Preview

Pressure vessels

Available format(s)

Hardcopy , Hardcopy Looseleaf , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-07-2024

Superseded by

AS 1210-2010

Published date

05-07-1997

Publisher

Standards Australia

Preview

€185.53

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

This Standard sets out minimum requirements for the materials, design,manufacture, testing, inspection, certification and dispatch of fired and unfired pressurevessels constructed in ferrous or non-ferrous metals by welding, brazing, casting, forging,or cladding and lining and includes the application of non-integral fittings required forsafe and proper functioning of pressure vessels.

Committee	ME-001
DocumentType	Standard
ISBN	0 7337 1012 3
Pages	329
ProductNote	See also AS 1210 Supplement 1-1990 and AS 1210 Supplement 2-1999
PublisherName	Standards Australia
Status	Superseded
SupersededBy	AS 1210-2010
Supersedes	DR 95103 AS 1210-1989
UnderRevision	DR 06703

This Standard sets out minimum requirements for the materials, design, manufacture, testing, inspection, certification and despatch of fired and unfired pressure vessels constructed in ferrous or non-ferrous metals by welding, brazing, casting, forging, or cladding and lining and includes the application of non-integral fittings required for safe and proper functioning of pressure vessels. This Standard also specifies requirements for non-metallic vessels and metallic vessels with non-metallic linings.For detailed requirements for metallic materials, manufacture and testing, reference should be made to the relevant material Standards, and to AS 4458, AS 3992 and AS 4037.The requirements of this Standard have been formulated on the basis that the required examinations and inspection during manufacture are performed and that appropriate reasonable care is taken of the vessels during subsequent stages in the life of vessels including appropriate inspection for deterioration.

Originated in part as AS B31-1931 and AS CB1-1931.
Previous edition 1989.
Fifth edition 1997.
Reissued incorporating Amendment Nos. 1 (February 1998), 2 (September 1998) and 3 (April 2002).

