DIN EN ISO 25178-605:2014-06
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
I.S. EN ISO 286-2:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
DIN EN ISO 10579:2013-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
I.S. EN ISO 25178-3:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012) |
DIN EN ISO 16610-41:2015-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
12/30258955 DC : 0
|
BS ISO 16610-22 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS |
DIN EN ISO 16610-22:2016-04
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
DIN EN ISO 16610-61:2016-04
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015) |
ISO/TS 17450-2:2002
|
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
DIN EN ISO 16610-85:2013-05
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
DD CEN ISO/TS 15530-3:2007
|
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or standards |
UNE-EN ISO 10360-8:2017
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013) |
DKD-R 4-2-1 : 2003-07
|
KALIBRIEREN VON MESSGERAETEN UND NORMALEN FUER DIE RAUHEITSMESSTECHNIK - BLATT 1: KALIBRIEREN VON NORMALEN FUER DIE RAUHEITSMESSTECHNIK |
DIN EN ISO 16610-20:2015-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015) |
UNI EN ISO 10360-8 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS |
I.S. EN ISO 16610-61:2015
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015) |
UNI EN ISO 12781-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
14/30272936 DC : 0
|
BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES |
BS EN ISO 2538-2:2014
|
Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing |
14/30272942 DC : 0
|
BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION |
UNE-EN ISO 25178-2:2013
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) |
ISO 199:2014
|
Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
DIN EN ISO 16610-21:2013-06
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
BS EN ISO 12780-1:2011
|
Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness |
BS EN ISO 12781-2:2011
|
Geometrical product specifications (GPS). Flatness Specification operators |
BS EN ISO 25178-604:2013
|
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
BS EN ISO 25178-701:2010
|
Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments |
DD ISO/TS 16610-32:2009
|
Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters |
I.S. EN ISO 10579:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
12/30258961 DC : 0
|
BS ISO 16610-40 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 40: MORPHOLOGICAL PROFILE FILTERS: BASIC CONCEPTS |
DD CEN ISO/TS 12181-1:2007
|
Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness |
BS EN ISO 12780-2:2011
|
Geometrical product specifications (GPS). Straightness Specification operators |
16/30334592 DC : 0
|
BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
I.S. EN ISO 16610-49:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015) |
11/30243507 DC : 0
|
BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
I.S. EN ISO 16610-71:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014) |
UNE-EN ISO 12781-2:2012
|
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
09/30196964 DC : 0
|
BS EN ISO 25178-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
09/30198186 DC : 0
|
BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS |
BS EN ISO 10360-7:2011
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems |
UNI CEN ISO/TS 14253-3 : 2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
PREN ISO 12780-2 : DRAFT 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
DIN EN ISO 16610-49:2015-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015) |
UNI EN ISO 12780-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
DIN EN ISO 10360-7:2011-09
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
DD CEN ISO/TS 12780-2:2007
|
Geometrical product specifications (GPS). Straightness Specification operators |
BS EN ISO 25178-605:2014
|
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments |
DD ISO/TS 16610-22:2006
|
Geometrical product specifications (GPS). Filtration Linear profile filters. Spline filters |
BS EN ISO 25178-3:2012
|
Geometrical product specifications (GPS). Surface texture: Areal Specification operators |
DIN EN ISO 17450-2:2013-04
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
DD ENV ISO 14253-2:2001
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
DIN EN ISO 12180-1:2011-07
|
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
BS ISO 10135:1994
|
Technical drawings. Simplified representation of moulded, cast and forged parts |
DIN EN ISO 16610-29 E : 2016
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015) |
DD ISO/TS 16610-41:2006
|
Geometrical product specifications (GPS). Filtration Morphological profile filters. Disk and horizontal line-segment filters |
DIN EN ISO 12780-1:2014-04
|
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
12/30262686 DC : 0
|
BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) |
DD ISO/TS 16610-30:2009
|
Geometrical product specifications (GPS). Filtration Robust profile filters. Basic concepts |
BS EN ISO 9493:2010
|
Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics |
BS EN ISO 14253-3:2011
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
BS EN ISO 8062-3:2007
|
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings |
BS ISO 1101:1983
|
Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings |
08/30176932 DC : DRAFT JAN 2008
|
BS EN ISO 25178-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 3: SPECIFICATION OPERATORS |
I.S. EN ISO 25178-70:2014
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
BS EN ISO 3611:2010
|
Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics |
DIN EN ISO 25178-701:2011-01
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
12/30273325 DC : 0
|
BS ISO 16610-30 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS |
I.S. EN ISO 17450-2:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
DD ISO/TS 16610-49:2006
|
Geometrical product specifications (GPS). Filtration Morphological profile filters. Scale space techniques |
09/30198149 DC : DRAFT MAY 2009
|
BS EN ISO 12180-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
UNE-EN ISO 17450-2:2015
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
DD CEN ISO/TS 14253-3:2007
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
08/30169333 DC : DRAFT MAR 2008
|
BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
UNE-EN ISO 25178-602:2011
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
ISO/TR 16015:2003
|
Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
I.S. EN ISO 10135:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
ISO 16610-29:2015
|
Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets |
BS EN ISO 14978:2006
|
Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
DIN EN ISO 14405-2:2012-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
UNE-EN ISO 286-2:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
I.S. EN ISO 14405-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
UNE-EN ISO 14253-2:2012
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
UNI EN ISO 14253-3 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
UNI EN ISO 22432 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION |
