EN 16125:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
Superseded date
04-10-2019
Superseded by
Published date
16-12-2015
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design safety considerations
5 Materials
6 Design
7 Identification and corrosion protection of
above-ground pipework
8 Welded pipes and fittings
9 Inspection and documentation
10 Testing
11 Commissioning
12 Maintenance
Annex A (informative) - Pipe sizing liquid phase
Annex B (informative) - Pipe sizing gas phase
Annex C (informative) - Pipework Integrity Management
Systems (PIMS)
Annex D (informative) - Environmental checklist
Annex E (informative) - Manufacturing and type testing of
composite pipes
Bibliography
This European Standard specifies the requirements for the design, construction, testing, commissioning, operation and maintenance of LPG pipework in both the liquid phase and at full vapour pressure.This European Standard is applicable to LPG pipework having a maximum allowable pressure of less than or equal to 25 bar.This European Standard is applicable to new LPG pipework as well as to replacements of, or extensions to, existing LPG pipework.This European Standard is not applicable to:-pipelines and their accessories;-pipework for the propulsion systems of road vehicles or boats; and-pipework on ships.
| Committee |
CEN/TC 286
|
| DevelopmentNote |
Supersedes PREN 16125. (01/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 16125:2016 | Identical |
| ONORM EN 16125 : 2016 | Identical |
| NF EN 16125 : 2016 | Identical |
| BS EN 16125:2015 | Identical |
| UNI EN 16125 : 2016 | Identical |
| NBN EN 16125 : 2016 | Identical |
| I.S. EN 16125:2015 | Identical |
| DIN EN 16125:2016-03 | Identical |
| NEN EN 16125 : 2015 | Identical |
| NS EN 16125 : 2015 | Identical |
| PN EN 16125 : 2016 | Identical |
| ISO 17672:2016 | Brazing — Filler metals |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN 1045:1997 | Brazing - Fluxes for brazing - Classification and technical delivery conditions |
| EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN ISO 17672:2016 | Brazing - Filler metals (ISO 17672:2016) |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| ISO 9454-2:1998 | Soft soldering fluxes Classification and requirements Part 2: Performance requirements |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| ASME B31.3:2016 | PROCESS PIPING |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| EN ISO 9454-2:2000 | Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998) |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| EN ISO 10380:2012 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
| ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 14324:2004 | Brazing - Guidance on the application of brazed joints |
| EN 1555-5:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 14291:2004 | Foam producing solutions for leak detection on gas installations |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.