Customer Support: +353 (0)1 857 6730

Corporate Website About Us
  • There are no items in your cart
Please enter a keyword to search
Advanced search
Home
AS
AS 1418.1-2002

AS 1418.1-2002

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Cranes, hoists and winches General requirements

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

24-07-2024

Superseded by

AS 5246.1:2021
AS 1418.1:2021

Published date

20-06-2002

Publisher

Standards Australia

Preview
€92.75
Excluding VAT
EUR
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20

Specifies general requirements for cranes as defined in AS2549. Includes the design of cranes by the traditional working stress method and also allows design by the limit states method. No set of generally accepted partial load factors necessary for crane design by the limit states method are available.

Committee
ME-005
DocumentType
Standard
ISBN
0 7337 4372 2
Pages
165
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies the general requirements for cranes, hoists, winches, and their components, and appliances intended to carry out similar functions, as defined in AS 2549. It does not include powered industrial trucks as defined in AS 2359.The term ‘crane’ used herein applies to a crane, hoist or winch as appropriate.NOTES: 1 Specific requirements for particular types of cranes and associated equipment are specified in other parts of AS 1418; these requirements take precedence over corresponding requirements in this Standard where any difference exists. Appendix A outlines the structure of the AS 1418 series of Standards.2 Requirements for the selection, operation and maintenance of cranes are given in the appropriate part of AS 2550.

Originated as part of AS CB2-1938.
Previous edition 1994.
Fourth edition 2002.
Reissued incorporating Amendment No.1 (November 2004)