UNI EN ISO 25178-3 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS |
UNE-EN ISO 14405-1:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010) |
UNI EN ISO 25178-6 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
UNE-EN ISO 2538-2:2015
|
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
UNI EN ISO 12180-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
UNE-EN ISO 12181-1:2012
|
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010) |
UNI EN ISO 14406 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - EXTRACTION |
UNI EN ISO 10360-7 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
UNI EN ISO 17450-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
UNE-EN ISO 14405-2:2015
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
EN ISO 14405-2:2011
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
I.S. EN ISO 4287:1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
EN ISO 4287:1998/A1:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
ISO/TS 14253-4:2010
|
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules |
BS EN ISO 1302:2002
|
Geometrical product specifications (GPS). Indication of surface texture in technical product documentation |
BS EN ISO 3274:1998
|
Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments |
ISO 10579:2010
|
Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts |
DIN EN ISO 463 : 2009-07
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
BS EN ISO 12085 : 1998
|
GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
ISO 8062-1:2007
|
Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
BS EN ISO 2692:2014
|
Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
ISO 25178-2:2012
|
Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters |
ISO/TS 12180-1:2003
|
Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form |
UNE-EN ISO 14405-1:2012
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010) |
I.S. EN ISO 10360-4:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE |
EN ISO 12780-2:2011
|
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
BS 8888:2002
|
Technical product documentation (TPD). Specification for defining, specifying and graphically representing products |
CEN ISO/TS 12181-2:2007
|
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003) |
CEN ISO/TS 12180-2:2007
|
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003) |
BS 8888:2011
|
Technical product documentation and specification |
EN ISO 12181-1 : 2011
|
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
CEN ISO/TS 12781-2:2007
|
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003) |
CEN ISO/TS 12181-1:2007
|
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003) |
EN ISO 25178-2:2012
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) |
CEN ISO/TS 12780-1:2007
|
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003) |
EN ISO 12179:2000/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
EN ISO 14253-3:2011
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
CEN ISO/TS 12781-1:2007
|
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003) |
EN ISO 13102:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
EN ISO 12780-1:2011
|
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
CEN ISO/TS 14253-4:2010
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010) |
I.S. EN ISO 1302:2002
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
CEN ISO/TS 12780-2:2007
|
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) |
DIN SPEC 91184 E : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
DIN EN ISO 25178-3:2012-11
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012 |
BS EN ISO 25378:2011
|
Geometrical product specifications (GPS). Characteristics and conditions. Definitions |
BS EN ISO 14253-2:2011
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
13/30273328 DC : 0
|
BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS |
08/30181977 DC : DRAFT MAY 2008
|
BS EN ISO 9493 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS |
09/30198152 DC : DRAFT MAY 2009
|
BS EN ISO 12181-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS |
ISO/PAS 12868:2009
|
Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems |
BS EN ISO 10135:2009
|
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) |
BS EN ISO 16610-61:2015
|
Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters |
PD ISO/TS 17863:2013
|
Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies |
DD ISO/TS 16610-1:2006
|
Geometrical product specifications (GPS). Filtration Overview and basic concepts |
DIN EN ISO 2538-2:2015-01
|
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
I.S. EN ISO 11562:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE : PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS |
UNE-EN ISO 10360-7:2012
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
BS EN ISO 13225:2012
|
Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
UNE-EN ISO 13385-2:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
I.S. EN ISO 10360-8:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
13/30275718 DC : 0
|
BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
15/30299406 DC : 0
|
BS EN ISO 16610-28 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
DIN EN ISO 2538-1 E : 2015
|
GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
ISO 14253-2:2011
|
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
UNI EN ISO 12181-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
DIN EN ISO 5458:2016-08 (Draft)
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
12/30258949 DC : 0
|
BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS |
12/30230676 DC : 0
|
BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
07/19984917 DC : 0
|
BS ISO 14659 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
UNI CEN ISO/TS 17450-1 : 2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
DIN EN ISO 8015:2011-09
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
12/30258952 DC : 0
|
BS ISO 16610-20 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS |
15/30299409 DC : 0
|
BS EN ISO 16610-31 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS |
PD CEN ISO/TS 15530-1:2013
|
Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics |
PD CEN ISO/TS 8062-2:2013
|
Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
BS EN ISO 17450-2:2012
|
Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
BS EN ISO 12180-1:2011
|
Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form |
BS ISO 199:2014
|
Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values |
13/30292791 DC : 0
|
BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES |
I.S. EN ISO 16610-1:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
DIN EN ISO 10360-9:2014-04
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
15/30315820 DC : DRAFT JAN 2015
|
BS EN ISO 1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES |
UNI EN ISO 2538-1 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
DIN EN ISO 25378:2011-12
|
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
12/30251864 DC : 0
|
BS EN ISO 16610-85 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: AREAL MORPHOLOGICAL: SEGMENTATION |
ISO/TS 15530-4:2008
|
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
DD CEN ISO/TS 12180-1:2007
|
Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form |
BS EN ISO 16610-29:2015
|
