DIN EN 50014 : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
Superseded date
01-12-2004
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
Vorwort
ALLGEMEINES
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen und Symbole
ANFORDERUNGEN FÜR ALLE ELEKTRISCHEN BETRIEBSMITTEL
4 Einteilung der elektrischen Betriebsmittel in
Gruppen und Temperaturklassen
5 Temperaturen
6 Allgemeines
7 Nichtmetallische Gehäuse und nichtmetallische
Gehäuseteile
8 Gehäuse aus Leichtmetall
9 Verschlüsse
10 Verriegelungen
11 Durchführungen
12 Werkstoffe zum Verkleben
13 Ex-Bauteile
14 Anschlussteile und Anschlussräume
15 Anschlussteile für Schutzleiter oder
Potentialausgleichsleiter
16 Einführungen für Kabel, Leitungen und Rohrleitungen
ERGÄNZENDE ANFORDERUNGEN FÜR BESTIMMTE
ELEKTRISCHE BETRIEBSMITTEL
17 Drehende elektrische Maschinen
18 Schaltgeräte
19 Sicherungen
20 Steckvorrichtungen und Steckverbinder
21 Leuchten
22 Kopfleuchten, Handleuchten und Batterien
PRÜFUNGEN
23 Typprüfungen
24 Stückprüfungen
25 Verantwortlichkeit des Herstellers
26 Prüfungen elektrischer Betriebsmittel nach Änderung
oder Instandsetzung
KENNZEICHNUNG
27 Kennzeichnung
BETRIEBSANLEITUNG
28 Betriebsanleitung
Anhang A (informativ) Unterteilung der Gase und Dämpfe
nach ihrer Grenzspaltweite und nach ihrem
Mindestzündstrom
Anhang B (normativ) Ex-Kabel- und Leitungseinführungen
(KLE)
Anhang C (normativ) Abschnitte, denen Ex-Bauteile
entsprechen müssen
Anhang D (informativ) Beispiel einer Vorrichtung für die
mechanische Stossprüfung
Anhang E (gestrichen durch Änderung 1)
Specifies the general requirements for construction, marking and testing of: electrical apparatus, Ex components and Ex cable entries. Coverage includes: definitions and symbols; apparatus grouping and temperature classification; temperatures. Also includes annexes.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 50014 : 97 AMD 2 1999 | Identical |
| BS EN 50014:1998 | Identical |
| VDE 0170-1 : 2014 | Corresponds |
| I.S. EN 50014:1998 | Identical |
| NBN EN 50014 : 97 AMD 2 99 | Identical |
| EN 50014:1997/A2:1999 | Identical |
| NF EN 50014 : 1999 AMD 2 2004 | Identical |
| SN EN 50014 : 1997 AMD 2 1999 | Identical |
| VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| DIN 33962:1997-03 | MEASUREMENT OF GASEOUS EMISSIONS; AUTOMATIC MEASUREMENT SYSTEMS FOR SINGLE MEASUREMENTS OF NITROGEN MONOXIDE AND NITROGEN DIOXIDE |
| DIN 57166 : 1981 | ELECTRICAL INSTALLATIONS AND EQUIPMENT FOR USE IN ATMOSPHERES POTENTIALLY ENDANGERED BY EXPLOSIVE MATERIAL |
| DIN EN 50015 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O' |
| BWB TL 6230-0074 : 2ED 2003 | SPOTLIGHT, PORTABLE, FLASH AND LONG-DISTANCE, EXPLOSION-PROOF |
| VDE 0400-40-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| VDE 0400-6 : 2000 | GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES |
| VDE 0170/0171-3 : 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P" |
| DIN VDE 0170/0171-14 : 1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES; CAP LIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| VDE 0165-10 : 1999 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES) |
| BWB TL 4440-0002 : 5ED 1998 | AIR DRIER, ROOM, ELECTRIC, EXPLOSION PROOF, FOR ROOMS UP TO 250 CBM |
| DIN 40012-1:1984-05 | PROTECTION AGAINST EXPLOSION - MARKING OF ELECTRICAL EQUIPMENT - SIGNS AND PLATES |
| VDE 0170/0171-14 : 1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| DIN EN 61779-1 : 2001 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN 50073 : 2000 | GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES OR OXYGEN |
| BWB TL 6230-0050 : 3ED 1989 | FLASHLIGHT, EXPLOSION-PROOF, 24 V, 25 W |
| DIN 42673-2:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE TYPE IM B 3, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATINGS FOR TYPE OF PROTECTION INCREASED SAFETY "E" |
| DIN V ENV 50269 : 1998 | ASSESSMENT AND REPRESENTATIVE TESTING OF HIGH-VOLTAGE MACHINES |
| DIN 8960:1998-11 | REFRIGERANTS - REQUIREMENTS AND SYMBOLS |
