ISO 185:2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Grey cast irons Classification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
08-08-2019
Superseded by
Language(s)
English, French
Published date
26-08-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 185:2005 specifies the properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour.
ISO 185:2005 specifies the characterizing properties of grey cast iron by either the tensile strength of separately cast samples, or if agreed by the manufacturer and the purchaser, of cast-on samples or samples cut from a casting, or if agreed between the manufacturer and the purchaser, the hardness of the material measured on castings or on a cast-on knob.
| DevelopmentNote |
DRAFT ISO/DIS 185 is also available for this standard. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
21
|
| ProductNote |
THis standard aslso refers to JIS G 5501
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 185 : 2005 | Identical |
| AS 1830-2007 | Identical |
| BS 1452:1977 | Similar to |
| UNI ISO 185 : 1991 | Identical |
| NS 11100 : 1990 | Similar to |
| DIN 1691:1985-05 | Similar to |
| 10/30236539 DC : 0 | BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| 08/30181058 DC : DRAFT APR 2008 | BS EN ISO 28927-5 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS 2947:1985 | Specification for steel roller chains, types S and C, attachments and chain wheels for agricultural and similar machinery |
| GOST R 52350.1 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D" |
| BS EN 50216-7:2002 | Power transformers and reactor fittings Electric pumps for transformer oil |
| PD ISO/TR 10809-1:2009 | Cast irons Materials and properties for design |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS 7823-1:1995 | Pedestal plain bearings Specification for pillow blocks |
| CEI EN 50216-7 : 2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL |
| DIN EN ISO 945-1:2016-09 (Draft) | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
| I.S. EN 15776:2011 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
| ISO/TR 10809-1:2009 | Cast irons — Part 1: Materials and properties for design |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 50018:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| PREN 1825-1 : DRAFT 1995 | INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| I.S. EN 62841-2-1:2018 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR HAND-HELD DRILLS AND IMPACT DRILLS |
| UNE-EN 15776:2011 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
| ISO 19259:2015 | Plain bearings Bearings with embedded solid lubricants |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| PD ISO/TR 945-3:2016 | Microstructure of cast irons Matrix structures |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| UNE-EN 60079-1:2015 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| BS ISO 10631:2013 | Metallic butterfly valves for general purposes |
| 14/30294680 DC : 0 | BS ISO 19259 - PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANT |
| DIN ISO 11903:2010-11 | Tools for pressing - Guide pillar mountings (ISO 11903:2008) |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| 95/700260 DC : DRAFT JAN 1995 | PREN 1268-1 - SAFETY DEVICES FOR THE PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ISO 11903:2008 | Tools for pressing — Guide pillar mountings |
| IEC 62841-2-1:2017 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills |
| DIN EN 15776:2016-01 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (includes Amendment A1:2015) |
| ISO 11687-1:1995 | Plain bearings Pedestal plain bearings Part 1: Pillow blocks |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| UNE-EN 442-1:2015 | Radiators and convectors - Part 1: Technical specifications and requirements |
| BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. 742-1:1986 | DOMESTIC SOLID-FUELLED HEATING APPLIANCES - PART 1: SAFETY |
| EN 50216-7:2002 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil |
| I.S. EN 1561:2011 | FOUNDING - GREY CAST IRONS |
| I.S. EN 442-1:2014 | RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 858-1:2002-05 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| I.S. EN 1092-2:1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| BS 1452:1977 | Specification for grey iron castings |
| BS 1452:1990 | Specification for flake graphite cast iron |
| BS EN ISO 28927-5 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| I.S. EN 297:1994 | GAS FIRED CENTRAL HEATING BOILERS - TYPE B11 AND B11BS BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNE-EN ISO 28927-5:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
| BS EN 50018:2000 | Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\' |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 06/30149018 DC : 0 | EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS ISO 487:1998 | Steel roller chains, types S and C, attachments and sprockets |
| DIN EN ISO 28927-5:2015-12 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009 + AMD 1:2015) |
| 04/30123544 DC : DRAFT OCT 2004 | IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D' |
| 95/101288 DC : DRAFT FEB 1995 | PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| 13/30278682 DC : 0 | BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS 7823-3:1995 | Pedestal plain bearings Specification for centre flange bearings |