Geometrical product specifications (GPS). Filtration Linear profile filters: Spline wavelets |
09/30198173 DC : DRAFT MAY 2009
|
BS EN ISO 15530-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORK PIECES OR STANDARDS |
UNI EN ISO 8062-3 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
12/30234144 DC : 0
|
BS EN ISO 10360-10 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES |
12/30258967 DC : 0
|
BS ISO 16610-49 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES |
BS EN ISO 16610-40:2015
|
Geometrical product specifications (GPS). Filtration Morphological profile filters: Basic concepts |
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
I.S. EN ISO 5459:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
DIN EN ISO 22432:2012-03
|
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
UNI EN ISO 25178-701 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
BS EN ISO 12781-1:2011
|
Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness |
DD CEN ISO/TS 12181-2 : DRAFT 2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
14/30262683 DC : 0
|
BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM |
BS EN ISO 2538-1:2014
|
Geometrical product specifications (GPS). Wedges Series of angles and slopes |
12/30246960 DC : 0
|
BS EN ISO 2538-2 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
09/30196967 DC : 0
|
BS EN ISO 25178-603 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
08/30154185 DC : DRAFT MAY 2008
|
|
BS EN ISO 286-2:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
UNI EN ISO 10135 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
07/30174208 DC : 0
|
BS ISO/DIS 25178-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
09/30198158 DC : 0
|
BS EN ISO 12780-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
EN ISO 2692:2014
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
DD CEN ISO/TS 12781-2:2007
|
Geometrical product specifications (GPS). Flatness Specification operators |
UNI EN ISO 25178-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
DIN EN ISO 12781-1:2011-07
|
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
S.R. CEN ISO TS 12181-2:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
UNE-EN ISO 286-1:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
UNE-EN ISO 2538-1:2015
|
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
UNE-EN ISO 12180-2:2012
|
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
UNE-EN ISO 12181-2:2012
|
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
I.S. EN ISO 12181-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
I.S. EN ISO 16610-29:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015) |
BS EN ISO 14405-2:2011
|
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
I.S. EN ISO 25378:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
I.S. EN ISO 13385-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
I.S. EN ISO 8062-1:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
I.S. CEN ISO TS 15530-3:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR STANDARDS |
I.S. EN ISO 25178-6:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
ISO/TS 16610-30:2009
|
Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts |
BS EN ISO 5458:1999
|
Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing |
UNI EN ISO 25378 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
DIN EN ISO 15530-3:2012-01
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
I.S. EN ISO 10360-7:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
ISO/TS 16610-49:2006
|
Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques |
UNE-EN ISO 25178-6:2010
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009) |
UNE-EN ISO 12180-1:2012
|
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
ISO/TS 17450-1:2005
|
Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification |
UNI EN ISO 13102 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNI EN ISO 14978 : 2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
DIN EN ISO 14253-1:2013-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
ISO 492:2014
|
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
I.S. EN ISO 12085:1998
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
EN ISO 16610-61:2015
|
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) |
DIN EN ISO 10360-6:2009-01
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
DIN EN ISO 10360-5:2011-01
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
DIN EN ISO 8785:1999-10
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS |
UNE-EN ISO 2692:2015
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
ISO 8062-3:2007
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
ISO 25178-70:2014
|
Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
ISO 13225:2012
|
Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
EN ISO 10360-5:2010
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
BS EN ISO 5436-2:2012
|
Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards |
BS EN ISO 4287 : 2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
BS EN ISO 10360-2:2009
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions |
I.S. EN ISO 10360-2:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
I.S. EN ISO 1119:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011) |
I.S. EN ISO 14660-1:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
DIN ISO 16792:2008-12
|
TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
I.S. EN ISO 2692:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
I.S. EN ISO 5436-2:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
ASME B89.4.10360.2 : 2008
|
ACCEPTANCE TEST AND REVERIFICATION TEST FOR COORDINATE MEASURING MACHINES (CMMS) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
VDI 3414 Blatt 2:2014-02 (Draft)
|
Quality evaluation of wooden surfaces - Testing and measuring methods |
VDI 3414 Blatt 3:2014-02 (Draft)
|
Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces. |
VDI 3414 Blatt 1:2014-02 (Draft)
|
Quality evaluation of wooden surfaces - Surface characteristics |
DIN EN ISO 25178-601:2011-01
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
08/30188936 DC : 0
|
BS EN ISO 16610-21 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS - GAUSSIAN FILTERS |
I.S. EN ISO 12180-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
DIN EN ISO 16610-20 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015) |
12/30262692 DC : 0
|
BS ISO 16610-61 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS |
DIN EN ISO 13225:2012-08
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
EN ISO 5458 : 1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998) |
UNI EN ISO 17450-1 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
UNI EN ISO 25178-604 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
07/30170832 DC : DRAFT AUG 2007
|
BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
BS EN ISO 25178-2:2012
|
Geometrical product specifications (GPS). Surface texture. Areal Terms, definitions and surface texture parameters |
DIN EN ISO 8062-3 E : 2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
PD ISO/TR 10064-6:2009
|
Code of inspection practice Bevel gear measurement methods |
12/30268851 DC
|
BS EN 9300-120. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. CAD 3D explicit geometry with product and manufacturing information |
11/30234091 DC : DRAFT JULY 2011