| VDI/VDE 2189 Blatt 3:1994-10 | Three-level stepping controllers - Methods of evaluation the performance |
| VDI/VDE 2189 Blatt 4:1997-09 | Digital acting compact controllers - Methods of evaluating the performance |
| VDI/VDE 3546 Blatt 1:1987-08 | Design of process control rooms; general considerations |
| VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
| VDI/VDE 3515:2007-12 | Multi-contact plug system for electrodes used in process analysis technology |
| VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| VDE 0170-15-1-1 : 1999 AMD 1 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: CONSTRUCTION AND TESTING |
| VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V, 25 A |
| DIN EN 50241-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN VDE 0848-5 : 2001 | SAFETY IN ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS - PROTECTION AGAINST EXPLOSION |
| DIN 57606-1 : 1984 | CONNECTING MATERIAL UP TO 660 V; INSTALLATION BOXES FOR ACCOMMODATION OF EQUIPMENT AND/OR CONNECTING TERMINALS |
| VDE 0170-12-2 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| DIN EN 50303 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| VDE 0118-1 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN |
| VDE 0166 : 81 AMD 1 87 | ELECTRICAL INSTALLATIONS AND APPARATUS THEREOF FOR USE IN ATMOSPHERES POTENTIALLY ENDANGERED BY EXPLOSIVE MATERIAL |
| DIN VDE 0891-5 : 1985 | USE OF CABLES AND INSULATED WIRES FOR TELECOMMUNICATION SYSTEMS AND DATA PROCESSING SYSTEMS - SPECIAL DIRECTION FOR WIRING CABLES ACCORDING TO DIN VDE 0815 |
| VDE 0118 SUPP 1 : 1998 | ERECTION OF ELECTRICAL INSTALLATIONS IN MINES - GUIDE FOR THE PREPARATION OF A TECHNICAL DOCUMENTATION IN THE SENSE OF THE MACHINE DIRECTIVE |
| DIN VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A |
| DIN VDE 0606-1 : 2000 | CONNECTING MATERIALS UP TO 690 V - PART 1: INSTALLATION BOXES FOR ACCOMMODATION OF EQUIPMENT AND/OR CONNECTING TERMINALS |
| DIN 42677-2:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE, TYPE IM B 5, IM B 10, IM B 14, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATINGS FOR TYPE OF PROTECTION INCREASED SAFETY "E" |
| DIN 42673-3:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE, TYPE IM B 3, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATING FOR TYPE OF PROTECTION FLAMEPROOF ENCLOSURE "D" |
| VDE 0891-5 : 1985 | USE OF CABLES AND INSULATED WIRES FOR TELECOMMUNICATION SYSTEMS AND DATA PROCESSING SYSTEMS; SPECIAL DIRECTION FOR WIRING CABLES |
| DIN 42677-3:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE, TYPE IM B 5, IM B 10, IM B 14, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATINGS FOR TYPE OF PROTECTION FLAMEPROOF ENCLOSURE "D" |
| DIN EN 50284 : 2000 | SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP II, CATEGORY 1 G |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| VDE 0848-5 : 2001 | SAFETY IN ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS - PART 3: PROTECTION AGAINST EXPLOSION |
| DIN EN 50017 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - POWDER FILLING 'Q' |
| VDE V 0170/0171-60 : 1998 | ASSESSMENT AND REPRESENTATION TESTING OF HIGH-VOLTAGE MACHINES |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| DIN 53519-1:1972-05 | TESTING OF ELASTOMERS; DETERMINATION OF INDENTATION HARDNESS OF SOFT RUBBER (IRHD); HARDNESS TESTING ON STANDARD SPECIMENS |
| EN 50033 : 1991 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN IEC 60216-2 : 1996 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - PART 2: CHOICE OF TEST CRITERIA |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| VDE 0530-5 : 2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE); CLASSIFICATION |
| EN 50039:1980 | Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i' |
| DIN 17660:1983-12 | WROUGHT COPPER ALLOYS - COPPER-ZINC ALLOYS - (BRASS) - (SPECIAL BRASS) - COMPOSITION |
| DIN EN 50017 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - POWDER FILLING 'Q' |
| VDE 0170-15-1 : 2014 | EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T' (IEC 60079-31:2013) |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| DIN EN 24017:1992-02 | HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B |