AS 1391-2007	Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS 2291-2007	Metallic materials - Tensile testing at elevated temperatures
AS 1833-2002	Austenitic cast iron
AS 1111-1980	ISO metric hexagon commercial bolts and screws
AS 1594-1989
AS/NZS 2465:1999	Unified hexagon bolts, screws and nuts (UNC and UNF threads) (Reconfirmed 2016)
AS 3892-1995	Pressure equipment - Installation
AS 1831-2007	Ductile cast iron (Reconfirmed 2017)
AS 4087-1996	Metallic flanges for waterworks purposes
AS 1569-1998	Copper and copper alloys - Seamless tubes for heat exchangers (Reconfirmed 2020)
AS 1271-1997	Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
AS B148-1956	Unified black hexagon bolts, screws and nuts (UNC and UNF threads) and plain washers - Heavy series
AS 1358-1989	Bursting discs and bursting disc devices - Guide to application, selection, and installation
AS 3600-2001	Concrete structures
AS 2865-1995	Safe working in a confined space
AS 1170.2-1989	Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 1832-2007	Malleable cast iron (Reconfirmed 2017)
AS 2465-1981	Unified hexagon bolts, screws and nuts (UNC and UNF threads)
AS 1544.2-2003	Method for impact tests on metals Charpy V-notch (Reconfirmed 2017)
AS 1832-1985	Iron castings - Malleable cast iron
AS 3920.1-1993	Assurance of product quality Pressure equipment manufacture
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS 3142-1994	Approval and test specification - Electric water heaters
AS 1874-2000	Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018)
AS 2129-1994	Flanges for pipes, valves and fittings
AS/NZS 3788:1996	Pressure equipment - In-service inspection
AS 3600-1994	Concrete structures
AS/NZS 1594:2002	Hot-rolled steel flat products (Reconfirmed 2016)
AS 2809.1-1999	Road tank vehicles for dangerous goods - General requirements
AS 2809.6-1991	Road tank vehicles for dangerous goods - Tankers for cryogenic liquids
AS/NZS ISO 9001:1994	Quality systems - Model for quality assurance in design, development, production, installation and servicing
AS/NZS 1734:1997	Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
AS 1544.2-1989	Methods for impact tests on metals Charpy V-notch
AS/NZS 3711.6:1993	Freight containers Tank containers
AS 3990-1993	Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 3857-1999	Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016)
AS 2022-1983	Anhydrous ammonia - Storage and handling (known as the SAA Anhydrous Ammonia Code)
AS/NZS 1567:1997	Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 1425-1989	LP gas fuel systems for vehicle engines (known as the SAA Automotive LP Gas Code)
AS 1210 SUPP 1-1990
AS 2074-1982	Steel castings
AS 2528-1982	Bolts, studbolts and nuts for flanges and other high and low temperature applications
AS 1722.2-1992	Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 1796-1993	Certification of welders and welding supervisors
AS 3678-1990	Structural steel - Hot-rolled plates, floorplates and slabs
AS 1112-1980	ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts
AS/NZS 1200:1994	Pressure equipment
AS 1228-1997	Pressure equipment - Boilers
AS 4100-1990	Steel structures
AS 1722.1-1975	Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS/NZS 4331.2:1995	Metallic flanges Cast iron flanges (Reconfirmed 2020)
AS 2613-1989	Safety devices for gas cylinders
AS 1391-1991	Methods for tensile testing of metals
AS 4458-1997	Pressure equipment - Manufacture (Reconfirmed 2016)
AS 3509-1988	LP gas fuel vessels for automotive use
AS 2872-2000	Atmospheric heating of vessels containing fluids - Estimation of maximum temperature (Reconfirmed 2016)
AS/NZS 4360:2004	Risk management
AS/NZS 3509:2003	LP Gas fuel vessels for automotive use
AS 1170.4-1993	Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS 4041-2006	Pressure piping (Reconfirmed 2016)
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2613-2005	Safety devices for gas cylinders (Reconfirmed 2016)
AS/NZS 3500.4:2003	Plumbing and drainage Heated water services
AS/NZS 4331.3:1995	Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020)
AS 1170.4-2007	Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 1596-1989	LP Gas - Storage and handling
AS/NZS 2312:1994	Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1830-1986	Iron castings - Grey cast iron
AS/NZS 1865:1997	Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020)