|
BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
DD ISO/TS 15530-4:2008
|
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
DD ISO/TS 17450-1 : 2005
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
BS EN ISO 12181-1:2011
|
Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness |
BS EN ISO 10360-8:2013
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors |
DIN EN ISO 16610-85 E : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
BS EN ISO 15530-3:2011
|
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards |
I.S. EN ISO 3611:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNE-EN ISO 25178-3:2013
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
DD CEN ISO/TS 12781-1:2007
|
Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness |
DD ISO/TS 16610-20:2006
|
Geometrical product specifications (GPS). Filtration Linear profile filters. Basic concepts |
I.S. EN ISO 25178-604:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
BS EN ISO 25178-606:2015
|
Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
DIN EN ISO 14406:2011-04
|
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010) |
BS EN ISO 10579:2013
|
Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts |
UNI EN ISO 25178-601 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
DIN EN ISO 12180-2:2011-07
|
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
BS EN ISO 25178-602:2010
|
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
BS EN ISO 25178-603:2013
|
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
UNI EN ISO 25178-605 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
UNI EN ISO 2538-2 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
BS EN ISO 16610-71:2014
|
Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters |
DIN EN ISO 8062-3:2008-09
|
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) |
09/30198146 DC : DRAFT MAY 2009
|
BS EN ISO 12180-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
DIN EN ISO 25178-70:2014-06
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
UNI EN ISO 12780-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
12/30258958 DC : 0
|
BS ISO 16610-29 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS |
DD ISO/TS 16610-31:2010
|
Geometrical product specifications (GPS). Filtration Robust profile filters. Gaussian regression filters |
DIN EN ISO 16610-22 E : 2016
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
UNI EN ISO 15530-3 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
ISO/TS 16610-29:2006
|
Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets |
DIN EN ISO 16610-21 E : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
DD CEN ISO/TS 12180-2:2007
|
Geometrical product specifications (GPS). Cylindricity Specification operators |
DIN EN ISO 2538-2 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
I.S. EN ISO 16610-21:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
09/30198179 DC : 0
|
BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
DIN EN ISO 2538-1:2015-01
|
GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014) |
UNI EN ISO 25178-602 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
BS EN ISO 8062-1:2007
|
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary |
12/30251867 DC : 0
|
BS EN ISO 16610-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
DD CEN ISO/TS 12780-1:2007
|
Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness |
BS EN ISO 13102:2012
|
Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics |
09/30198155 DC : DRAFT MAY 2009
|
BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
BS EN ISO 10360-9:2013
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems |
08/30187511 DC : DRAFT AUG 2008
|
BS EN ISO 14406 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DATA EXTRACTION |
UNE-EN ISO 17450-1:2015
|
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
09/30198176 DC : 0
|
BS EN ISO 17450-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
UNI EN ISO 3611 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNI EN ISO 286-1 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
UNI EN ISO 16610-71 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
BS EN ISO 25178-70:2014
|
Geometrical product specification (GPS). Surface texture: Areal Material measures |
UNE-EN ISO 14406:2012
|
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010) |
CEN ISO/TS 17450-1:2007/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005/COR 1:2007) |
DIN EN ISO 25178-603:2014-02
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
UNI EN ISO 14405-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
S.R. CEN ISO/TS 8062-2:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
I.S. EN ISO 16610-85:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
UNI EN ISO 25178-70 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
UNE-EN ISO 8015:2012
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
I.S. EN ISO 12781-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
I.S. EN ISO 14978:2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
UNE-EN ISO 9493:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
ISO 286-1:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
UNI EN ISO 13225 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
ABMA ISO 199 : 2014
|
ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES |
UNI EN ISO 10579 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
UNI EN ISO 5459 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
I.S. EN ISO 12781-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
ISO/TS 17863:2013
|
Geometrical product specification (GPS) Tolerancing of moveable assemblies |
S.R. CEN ISO TS 12180-2:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
S.R. CEN ISO TS 14253-3:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
S.R. CEN ISO TS 12781-1:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
DIN EN ISO 10360-2:2010-06
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
DIN EN ISO 2692:2015-12
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
DIN EN ISO 4288:1998-04
|
GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
DIN EN ISO 14978:2006-09
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
DIN EN ISO 13565-1:1998-04
|
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997 |
DIN EN ISO 4287:2010-07
|
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009) |
ISO 10135:2007
|
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
ISO 463:2006
|
Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges |
BS EN ISO 14660-2:2000
|
Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
ISO/TS 12781-2:2003
|
Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators |
BS EN ISO 10360-3:2001
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of the rotary table as the fourth axis |
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 10360-6:2001
|
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features |
BS EN ISO 8785:1999
|
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters |
ISO/TS 15530-1:2013
|
Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics |
EN ISO 14978:2006/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
I.S. EN ISO 13385-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
EN ISO 13385-2:2011
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
UNE-EN ISO 10360-5:2012