| VDE 0304-22 : 2006 | Electrical insulating materials - Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (IEC 60216-2:2005); German version EN 60216-2:2005 |
| DIN EN 24014:1992-02 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| ISO 426-2:1983 | Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys |
| DIN 13-13:1983-10 | ISO METRIC SCREW THREADS - SELECTED SIZES FOR SCREWS, BOLTS AND NUTS FROM 1 TO 52 MM SCREW THREAD DIAMETER AND LIMITS OF SIZES |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| IEC 60050-486:1991 | International Electrotechnical Vocabulary (IEV) - Part 486: Secondary cells and batteries |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| VDE 0170/0171-14 : 1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| VDE 0170-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| HD 611.1 : 200S1 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - GENERAL GUIDELINES FOR AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| DIN IEC 60216-1 : 1996 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - PART 1: GENERAL GUIDELINES FOR AGEING PROCEDURES AND EVALUATING OF TEST RESULTS |
| VDE 0170-5 : 2015-04 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' (IEC 60079-1:2014) |
| ISO 4762:2004 | Hexagon socket head cap screws |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| DIN EN 50019 : 2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| DIN VDE 0170/0171-9 : 1988 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES; ENCAPSULATION "M" |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| DIN 13-15:1982-08 | ISO METRIC SCREW THREADS - FUNDAMENTAL DEVIATIONS AND TOLERANCES FOR SCREW THREADS FROM 1 MM NOMINAL DIAMETER AND LARGER |
| VDE 0170-7 : 2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" (IEC 60079-11:2011 + COR.:2012) |
| VDE 0170/0171-10 : 1982 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS "I" |
| VDE 0170/0171-3 : 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P" |
| DIN VDE 0170/0171-14 : 1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES; CAP LIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| DIN EN 60423:2008-07 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| DIN EN 50281-1-1 : 1999 AMD 1 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| DIN 13-14:1982-08 | ISO METRIC SCREW THREADS - BASIS OF THE TOLERANCE SYSTEM FOR SCREW THREADS 1 MM NOMINAL DIAMETER AND LARGER |
| VDE 0170-4 : 2015 | Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| DIN EN 60192:2002-03 | LOW-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| DIN EN 60662:2013-03 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| VDE 0170-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' (IEC 60079-6:2015) |
| DIN VDE 0530-5 : 1988 | ROTATING ELECTRICAL MACHINES - PART 5: CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ROTATING MACHINERY |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| DIN EN 24032:1992-02 | HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B |
| DIN EN 50020 : 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSIC SAFETY 'I' |
| DIN 53519-2:1972-05 | TESTING OF ELASTOMERS; DETERMINATION OF INDENTATION HARDNESS OF SOFT RUBBER (IRHD); HARDNESS TESTING ON SPECIMENS OF SMALL DIMENSIONS, MICRO-TESTING |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| DIN EN 50015 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O' |
| EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| VDE 0304-21 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| EN 50028:1987 | Electrical apparatus for potentially explosive atmospheres - Encapsulation 'm' |
| VDE 0170-9 : 2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014) |
| HD 611.2 : 200S1 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA |
| ISO 178:2010 | Plastics Determination of flexural properties |
| VDE 0715-3 : 1996 | LOW PRESSURE SODIUM VAPOUR LAMPS |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.