AS 1663-1974	Method for dropweight test for nil-ductility transition temperature of ferritic steels
AS/NZS 1110:1995	ISO metric precision hexagon bolts and screws
AS 1721-1985	General purpose metric screw threads (Reconfirmed 2017)
AS 1252-1983	High strength steel bolts with associated nuts and washers for structural engineering
AS 3892-2001	Pressure equipment - Installation (Reconfirmed 2016)
AS/NZS 2865:2001	Safe working in a confined space
AS/NZS 2451:1998	Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)
AS 2971-1987	Serially produced pressure vessels
AS 3711.6-2000	Freight containers Tank containers (Reconfirmed 2016)
AS/NZS 4360:1999	Risk management
AS 1275-1985
AS 2809.4-2001	Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 1056.1-1991	Storage water heaters General requirements
AS 1831-1985	Iron castings - Spheroidal or nodular graphite cast iron
AS 1358-2004	Bursting discs and bursting disc devices - Application, selection and installation (Reconfirmed 2016)
AS 3873-2001	Pressure equipment - Operation and maintenance
AS 1442-1992	Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products
AS 2809.6-2001	Road tank vehicles for dangerous goods Tankers for cryogenic liquids
AS 4037-1999	Pressure equipment - Examination and testing (Reconfirmed 2016)
AS/NZS 1596:2002	The storage and handling of LP Gas
AS 1874-1988	Aluminium and aluminium alloys - Ingots and castings
AS 2074-2003	Cast steels
AS 1565-1996	Copper and copper alloys - Ingots and castings (Reconfirmed 2020)
AS/NZS 4331.1:1995	Metallic flanges Steel flanges (Reconfirmed 2020)
AS/NZS 1111:1996	ISO metric hexagon commercial bolts and screws
AS/NZS 3678:1996	Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 1112:1996	ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts
AS 4041-1998	Pressure piping
AS 3873-1995	Pressure equipment - Operation and maintenance
AS 1566-1997	Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
AS 1796-2001	Certification of welders and welding supervisors (Reconfirmed 2016)
AS 4343-2005	Pressure equipment - Hazard levels
AS 1271-2003	Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016)
AS 1548-1995	Steel plates for pressure equipment
AS 2971-2007	Serially produced pressure vessels (Reconfirmed 2017)
AS 1228-2006	Pressure equipment - Boilers
AS 3679.1-1990	Structural steel - Hot-rolled bars and sections
AS 1833-1986	Iron castings - Austenitic cast iron
AS 2291-1979	Methods for tensile testing of metals at elevated temperatures
AS 1734-1986	Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS 2872-1988	Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
AS 3992-1992	Boilers and pressure vessels - Welding and brazing qualification
AS 2634-1983	Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins
AS 2809.3-1999	Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases
AS 4100-1998	Steel structures (Reconfirmed 2016)
AS/NZS 1170.2:2002	Structural design actions Wind actions
AS 4087-2004	Metallic flanges for waterworks purposes
AS 3597-1993	Structural and pressure vessel steel - Quenched and tempered plate
AS 1349-1986	Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 2812-2005	Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018)
AS/NZS 3992:1998	Pressure equipment - Welding and brazing qualification
AS 1442-2007	Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS 2129-2000	Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 2812-1985	Welding, brazing and cutting of metals - Glossary of terms
AS 1567-1985	Copper and copper alloys - Wrought rods, bars and sections
AS 2451-1981	Bolts, screws and nuts with British standard Whitworth threads (Rationalized Series)
AS 1074-1989	Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 1830-2007	Grey cast iron (Reconfirmed 2017)
AS/NZS 1252:1996	High-strength steel bolts with associated nuts and washers for structural engineering
AS 3500.4-1994	National Plumbing and Drainage Code Hot water supply systems
AS/NZS 1200:2000	Pressure equipment
AS 3653-1993	Boilers - Safety, management, combustion and other ancillary equipment
AS 2809.4-1986	Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS/NZS 1425:2007	LP Gas fuel systems for vehicle engines
AS/NZS 3788:2006	Pressure equipment - In-service inspection (Reconfirmed 2017)
AS/NZS 2022:2003	Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS 1865-1986	Aluminium and aluminium alloys - Drawn wire, rod, bar and strip