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
UNI EN ISO 10360-5 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
EN ISO 14660-1:1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
EN ISO 25178-6:2010
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
PREN ISO 25178-7 : DRAFT 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
UNI EN ISO 463 : 2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
UNI EN ISO 1119 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES |
UNI EN ISO 10360-6 : 2005
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
EN ISO 25178-605:2014
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) |
UNI EN ISO 5436-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS |
I.S. EN ISO 10360-1:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY |
UNI EN ISO 10360-2 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
UNI EN ISO 4287 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
UNE-EN ISO 12780-2:2012
|
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
DIN EN ISO 12781-2:2011-07
|
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
DIN EN ISO 10135:2010-02
|
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
I.S. CEN ISO TS 12780-2:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
UNI EN ISO 8062-1 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
BS EN ISO 286-1:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
09/30198167 DC : DRAFT MAY 2009
|
BS EN ISO 12781-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
08/30180227 DC : DRAFT MAR 2008
|
BS EN ISO 3611 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
10/30213495 DC : 0
|
BS ISO 10360-9 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
BS EN ISO 12181-2:2011
|
Geometrical product specifications (GPS). Roundness Specification operators |
I.S. EN ISO 25178-605:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
DIN EN ISO 13102:2012-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
UNI CEN ISO/TS 15530-1 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
13/30251855 DC : 0
|
BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS |
DIN EN ISO 13385-1:2011-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
I.S. EN ISO 25178-701:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
DIN EN ISO 10579 E : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
UNI ISO/TS 15530-4 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
UNI EN ISO 16610-21 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS |
UNI EN ISO 10360-9 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
DD CEN ISO/TS 17450-1 : DRAFT 2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
UNI EN ISO 12180-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
DIN EN ISO 12780-2:2011-07
|
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
DD ISO/TS 16610-29:2006
|
Geometrical product specifications (GPS). Filtration Linear profile filters. Spline wavelets |
UNI CEN ISO/TS 8062-2 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
14/30257552 DC : 0
|
BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES |
BS EN ISO 16610-21:2012
|
Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters |
I.S. EN ISO 2538:2003
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF ANGLES AND SLOPES ON PRISMS |
BS EN ISO 16610-41:2015
|
Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters |
UNE-EN ISO 16610-21:2013
|
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
BS EN ISO 8015:2011
|
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
13/30213519 DC : 0
|
BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE |
I.S. EN ISO 9493:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNE-EN ISO 12781-1:2012
|
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
07/30154358 DC : DRAFT AUG 2007
|
DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
BS EN ISO 22432:2011
|
Geometrical product specifications (GPS). Features utilized in specification and verification |
BS EN ISO 16610-85:2013
|
Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation |
11/30205376 DC : 0
|
BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
UNI EN ISO 286-2 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
DIN EN ISO 25178-2:2012-09
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) |
12/30262689 DC : 0
|
BS ISO 16610-60 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 60: LINEAR AREAL FILTERS - BASIC CONCEPTS |
BS EN ISO 16610-49:2015
|
Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques |
ISO/TS 16610-22:2006
|
Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters |
12/30258964 DC : 0
|
BS ISO 16610-41 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS |
DD CEN ISO/TS 14253-4:2010
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Background on functional limits and specification limits in decision rules |
DD ISO/PAS 12868:2009
|
Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems |
DD ISO/TS 17450-2:2002
|
Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
15/30272939 DC : 0
|
BS EN ISO 25178-72 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 72: XML FILE FORMAT X3P |
09/30198170 DC : DRAFT MAY 2009
|
BS EN ISO 14253-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORK PIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
BS ISO 492:2014
|
Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
PD ISO/TR 23605:2009
|
Technical product specification (TPS). Application guidance. International model for national implementation |
09/30198161 DC : 0
|
BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
ISO/TS 16610-1:2006
|
Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts |
96/704403 DC : 0
|
ISO/DIS 9493 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS |
08/30184522 DC : DRAFT JUNE 2008
|
BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS |
UNE-EN ISO 12780-1:2012
|
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
09/30198164 DC : DRAFT MAY 2009
|
BS EN ISO 12781-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
I.S. EN ISO 12780-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
I.S. EN ISO 2538-2:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
I.S. EN ISO 10360-9:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
ISO/TS 16610-28:2010
|
Geometrical product specifications (GPS) Filtration Part 28: Profile filters: End effects |
DIN EN ISO 16610-61 E : 2016
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015) |
DIN EN ISO 12181-1:2011-07
|
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
DIN EN ISO 16610-71:2014-12
|
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
I.S. EN ISO 25178-2:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS (ISO 25178-2:2012) |
UNI EN ISO 12781-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
UNE-EN ISO 13225:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
ISO 15530-3:2011
|
Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards |
UNE-EN ISO 10579:2015
|
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
UNE-EN ISO 25178-601:2011
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
I.S. EN ISO 14253-3:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
ISO/TR 10064-6:2009
|
Code of inspection practice Part 6: Bevel gear measurement methods |
ISO 14978:2006
|
Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
ISO/TS 16610-20:2006
|
Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts |
UNI EN ISO 13385-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
I.S. EN ISO 16610-40:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 40: MORPHOLOGICAL PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-40:2015) |
I.S. EN ISO 17450-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011) |
I.S. EN ISO 8062-3:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
I.S. EN ISO 2538-1:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
DIN EN ISO 286-2:2010-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
ISO/TS 16610-40:2006
|
Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts |
DIN EN ISO 14253-2:2011-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
I.S. EN ISO 25178-603:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
EN ISO 15530-3:2011
|
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
UNI EN ISO 14253-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
ISO 14405-2:2011
|
Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
EN ISO 16610-29:2015
|
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015) |
PREN ISO 2692 : DRAFT 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012) |
UNE-EN ISO 3611:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
S.R. CEN ISO TS 12180-1:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
I.S. EN ISO 12780-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
I.S. EN ISO 14253-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
I.S. EN ISO 12180-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
I.S. EN ISO 14406:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - EXTRACTION |
DIN EN ISO 463 E : 2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
ISO/TS 12181-2:2003
|
Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators |
ISO 22432:2011
|
Geometrical product specifications (GPS) — Features utilized in specification and verification |
ISO 16610-1:2015
|
Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
ISO 25178-603:2013
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
ISO 16610-21:2011
|
Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
ISO 5436-2:2012
|
Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
BS EN ISO 13565-2:1998
|
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve |
ISO 1119:2011
|
Geometrical product specifications (GPS) — Series of conical tapers and taper angles |
ISO 16610-20:2015
|
Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts |
ISO 25178-605:2014
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments |
ISO 10360-9:2013
|
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems |
ISO 9493:2010
|
Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics |
ISO 2692:2014
|
Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
ISO 12781-2:2011
|
Geometrical product specifications (GPS) Flatness Part 2: Specification operators |
BS EN ISO 2538:2003
|
Geometrical product specifications (GPS). Series of angles and slopes on prisms |
ISO 25378:2011
|
Geometrical product specifications (GPS) Characteristics and conditions Definitions |
ISO 25178-3:2012
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators |
ISO 16610-40:2015
|
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts |
ISO 10360-5:2010
|
Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems |
ISO 17450-2:2012
|
Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
ISO 2538-1:2014
|
Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes |
BS EN ISO 10360-6:2001
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features |
ISO 14253-3:2011
|
Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
ISO 13565-3:1998
|
Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve |
ISO 10360-4:2000
|
Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode |
BS EN ISO 463:2006
|
Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges |
ISO/TS 12781-1:2003
|
Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness |
ISO/TS 12181-1:2003
|
Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness |
ISO 16610-22:2015
|
Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters |
ISO 3611:2010
|
Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
ISO 5459:2011
|
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
ISO 25178-604:2013
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
ISO 13385-1:2011
|
Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
ISO/TS 14253-2:1999
|
Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
ISO 12180-1:2011
|
Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form |
ISO 13102:2012
|
Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics |
BS EN ISO 13565-1:1998
|
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions |
ISO 14660-2:1999
|
Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
ISO/TS 12780-2:2003
|
Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators |
ISO 8785:1998
|
Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters |
ISO 8015:2011
|
Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 12181-1:2011
|
Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness |
ISO 17450-1:2011
|
Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
BS EN ISO 10360-5:2010
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus contacting probing systems |
UNE-EN ISO 13385-1:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
BS EN ISO 14660-1:2000
|
Geometrical product specifications (GPS). Geometrical features General terms and definitions |
ISO 10360-1:2000
|
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary |
ISO/TS 15530-3:2004
|
Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards |
ISO/TS 12180-2:2003
|
Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators |
ISO 10360-3:2000
|
Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis |
ISO 13385-2:2011
|
Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
ISO 5436-1:2000
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
ISO 16610-49:2015
|
Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques |
ISO 16610-85:2013
|
Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation |
ISO 25178-6:2010
|
Geometrical product specifications (GPS) Surface texture: Areal Part 6: Classification of methods for measuring surface texture |
ISO 2538-2:2014
|
Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing |
BS EN ISO 3650:1999
|
Geometrical product specifications (GPS). Length standards. Gauge blocks |
ISO 3274:1996
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
ISO 2538:1998
|
Geometrical Product Specifications (GPS) Series of angles and slopes on prisms |
UNE-EN ISO 10360-2:2010
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
I.S. EN ISO 10360-5:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
ISO 16610-41:2015
|
Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
ISO/TS 12780-1:2003
|
Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness |
ISO 25178-602:2010
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
ISO 14660-1:1999
|
Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
ISO 16610-71:2014
|
Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters |
ISO 12780-1:2011
|
Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness |
BS EN ISO 10360-1:2001
|
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary |
ISO 25178-606:2015
|
Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments |
ISO 12179:2000
|
Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 10360-7:2011
|
Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems |
DIN EN ISO 16610-29:2016-04
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015) |
DIN EN ISO 2538:2003-05
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF ANGLES AND SLOPES ON PRISMS |
BS 8888:2004
|
TECHNICAL PRODUCT SPECIFICATION (TPS) - SPECIFICATION |
EN ISO 16610-1:2015
|
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
EN ISO 25178-606:2015
|
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
EN ISO 5436-2:2012
|
Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
EN ISO 463:2006/AC:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
I.S. EN ISO 12179:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
EN ISO 10360-7:2011
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
I.S. EN ISO 13565-2:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
EN ISO 10360-1:2000/AC:2002
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY |
EN ISO 16610-49:2015
|
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) |
EN ISO 8062-1 : 2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
EN ISO 5459:2011
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
EN ISO 16610-85:2013
|
Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) |
EN ISO 10360-2:2009
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
EN ISO 25178-602:2010
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
EN ISO 25178-701:2010
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
EN ISO 3274 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
EN ISO 25178-3:2012
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
EN ISO 5436-1 : 2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 1: MATERIAL MEASURES |
EN ISO 11562:1997/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS |
EN ISO 2538:2003
|
Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998) |
EN ISO 13385-1:2011
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
EN ISO 9493:2010
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
EN ISO 3650:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS |
EN ISO 10360-4:2000/AC:2002
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE |
EN ISO 8015:2011
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
EN ISO 16610-21:2012
|
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
EN ISO 8785 : 1999
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS |
EN ISO 25378:2011
|
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
EN ISO 25178-70 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
EN ISO 10579:2013
|
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
EN ISO 10360-3 : 2000
|
GEOMETRICAL PRODUCTS SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 3: CMMS WITH THE AXIS OF A ROTARY TABLE AS THE FOURTH AXIS (ISO 10360-3:2000) |
EN ISO 16610-22:2015
|
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) |
EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
EN ISO 16610-40:2015
|
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) |
EN ISO 3611:2010
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
EN ISO 16610-41:2015
|
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) |
EN ISO 1119:2011
|
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
EN ISO 14406:2010
|
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010) |
EN ISO 2538-1:2014
|
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
EN ISO 13225:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
EN ISO 25178-601 : 2010
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
EN ISO 22432:2011
|
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
EN ISO 8062-3 : 2007 COR 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
EN ISO 17450-2:2012
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
EN ISO 10360-6:2001/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES (ISO 10360-6:2001/Cor 1:2007) |
EN ISO 286-2:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013) |
EN ISO 10360-9:2013
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) |
EN ISO 14660-2 : 1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE |
EN ISO 16610-20:2015
|
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) |
EN ISO 25178-603:2013
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
EN ISO 13565-1 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS |
EN ISO 2538-2:2014
|
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
EN ISO 10360-8 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
EN ISO 10135:2009
|
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
EN ISO 25178-604:2013
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
I.S. EN ISO 4288:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
I.S. EN ISO 13565-3:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
EN ISO 16610-71:2014
|
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
BS EN ISO 13385-2:2011
|
Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics |
UNE-EN ISO 14253-1:2015
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
I.S. EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
DIN EN ISO 16610-1 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
UNE-EN ISO 13102:2013
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
PREN ISO 12780-1 : DRAFT 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
UNI EN ISO 12181-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS |
DIN EN ISO 25178-604:2013-12
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
DD ISO/TS 16610-28:2010
|
Geometrical product specifications (GPS). Filtration Profile filters. End effects |
DIN EN ISO 16610-41 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
I.S. EN ISO 16610-22:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
DIN EN ISO 14253-3:2011-10
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
BS EN ISO 16610-22:2015
|
Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters |
ISO/TR 16570:2004
|
Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii |
DIN EN ISO 25178-602:2011-01
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
BS EN ISO 17450-1:2011
|
Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification |
BS EN ISO 12180-2:2011
|
Geometrical product specifications (GPS). Cylindricity Specification operators |
DIN EN ISO 12181-2:2011-07
|
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
DIN EN ISO 16610-71 E : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014) |
BS EN ISO 16610-20:2015
|
Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts |
ISO/TS 16610-41:2006
|
Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
I.S. EN ISO 13102:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
11/30231340 DC : 0
|
BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
07/30154336 DC : 0
|
BS ISO 25378 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SPECIFICATION - CHARACTERISTICS AND CONDITIONS |
13/30272933 DC : 0
|
BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES |
DD ISO/TS 16610-40:2006
|
Geometrical product specifications (GPS). Filtration Morphological profile filters. Basic concepts |
DIN EN ISO 25178-6:2010-06
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
ENV ISO 14253-2 : DRAFT 2001
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENTS - PART 2: GUIDE TO THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
BS EN ISO 16610-1:2015
|