AS/NZS 2080:1995 Safety glass for land vehicles
AS/NZS 1801:1997 Occupational protective helmets
AS 1831-2007 Ductile cast iron (Reconfirmed 2017)
AS 1830-2007 Grey cast iron (Reconfirmed 2017)
AS 4171-1994 Rolling bearings - Static load ratings
AS/NZS 1359.102.3:2000 Rotating electrical machines - General requirements - Methods for determining losses and efficiency - Three-phase cage induction motors
AS/NZS 1269.3:1998 Occupational noise management - Hearing protector program
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS/NZS 2381.2:2006 Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure d
AS/NZS 61000.6.2:2002 Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 1874-2000 Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018)
AS/NZS 3947.4.3:2000 Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads
AS 2381.7-1989 Electrical equipment for explosive atmospheres - Selection, installation and maintenance Intrinsic safety i
AS 3859-1991 Effects of current passing through the human body
AS/NZS 61000.2.5:1999 Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016)
AS 4041-1998 Pressure piping
AS/NZS 1841.5:2007 Portable fire extinguishers Specific requirements for powder type extinguishers (Reconfirmed 2021)
AS 1831-2002 Ductile cast iron
AS 4142.3-1993 Fibre ropes Man-made fibre rope for static life rescue lines
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS/NZS 61000.3.3:1998 Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A
AS 2074-1982 Steel castings
AS 2550-1982 Cranes - Mobile, tower and derrick - Selection and operation
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS 2549-1996 Cranes (including hoists and winches) - Glossary of terms
AS 1250-1981 The use of steel in structures (known as the SAA Steel Structures Code)
HB 13-2000 Electrical equipment for hazardous areas
AS 3608-1989 Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c.
AS 2019-1986 Fluid power - Hydraulic and pneumatic cylinders - Bore and rod dimensions
AS 3007.1-1987 Electrical installations - Surface mines and associated processing plant - Scope and definitions
AS 1832-2007 Malleable cast iron (Reconfirmed 2017)
AS 2550.4-1994 Cranes - Safe use Tower cranes
AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS/NZS 1554.4:1995 Structural steel welding - Welding of high strength quenched and tempered steels
AS 1720.1-1997 Timber structures Design methods
AS 1170.1-1989 Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads and load combinations
AS/NZS 61000.3.7:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD)
AS 2550.10-1994 Cranes - Safe use - Elevating work platforms
AS 2321-2006 Short-link chain for lifting purposes
AS 1448-1981 Carbon steels and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units
AS 4142.2-1993 Fibre ropes Three-strand hawser-laid and eight-strand plaited
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS 3007.2-1987 Electrical installations - Surface mines and associated processing plant - General protection requirements
AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements
AS 2550.5-1993 Cranes - Safe use - Mobile and vehicle-loading cranes
AS 2841-2005 Galvanized steel wire strand (Reconfirmed 2016)
AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
AS/NZS 1554.5:1995 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 4142.1-1993 Fibre ropes Care and safe usage
AS/NZS 2381.1:1999 Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements
AS 1418.5-1995 Cranes (including hoists and winches) Mobile and vehicle-loading cranes
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 2550.13-1997 Cranes - Safe use Building maintenance units
AS/NZS 61000.4.1:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of immunity tests
AS 2550.16-1997 Cranes - Safe use Mast climbing work platforms
AS/NZS 2080:2006 Safety glazing for land vehicles
AS 3608-2005 Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c.
AS 3007.1-2004 Electrical installations - Surface mines and associated processing plant - Scope and definitions
AS/NZS 1554.6:1994 Structural steel welding - Welding stainless steels for structural purposes
AS 2089-1993 Sheave blocks for lifting purposes
AS 1768-1991 Lightning protection
AS 3776-2006 Lifting components for Grade T chain slings
AS/NZS 3947.1:2001 Low-voltage switchgear and controlgear General rules
AS 1438.1-1998 Wire-coil flat slings Product specification
AS/NZS 1418.9:1996 Cranes (including hoists and winches) Vehicle hoists
AS 1403-2004 Design of rotating steel shafts (Reconfirmed 2016)
AS/NZS 1269.1:1998 Occupational noise management - Measurement and assessment of noise immission and exposure
AS/NZS 61000.2.3:1999 Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016)
AS 2550.6-1995 Cranes - Safe use Guided storing and retrieving appliances (Reconfirmed 2018)
AS 1210-1997 Pressure vessels
AS 1353.1-1997 Flat synthetic-webbing slings Product specification (Reconfirmed 2014)
AS 1418.13-1996 Cranes (including hoists and winches) Building maintenance units
AS 2550.15-1994 Cranes - Safe use - Concrete placing equipment
AS 1101.1-1993 Graphic symbols for general engineering - Hydraulic and pneumatic systems
AS 1418.16-1997 Cranes (including hoists and winches) Mast climbing work platforms
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 2670.1-2001 Evaluation of human exposure to whole-body vibration General requirements (Reconfirmed 2016)
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS/NZS 1269.4:1998 Occupational noise management - Auditory assessment
AS 1380.1-1998 Fibre-rope slings - Product specification
AS 2740-2001 Wedge-type sockets
AS 1418.10-1996 Cranes (including hoists and winches) - Elevating work platforms
AS/NZS 1841.6:1997 Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
AS/NZS 1841.6:2007 Portable fire extinguishers Specific requirements for carbon dioxide type extinguishers (Reconfirmed 2021)
AS/NZS 2550.9:1996 Cranes - Safe use Vehicle hoists
AS/NZS 1269.2:1998 Occupational noise management - Noise control management
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 1418.18-2001 Cranes, hoists and winches Crane runways and monorails
AS 2381.2-1993 Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure d
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS 3569-1989 Steel wire ropes
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1726-1993 Geotechnical site investigations
AS 2074-2003 Cast steels
AS/NZS 61000.3.2:1998 Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase)