AS 3860-1991	Fixed guideway people movers
AS 1988.1-2006	Welding of ferrous castings - Steel castings
AS/NZS 1715:2009	Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024)
AS/NZS 1596:2002	The storage and handling of LP Gas
AS 2470-2005	Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016)
AS 2885.2-2002	Pipelines - Gas and liquid petroleum - Welding
AS 2896-1998	Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS/NZS 2243.6:2010	Safety in laboratories Plant and equipment aspects
AS 1470-1986	Health and safety at work - Principles and practices
AS/NZS 4645.2:2008	Gas distribution networks Steel pipe systems
AS/NZS 3992:1998	Pressure equipment - Welding and brazing qualification
AS 2593-2004	Boilers - Safety management and supervision systems (Reconfirmed 2016)
AS 3892-2001	Pressure equipment - Installation (Reconfirmed 2016)
AS 5601-2004	Gas installations
AS/NZS 3509:2003	LP Gas fuel vessels for automotive use
AS 4326-2008	The storage and handling of oxidizing agents
AS/NZS 4645.3:2008	Gas distribution networks Plastics pipe systems
AS 3597-1993	Structural and pressure vessel steel - Quenched and tempered plate
AS 1410-2003	Sterilizers - Steam - Pre-vacuum
AS 1163-1991	Structural steel hollow sections
AS 1349-1986	Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 2885.0-2008	Pipelines - Gas and liquid petroleum General requirements
AS 3961-2005	The storage and handling of liquefied natural gas
AS 3780-1994	The storage and handling of corrosive substances
AS/NZS 1554.4:2004	Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 2739:2009	Natural gas (NG) fuel systems for vehicle engines
AS 1219-1994	Power presses - Safety requirements
AS 1796-2001	Certification of welders and welding supervisors (Reconfirmed 2016)
AS/NZS 4692.1:2005	Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016)
AS 2941-2002	Fixed fire protection installations - Pumpset systems
AS 2809.6-2001	Road tank vehicles for dangerous goods Tankers for cryogenic liquids
AS 1735.3-2002	Lifts, escalators and moving walks Passenger and goods lifts - Electrohydraulic
AS 2865-2009	Confined spaces
AS 1692-2006	Steel tanks for flammable and combustible liquids (Reconfirmed 2016)
AS 1697-2005	Installation and maintenance of steel pipe systems for gas
AS 4728-2005	Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016)
AS/NZS 2299.1:2007	Occupational diving operations Standard operational practice
AS 4211.3-1996	Gas recovery or combined recovery and recycling equipment Fluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems
AS 3689.1-1989	Automatic fire extinguishing systems using halogenated hydrocarbons Halon 1301 total flooding systems
AS 1894-1997	The storage and handling of non-flammable cryogenic and refrigerated liquids (Reconfirmed 2021)
AS 1228-2006	Pressure equipment - Boilers
AS 1485-1983	Safety and health in workrooms of educational establishments
AS 2809.5-2001	Road tank vehicles for dangerous goods Tankers for bitumen-based products
AS 2809.2-1999	Road tank vehicles for dangerous goods - Tankers for flammable liquids
AS 1418.1-2002	Cranes, hoists and winches General requirements
AS 1940-2004	The storage and handling of flammable and combustible liquids
AS 5100.6-2004	Bridge design Steel and composite construction
AS/NZS 4645.1:2008	Gas distribution networks Network management
AS 1418.15-1994	Cranes (including hoists and winches) - Concrete placing equipment
AS 2809.3-2008	Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gases
AS 4326-1995	The storage and handling of oxidizing agents
AS/NZS 1715:1994	Selection, use and maintenance of respiratory protective devices
AS 2872-2000	Atmospheric heating of vessels containing fluids - Estimation of maximum temperature (Reconfirmed 2016)
AS 2067-1984	Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV
AS/NZS 2022:2003	Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
HB 213:2003	Guidelines for safe working in a confined space
AS 2941-2008	Fixed fire protection installations - Pumpset systems
AS 1418.8-2008	Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018)
AS/NZS 2299.2:2002	Occupational diving operations Scientific diving
AS 3577-2006	Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 2661-1983	Vapour degreasing plant - Design, installation and operation - Safety requirements
AS 2746-2008	Working areas for gas-fuelled vehicles
AS 4100-1998	Steel structures (Reconfirmed 2016)
AS 2182-1998	Sterilizers - Steam - Benchtop
AS 2885.2-2007	Pipelines - Gas and liquid petroleum Welding