| ISO 7259:1988 | Predominantly key-operated cast iron gate valves for underground use |
| ISO 945-1:2017 | Microstructure of cast irons Part 1: Graphite classification by visual analysis |
| ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
| ISO 487:1998 | Steel roller chains, types S and C, attachments and sprockets |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| PREN 442-1 : DRAFT 2013 | RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| ISO 8512-1:1990 | Surface plates — Part 1: Cast iron |
| PREN 1268-1 : DRAFT 1994 | SAFETY DEVICES FOR THE PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES |
| ISO/TR 10809-2:2011 | Cast irons Part 2: Welding |
| EN 1561:2011 | Founding - Grey cast irons |
| I.S. EN 50216-7:2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL |
| DIN EN 1433:2005-09 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
| BS EN ISO 9905 : 1998 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| UNI EN ISO 9905 : 2011 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| NF EN ISO 28927-5 : 2010 AMD 1 2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| PD ISO/TR 10809-2:2011 | Cast irons Welding |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| ISO 3685:1993 | Tool-life testing with single-point turning tools |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BIS IS/IEC 60079-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| 12/30236280 DC : 0 | BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| BS 7784(1994) : 1994 AMD 9864 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I |
| ISO/TR 945-3:2016 | Microstructure of cast irons Part 3: Matrix structures |
| BS ISO 11903:2008 | Tools for pressing. Guide pillar mountings |
| 08/30176073 DC : DRAFT APR 2008 | BS EN 15776 - UNFIRED PRESSURE VESSELS - ADDITIONAL REQUIREMENTS FOR THE DE SIGN AND FABRICATION OF PRESSURE VESSELS AND PARTS CONSTRUCTED FROM CAST IRON WITH ELONGATION EQUAL OR LESS THAN 15 PERCENT |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| NF EN 62841-2-1 : 2018 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR HAND-HELD DRILLS AND IMPACT DRILLS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| EN 62841-2-1:2018 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| ISO 11687-3:1995 | Plain bearings Pedestal plain bearings Part 3: Centre flange bearings |
| EN ISO 945-1:2018 | Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017) |
| ISO 5996:1984 | Cast iron gate valves |
| ISO 6594:2006 | Cast iron drainage pipes and fittings Spigot series |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 442-1:2015-03 | RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 442-1:2014 | Radiators and convectors Technical specifications and requirements |
| ISO 28927-5:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills |
| BS EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control |
| BS EN 1561:2011 | Founding. Grey cast irons |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 1092-2:1997 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Cast iron flanges |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN 15776:2011+A1:2015 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| BS EN 1433:2002 | Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity |
| ONORM EN 877 : 2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
| I.S. EN 124:1994 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - DESIGN REQUIREMENTS, TYPE TESTING, MARKING, QUALITY CONTROL |
| UL 62841-2-1:1ED 2018-04-30 | Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-1: Particular Requirements for Hand-Held Drills and Impact Drills |
| BS ISO 19259:2015 | Plain bearings. Bearings with embedded solid lubricants |
| DIN ISO 487:2012-10 | Steel roller chains, types S and C, attachments and sprockets (ISO 487:1998) |
| BS 7823-2:1995 | Pedestal plain bearings Specification for side flange bearings |
| 11/30247086 DC : 0 | BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| I.S. EN 60079-1:2014 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| I.S. EN ISO 28927-5:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009) |
| ISO 10631:2013 | Metallic butterfly valves for general purposes |
| BIS IS 2148 : 2004 AMD 2 2008 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D" |
| I.S. 261:2013 | WATER SERVICES ROAD FURNITURE - REQUIREMENTS FOR CAST IRON COVERS AND FRAMES |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| ISO 11687-2:1995 | Plain bearings Pedestal plain bearings Part 2: Side flange bearings |
| I.S. EN ISO 945-1:2018 | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (ISO 945-1:2017) |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| 13/30286778 DC : 0 | BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| UNE-EN 1561:2012 | Founding - Grey cast irons |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| DIN EN ISO 945-1:2010-09 | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| CAN/CSA-C22.2 NO. 62841-2-1:18 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (Binational standard with UL 62841-2-1) |
| SAE J431_200012 | Automotive Gray Iron Castings |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
| EN 1561:2011 | Founding - Grey cast irons |
| ISO 945:1975 | Cast iron — Designation of microstructure of graphite |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.