AS 2430.2-1986 Classification of hazardous areas - Combustible dusts
AS 2076-1996 Wire-rope grips for non-lifting applications
AS 1353.2-1997 Flat synthetic-webbing slings Care and use
AS/NZS 61241.3:1999 Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
AS/NZS 61000.4.6:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices Horizontal lifeline and rail systems
AS/NZS 1841.7:1997 Portable fire extinguishers - Specific requirements for vaporizing-liquid type extinguishers
AS 1418.17-1996 Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016)
HB 13-2007 Electrical equipment for hazardous areas
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 2729-1994 Rolling bearings - Dynamic load ratings and rating life
AS 1288-1994 Glass in buildings - Selection and installation
AS 2550.1-2002 Cranes, hoists and winches - Safe use General requirements
AS 1418.15-1994 Cranes (including hoists and winches) - Concrete placing equipment
AS/NZS 1269.0:1998 Occupational noise management Overview
AS 3108-1990 Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers
AS/NZS 3108:1994 Approval and test specification - Particular requirements for isolating transformers and safety isolating transformers
AS 1085.1-2000 Railway permanent way material Steel rails
AS/NZS 1841.5:1997 Portable fire extinguishers - Specific requirements for powder type extinguishers
AS 3775-1990 Chain slings - Grade T
AS 1055.2-1997 Acoustics - Description and measurement of environmental noise Application to specific situations
AS 2430.3-1991 Classification of hazardous areas - Specific occupancies
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS/NZS 61000.4.7:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
AS 1418.4-2001 Cranes (including hoists and winches) - Tower cranes
AS 2381.6-1993 Electrical equipment for explosive atmospheres - Selection, installation and maintenance Increased safety e
AS/NZS 3947.5.1:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Fall-arrest devices
AS 3007.3-2004 Electrical installations - Surface mines and associated processing plant General requirements for equipment and ancillaries
AS 1418.12-1991 Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016)
AS 2752-2003 Preferred numbers and their use
AS 1269-1989 Acoustics - Hearing conservation
AS 1666.2-1995 Wire-rope slings - Care and use
AS 3600-2001 Concrete structures
AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 1666.1-1995 Wire-rope slings - Product specification
AS 2759-2004 Steel wire rope - Use, operation and maintenance
AS 1418.7-1999 Cranes (including hoists and winches) Builders hoists and associated equipment
AS/NZS 61000.1.1:2000 Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016)
AS 1138-1992 Thimbles for wire rope
AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
AS 1418.2-1997 Cranes (including hoists and winches) Serial hoists and winches
AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use
AS 2318-1990 Swivels for hoists
AS 3585-1990 End fittings for flat-webbing slings
AS 2430.1-1987 Classification of hazardous areas - Explosive gas atmospheres
AS 2319-2001 Rigging screws and turnbuckles
AS/NZS 1664.2:1997 Aluminium structures Allowable stress design (Reconfirmed 2020)
AS 3890-1991 Rolling bearings - System life and reliability
AS/NZS 61000.4.3:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
AS 2670.3-1990 Evaluation of human exposure to whole-body vibration - Evaluation of exposure to whole-body Z-axis vertical vibration in the frequency range 0.1 to 0.63 Hz
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 2670.2-1990 Evaluation of human exposure to whole-body vibration - Continuous and shock-induced vibration in buildings (1 to 80 Hz)
AS/NZS 1768:2007 Lightning protection
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 2670.4-2001 Evaluation of human exposure to whole-body vibration Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
AS 2317-1998 Collared eyebolts
AS/NZS 1891.1:1995 Industrial fall-arrest systems and devices Safety belts and harnesses
AS/NZS 3100:1997 Approval and test specification - General requirements for electrical equipment
AS 1163-1991 Structural steel hollow sections
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS 2741-2002 Shackles (Reconfirmed 2014)
AS/NZS 61000.3.6:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD)
AS 1680-1976 Code of practice for interior lighting and the visual environment
AS 2550.7-1996 Cranes - Safe use Builders' hoists and associated equipment
AS 1288-2006 Glass in buildings - Selection and installation
AS 3679.1-1990 Structural steel - Hot-rolled bars and sections
AS 2670-1983 Vibration and shock - Guide to the evaluation of human exposure to whole body vibration
AS/NZS 1891.4:2000 Industrial fall-arrest systems and devices Selection, use and maintenance
AS/NZS 3947.4.2:2000 Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters
AS 1380.2-1998 Fibre-rope slings - Care and use
AS 3791-1991 Hydraulic hose
AS/NZS 3947.4.1:2001 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS 1438.2-1998 Wire-coil flat slings Care and use (Reconfirmed 2014)
AS/NZS 61000.4.5:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
AS 3007.2-2004 Electrical installations - Surface mines and associated processing plant - General protection requirements
AS 1101.1-2007 Graphic symbols for general engineering Hydraulic and pneumatic systems
AS 4024.1-1996 Safeguarding of machinery General principles
AS/NZS 1841.7:2007 Portable fire extinguishers Specific requirements for vaporizing liquid type extinguishers (Reconfirmed 2021)
AS 1029.1-1985 Low voltage contactors - Electromechanical (up to and including 1000 V a.c. and 1200 V d.c.)
AS 1403-1985 Design of rotating steel shafts
AS 1830-2002 Grey cast iron
AS 1832-2002 Malleable cast iron
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS 1085.1-2002 Railway track material Steel rails (Reconfirmed 2013)
AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 1418.8-1989 Cranes (including hoists and winches) (known as the SAA Crane Code) - Special purpose appliances
AS/NZS 1359.5:2000 Rotating electrical machines - General requirements Three-phase cage induction motors - High efficiency and minimum energy performance standards requirements
AS 1418.6-1988 Cranes (including hoists and winches) (known as the SAA Crane Code) - Guided storing and retrieving appliances
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 3007.3-1987 Electrical installations - Surface mines and associated processing plant - General requirements for equipment and ancillaries

AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS 1418.19-2007 Cranes, hoists and winches Telescopic handlers
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS 1418.5-2002 Cranes, hoists and winches Mobile cranes
AS 2740-2001 Wedge-type sockets
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS 1666.2-1995 Wire-rope slings - Care and use
AS 2321-2006 Short-link chain for lifting purposes
AS 4797-2009 Stainless steel chain for lifting purposes (Reconfirmed 2019)
AS 1138-1992 Thimbles for wire rope
AS 2089-1993 Sheave blocks for lifting purposes
AS 2550.15-1994 Cranes - Safe use - Concrete placing equipment
AS 4324.1-1995 Mobile equipment for continuous handling of bulk materials - General requirements for the design of steel structures
AS 1485-1983 Safety and health in workrooms of educational establishments
AS 2550.11-2004 Cranes, hoists and winches - Safe use Vehicle-loading cranes
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices Selection, use and maintenance
AS 1418.15-1994 Cranes (including hoists and winches) - Concrete placing equipment
AS 2759-2004 Steel wire rope - Use, operation and maintenance
AS 1666.2-2009 Wire-rope slings Care and use (Reconfirmed 2019)
AS 1418.8-2008 Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018)
AS/NZS 1418.10:2011 Cranes, hoists and winches Mobile elevating work platforms
AS/NZS 2550.9:1996 Cranes - Safe use Vehicle hoists
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS 1418.12-1991 Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016)
AS 5804.1-2010 High-voltage live working General
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 4991-2004 Lifting devices
AS 2089-2008 Sheave blocks for lifting purposes (Reconfirmed 2019)
AS 1418.11-2004 Cranes, hoists and winches - Vehicle-loading cranes
AS 2550.5-2002 Cranes, hoists and winches - Safe use - Mobile cranes
AS 2550.20-2005 Cranes, hoists and winches - Safe use Self-erecting tower cranes
AS 2550.3-2002 Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes
AS 1418.2-1997 Cranes (including hoists and winches) Serial hoists and winches
AS/NZS 1418.9:1996 Cranes (including hoists and winches) Vehicle hoists
AS 1418.11-2007 Cranes, hoists and winches - Vehicle-loading cranes
AS 3533.1-2009 Amusement rides and devices Design and construction
AS 2317-1998 Collared eyebolts
AS 1576.4-1991 Scaffolding Suspended scaffolding
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS 1418.4-2004 Cranes, hoists and winches Tower cranes
AS 1418.13-1996 Cranes (including hoists and winches) Building maintenance units
AS 1418.17-1996 Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016)
AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding (Reconfirmed 2024)
AS 3785.5-1998 Underground mining - Shaft equipment Headframes
AS 3585-1990 End fittings for flat-webbing slings
AS 1418.8-2002 Cranes, hoists and winches - Special purpose appliances
AS 2601-2001 The demolition of structures
AS 1418.7-1999 Cranes (including hoists and winches) Builders hoists and associated equipment
AS 2321:2014 Short-link chain for lifting purposes
AS 2550.1-2002 Cranes, hoists and winches - Safe use General requirements
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 3962-2001 Guidelines for design of marinas
AS 1418.6-2004 Cranes, hoists and winches Guided storing and retrieving appliances (Reconfirmed 2018)
AS 2550.10-2006 Cranes, hoists and winches - Safe use Mobile elevating work platforms
AS 4324.1:2017 Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures
AS 2741-2002 Shackles (Reconfirmed 2014)
AS 3775.2-2004 Chain slings - Grade T Care and use
AS 5804.4-2010 High-voltage live working Barehand work

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Get in touch with us