AS/NZS 4673:2001	Cold-formed stainless steel structures
AS 4795-2002	Double-flanged butterfly valves for waterworks purposes
AS 2067-2008	Substations and high voltage installations exceeding 1 kV a.c.
AS 4774.1-2003	Work in compressed air and hyperbaric facilities Work in tunnels, shafts and caissons
AS 4037-1999	Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 2809.4-2001	Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 3780-2008	The storage and handling of corrosive substances
AS 2243.6-1990	Safety in laboratories - Mechanical aspects
AS/NZS 2243.1:2005	Safety in laboratories Planning and operational aspects
AS 2192-2002	Sterilizers - Steam - Downward-displacement
AS/NZS 2865:2001	Safe working in a confined space
AS 2885.1-2007	Pipelines - Gas and liquid petroleum Design and construction
AS/NZS 1554.6:1994	Structural steel welding - Welding stainless steels for structural purposes
AS 2809.2-2008	Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS 4211.1-1996	Gas recovery or combined recovery and recycling equipment Fluorocarbon refrigerants from automotive airconditioning systems
AS 1735.3-2001	Lifts, escalators and moving walks Passenger and goods lifts - Electrohydraulic
AS/NZS 4681:2000	The storage and handling of Class 9 (miscellaneous) dangerous goods and articles
AS/NZS 1425:2003	LP Gas fuel systems for vehicle engines
AS 3873-2001	Pressure equipment - Operation and maintenance
AS 2337.2-2004	Gas cylinder test stations LP Gas fuel vessels for automotive use (Reconfirmed 2016)
AS/NZS 1418.9:1996	Cranes (including hoists and winches) Vehicle hoists
AS 2437-1987	Flusher/sanitizers for bed pans and urine bottles
AS/NZS 2843.1:2006	Timber preservation plants Timber preservation plant site design (Reconfirmed 2016)
AS/NZS 2843.1:2000	Timber preservation plant safety code - Plant design
AS 5062-2006	Fire protection for mobile and transportable equipment
AS/NZS 1425:2007	LP Gas fuel systems for vehicle engines
AS 3689.2-1991	Automatic fire extinguishing systems using halogenated hydrocarbons Mechanical components
AS 2809.3-1999	Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases
AS 1056.1-1991	Storage water heaters General requirements
AS 3533.1-2009	Amusement rides and devices Design and construction
AS 4795-2006	Butterfly valves for waterworks purposes
AS 3980-1999	Guide to the determination of gas content of coal - Direct desorption method
AS/NZS 3788:2006	Pressure equipment - In-service inspection (Reconfirmed 2017)
AS 4983-2003	Gas fuel systems for forklifts and industrial engines
AS/NZS 1596:2008	The storage and handling of LP Gas
AS 5034-2005	Installation and use of inert gases for beverage dispensing
AS/NZS 3497:1998	Drinking water treatment units - Plumbing requirements
AS 4774.2-2002	Work in compressed air and hyperbaric facilities - Hyperbaric oxygen facilities
MP 52-2001	Manual of authorization procedures for plumbing and drainage products
AS 4343-2005	Pressure equipment - Hazard levels
AS 1548-1995	Steel plates for pressure equipment
AS 3597-2008	Structural and pressure vessel steel - Quenched and tempered plate
AS 4738.1-2004	Metal castings Ferrous sand moulded
AS/NZS 2927:2001	The storage and handling of liquefied chlorine gas
AS 3583.4-1991	Methods of test for supplementary cementitious materials for use with portland cement Determination of autoclave expansion
AS 1271-2003	Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016)
AS 4983-2010	Gas fuel systems for forklifts and industrial engines
AS/NZS 1268:1996	Equipment for checking pressure and inflation of tyres
AS/NZS 2843.2:2000	Timber preservation plant safety code - Plant operation
AS 1418.8-2002	Cranes, hoists and winches - Special purpose appliances
AS 1210 SUPP 1-1990
AS/NZS 3509:2009	LP Gas fuel vessels for automotive use (Reconfirmed 2019)
AS/NZS 2843.2:2006	Timber preservation plants Treatment area operation (Reconfirmed 2016)
AS 1548-2008	Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018)
AS 4732-2002	LP Gas fuel systems for marine engines
AS 4214-2002	Gaseous fire extinguishing systems
AS 2971-2002	Serially produced pressure vessels
AS 2118.5-2008	Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020)
AS 2971-2007	Serially produced pressure vessels (Reconfirmed 2017)
AS 1358-2004	Bursting discs and bursting disc devices - Application, selection and installation (Reconfirmed 2016)

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Get in touch with us

AS 1210-1997

Pressure vessels

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory