CSA C22.2 No. 199 : 2007 : R2011	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
BS EN 50136-2-1 : 1998	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT
UNE-EN 1300:2014	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
CEI CLC/TR 62685 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
CSA C60044-8 :2007	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
BS EN 62080 : 2009	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
NF EN 301843-1 : 2018	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR MARINE RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENT (V2.2.1)
CEI EN 61326-1 : 2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
NF EN 60947 6-2 : 2003 AMD 1 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
IEC 61526 : 3.0	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
ISO 3930 : 2000	INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS
IEC 62236-3-2 : 3.0	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
IEC 62236-5 REDLINE : 3ED 2018	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
CSA C60044-8 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CEI EN 61786-1 : 2014	MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
OIML R 60 ANNEXES : 2017	METROLOGICAL REGULATION FOR LOAD CELLS ANNEXES
IEC 61000-6-6 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
I.S. EN 60325:2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
IEC 61800-5-2 : 2.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
IEEE C37.100.1 : 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
BS EN 60044-8 : 2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
I.S. EN 61000-4-25:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV))
BIS IS 13947-5-2 : 2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SPECIFICATION - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 2: PROXIMITY SWITCHES
SAE J 2954 : 2017	WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
IEC 62026-2 : 2.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
CSA C60044-8 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
NBR 14520 : 2011	ELECTRONIC METERS OF ELECTRIC ENERGY - METHOD OF TEST
IEEE DRAFT C37.100.1 : D9 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
NBR 16367-4 : 2015	ACCESSORIES FOR POWER TRANSFORMERS AND REACTORS FOR POWER SYSTEMS IMMERSED IN AN INSULATING LIQUID - PART 4: DIGITAL MONITOR OIL AND WINDING TEMPERATURE
UNE-EN 50121-4:2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
CSA IEC 61000-4-18:2014(R2018)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
OIML R 144-1 : 2013	INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
I.S. EN 60947-5-9:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
I.S. EN 60947-6-2:2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
CEI EN 50491-5-1 : 2011	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP
NF EN 60255-26 : 2014	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
BS EN 55020 : 2007	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
NF EN 61779-1 : 2005 AMD 11 2005	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
SCTE 203 : 2014	PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS FACILITIES - TEST METHODS
IEC 61000-4-4:2012 RLV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
CEI EN 61850-3 : 2014	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
CEI EN 61800-5-2 : 2009	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
BS EN 61298-3 : 2008	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
API 17F REDLINE : 2006	SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS
NF ISO 3930 : 2001	INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS
TS 136 124 : 13.1.0	LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 36.124 VERSION 14.1.0 RELEASE 14)
BS EN 61526 : 2013	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
BS EN 61058-1 : 2002	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
PREN 45501 : DRAFT 2011	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN ISO 16090-1 : 2018	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
BS EN 60947-3 : 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
NF EN 50240 : 2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT STANDARD FOR RESISTANCE WELDING EQUIPMENT
NF EN 62052-11 : 2003 AMD 1 2017	ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
ISO 23551-1 : 2012