18/30359998 DC : 0
NA
NA
Status of Standard is Unknown
BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
6 Hydrogen supply safety and operation
7 Equipment and Components
8 Dispensers
9 Hydrogen quality
10 Electrical
11 Instrumentation and control system
12 Station Inspection and Tests
13 Operation
14 Technical documentation
15 Inspection and maintenance
Annex A (informative) - Safety methodologies
and risk assessment
Annex B (informative) - Further guidance on
risk management
Annex C (informative) - Hydrogen dispensing and
examples of fueling and communication
protocols, and corresponding verification testing
Annex D (informative) - Reference fueling limits of
hydrogen and fuel cell vehicles
Annex E (informative) - Pressure level terminology
and application to design verification
requirements for hydrogen dispensers and
compressed hydrogen storage systems
Annex F (informative) - Countermeasures for Unknown
Hydrogen Fueling Protocols
Annex G (informative) - Recommendations for,
and example of, vehicular impact protection
measures
Annex H (informative) - Example for leakage testing
of hydrogen fueling system
Annex I (informative) - Minimum Fueling Station
Acceptance Inspection, Testing and
Validation Checklist
Annex J (informative) - Hydrogen Station Testing
Apparatus (HSTA)
Annex K (informative) - Sampling Procedures and
Hardware for Hydrogen Fuel Quality
Analysis
Bibliography
BS ISO 19880-1.
| Committee |
PVE/3/8
|
| DocumentType |
Draft
|
| Pages |
182
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| EN 13480-6:2017 | Metallic industrial piping - Part 6: Additional requirements for buried piping |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| EN 13458-1:2002 | Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
| IEC 62308:2006 | Equipment reliability - Reliability assessment methods |
| ASTM D 7651 : 2010 | Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ISO 21010:2014 | Cryogenic vessels Gas/materials compatibility |
| ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61340-5-1:2016 | Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| ISO 14687-2:2012 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| IEC 62023:2011 | Structuring of technical information and documentation |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
| ISO 31000:2009 | Risk management Principles and guidelines |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| EN 13648-2:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
| OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| ASTM D 7650 : 2013 : REDLINE | Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| IEC 62027:2011 | Preparation of object lists, including parts lists |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| SAE J2600_201510 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices |
| SAE J2601_201612 | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
| ISO 12500-3:2009 | Filters for compressed air Test methods Part 3: Particulates |
| ISO 10628-1:2014 | Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| CEN/TR 13480-7:2017 | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| ISO 16964:2015 | Gas cylinders Flexible hoses assemblies Specification and testing |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| ISO 10628-2:2012 | Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols |
| IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| EN 13371:2001 | Cryogenic vessels - Couplings for cryogenic service |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| ISO 4022:1987 | Permeable sintered metal materials — Determination of fluid permeability |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| IEC 61069-7:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 24490:2016 | Cryogenic vessels Pumps for cryogenic service |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 13648-1:2008 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
| 2014/68/EU : 2014 COR 1 2015 | DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE |
| EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| SAE J2799_201404 | Hydrogen Surface Vehicle to Station Communications Hardware and Software |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
| ISO 26142:2010 | Hydrogen detection apparatus Stationary applications |
| ISO 17268:2012 | Gaseous hydrogen land vehicle refuelling connection devices |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| SAE J2601/2_201409 | Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ASTM D 7606 : 2011 | Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
| ISO 16573:2015 | Steel Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| ISO 3864:1984 | Safety colours and safety signs |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
| ISO 21012:2006 | Cryogenic vessels Hoses |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.