Geometrical product specifications (GPS). Filtration Overview and basic concepts |
I.S. EN ISO 13225:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
DIN EN ISO 16610-49 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015) |
07/30170829 DC : DRAFT AUG 2007
|
BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
BS ISO 10579 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
14/30299349 DC : 0
|
BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
DIN EN ISO 17450-1:2012-04
|
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
BS EN ISO 14406:2010
|
Geometrical product specifications (GPS). Extraction |
08/30171709 DC : DRAFT JAN 2008
|
BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
BS EN ISO 5459:2011
|
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
12/30246945 DC : 0
|
BS EN ISO 2538-1 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
UNI EN ISO 8015 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
10/30200334 DC : 0
|
BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
DIN EN ISO 13385-2:2013-06
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
10/30209612 DC : 0
|
BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
96/704406 DC : 0
|
ISO/DIS 463 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL GAUGES - DESIGN AND METROLOGICAL REQUIREMENTS |
DIN EN ISO 10360-8:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
DIN EN ISO 16610-1:2015-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
DD ISO/TS 23165:2006
|
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
I.S. EN ISO 16610-41:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
ISO 3650:1998
|
Geometrical Product Specifications (GPS) Length standards Gauge blocks |
04/30125936 DC : DRAFT NOV 2004
|
ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS |
BS EN ISO 25178-6:2010
|
Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture |
13/30251870 DC : 0
|
BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS |
BIP 3016 : 2004
|
BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM |
BS EN ISO 25178-601:2010
|
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments |
I.S. EN ISO 15530-3:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
S.R. CEN ISO TS 12780-1:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
BS ISO 3040 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES |
PREN ISO 1119 : DRAFT 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
S.R. CEN ISO/TS 14253-4:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
BS EN ISO 13385-1:2011
|
Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics |
I.S. EN ISO 22432:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION (ISO 22432:2011) |
I.S. EN ISO 5458:1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
UNI EN ISO 9493 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
ISO/TS 16610-32:2009
|
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters |
I.S. EN ISO 25178-606:2015
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015) |
I.S. EN ISO 16610-20:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015) |
UNI CEN ISO/TS 14253-4 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES |
UNI EN ISO 13385-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
I.S. EN ISO 12181-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS |
S.R. CEN ISO/TS 15530-1:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013) |
I.S. EN ISO 8015:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
UNE-EN ISO 25178-701:2011
|
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
UNI EN ISO 25178-603 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
UNI EN ISO 16610-85 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION |
UNI ISO 129-1 : 2011
|
TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
ISO 16610-61:2015
|
Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters |
S.R. CEN ISO TS 12781-2:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
I.S. CEN ISO TS 17450-1:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005) |
I.S. EN ISO 25178-601:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
I.S. EN ISO 25178-602:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
ISO/TS 16610-31:2010
|
Geometrical product specifications (GPS) Filtration Part 31: Robust profile filters: Gaussian regression filters |
CEN ISO/TS 8062-2 : 2013 COR 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
DIN EN ISO 1119:2012-04
|
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
DIN EN ISO 3274:1998-04
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
ISO 12181-2:2011
|
Geometrical product specifications (GPS) Roundness Part 2: Specification operators |
ISO 25178-601:2010
|
Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
ISO/TS 14253-3:2002
|
Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
ISO 14406:2010
|
Geometrical product specifications (GPS) — Extraction |
UNE-EN ISO 1119:2012
|
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
ISO 10360-2:2009
|
Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions |
ISO 10360-8:2013
|
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors |
ISO 25178-701:2010
|
Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments |
BS EN ISO 11562 : 1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS |
BS EN ISO 12179:2001
|
Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
ISO/TS 8062-2:2013
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
ISO 12180-2:2011
|
Geometrical product specifications (GPS) Cylindricity Part 2: Specification operators |
BS EN ISO 1119:2011
|
Geometrical product specifications (GPS). Series of conical tapers and taper angles |
ISO 12780-2:2011
|
Geometrical product specifications (GPS) Straightness Part 2: Specification operators |
ISO 12781-1:2011
|
Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness |
DIN EN ISO 463:2006-06
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
EN ISO 4288 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN ISO 12180-2:2011
|
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
BS 8888:2017
|
Technical product documentation and specification |
EN ISO 12180-1:2011
|
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
CEN ISO/TS 15530-3:2007
|
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004) |
EN ISO 12085:1997/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
EN ISO 17450-1:2011
|
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
DIN EN ISO 3611:2011-03
|
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
EN ISO 13565-3 : 2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
EN ISO 12781-1:2011
|
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
DIN EN ISO 5436-2:2013-04
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
CEN ISO/TS 12180-1:2007
|
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/TS 12180-1:2003) |
CEN ISO/TS 14253-3:2007
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002) |
EN ISO 12781-2:2011
|
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
CEN ISO/TS 15530-1:2013
|
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) |
EN ISO 12181-2 : 2011
|
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
BS 8888:2013
|
Technical product documentation and specification |
EN ISO 1302 : 2002
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002) |
EN ISO 13565-2 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |