Skip to content
Please enter a keyword to search

  • EN ISO 4287:1998/A1:2009

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS

    Available format(s): 

    Superseded date:  29-01-2022

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Surface profile parameter definitions
    Annex A (informative) - Text equivalents
    Annex B (informative) - Flowchart for surface assessment
    Annex C (informative) - Comparison of basic terms and parameter
                            symbols between ISO 4287-1:1984 and
                            ISO 4287:1996
    Annex D (informative) - Relationship to the GPS matrix model
    Annex E (informative) - Bibliography
    Annex ZA (normative) - Normative references to international
                           publications with their relevant
                           European publications

    Abstract - (Show below) - (Hide below)

    Establishes terms, definitions and parameters for determination of surface texture (roughness, waviness and primary profile) by profiling methods.

    General Product Information - (Show below) - (Hide below)

    Committee TC 290
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    06/30157850 DC : 0 BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
    PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    I.S. EN 1071-3:2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
    13/30285283 DC : 0 BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS
    I.S. EN 13287:2004 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    BS EN 61400-4:2013 Wind turbines Design requirements for wind turbine gea
    14/30303750 DC : 0 BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
    BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
    DIN EN 15165 E : 2015 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13001-3-3:2014 Cranes. General design Limit states and proof of competence of wheel/rail contacts
    05/30132854 DC : DRAFT APR 2005 EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    UNE-EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
    09/30209365 DC : DRAFT NOV 2009 BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
    UNE-EN 15129:2011 Anti-seismic devices
    15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
    BS EN 50526-1:2012 Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
    12/30262897 DC : DRAFT JUNE 2012 BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS
    03/106158 DC : DRAFT APR 2003 EN 14653-1 - MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
    15/30325000 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
    05/30130669 DC : DRAFT MAR 2005 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    10/30201497 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    03/114108 DC : DRAFT AUG 2003 EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    10/30234619 DC : 0 BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
    11/30251971 DC : 0 BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
    PREN 12043 : DRAFT 2012 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 16281:2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    CEI EN 50526-1 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
    I.S. EN 61914:2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
    16/30322240 DC : 0 BS EN 14535-2 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
    S.R. CEN TS 13001-3-5:2010 CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
    I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
    PREN 13555 : DRAFT 2011 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
    UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
    EN 12331:2015 Food processing machinery - Mincing machines - Safety and hygiene requirements
    18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    BS EN 12697-31:2007 Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor
    DIN EN 15129:2010-06 ANTI-SEISMIC DEVICES
    EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use
    DIN EN 1672-2:2009-07 Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009)
    DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 13288:2010-10 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    DIN EN 13231-3 E : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
    DIN EN 13981-1:2003-11 ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 1: EXTRUDED PRODUCTS
    DIN EN 12852:2011-02 Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 13081:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012)
    DIN EN 13591:2010-10 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 1759-4:2003-12 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES
    DIN EN 13570:2011-02 Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
    BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
    BS EN 12852 : 2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13954 : 2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12984 : 2005 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
    BS EN 623-4:2004 Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness
    BS EN 13311-5:2001 Biotechnology. Performance criteria for vessels Kill tanks
    BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes
    BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
    BS EN 13091:2000 Biotechnology. Performance criteria for filter elements and filtration assemblies
    DIN EN 10305-1:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
    BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
    BS EN 13886 : 2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12721 : 2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
    BS EN 12853 : 2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1678 : 1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements
    EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
    I.S. EN 13871:2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13951:2012 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE
    I.S. EN 10305-2:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
    DIN EN 12851:2010-10 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13570:2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
    EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
    EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
    EN 12722:2009+A1:2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
    EN 62444 : 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
    EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 13231-4:2013 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
    EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
    EN 13311-1:2001 Biotechnology - Performance criteria for vessels - Part 1: General performance criteria
    EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
    EN 13083:2008+A1:2013 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
    EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
    EN 12884:1999 Biotechnology - Performance criteria for centrifuges
    EN ISO 12179:2000/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
    EN 10339:2007 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
    EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements
    EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements
    EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements
    EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
    DIN EN 13001-3-3:2015-02 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
    EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
    EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements
    EN 13311-5:2001 Biotechnology - Performance criteria for vessels - Part 5: Kill tanks
    EN 13312-1:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
    EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
    EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
    EN 12561-6:2011 (edition 2) Railway applications - Tank wagons - Part 6: Manholes
    EN 1071-2 : 2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
    EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements
    I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    EN 13231-3:2012 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
    EN 13081:2008+A1:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
    EN 12690:1999 Biotechnology - Performance criteria for shaft seals
    EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
    EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
    EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
    EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements
    EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
    VDI/VDE 2252 Blatt 2:2007-09 Precision engineering components - Guides - Synthetic gliding bearings
    EN 50368:2003 Cable cleats for electrical installations
    DIN EN 12722:2014-02 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
    09/30200407 DC : 0 BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
    I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    DD ENV 13287:2002 Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance
    11/30244198 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
    BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
    CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
    12/30260942 DC : 0 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    PREN 14535-2 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
    EN 15129:2018 (edition 2) Anti-seismic devices
    13/30291469 DC : 0 BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    10/30234330 DC : DRAFT DEC 2010 BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    PREN 62444 : DRAFT 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
    DIN EN 16743 E : 2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 16701:2014 Energetic materials for defence. Safety, vulnerability. Friability
    15/30324994 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
    11/30251968 DC : 0 BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 50526-2:2014 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices
    PREN 10049 : DRAFT 2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
    12/30259995 DC : 0 BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    11/30244195 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
    PREN 13231-4 : DRAFT 2011 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
    BS EN 16743:2016 Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements
    I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
    PREN 12697-31 : DRAFT 2014 BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
    I.S. EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD))
    EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
    UNI EN 15165 : 2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 14535-1 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
    I.S. EN 50262:1999 METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
    I.S. EN 13231-4:2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
    UNI EN 16281 : 2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    I.S. EN 1999-1-1:2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
    I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    PREN 12041 : DRAFT 2011 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
    PREN 1974 : DRAFT 2016 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    EN 12042 : 2014 COR 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 15129:2009 Anti-seismic devices
    DIN EN 12042:2014-07 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 15129 : 2009 ANTI-SEISMIC DEVICES
    UNI EN 12042 : 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 16282-4:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements
    PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
    CEI EN 62444 : 2014 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
    NF EN 1673 : 2000 + A1 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1678:2011-02 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
    DIN EN 1674:2015-12 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 12984:2011-02 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12331:2015-12 Food processing machinery - Mincing machines - Safety and hygiene requirements
    DIN EN 1916:2003-04 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 13951:2012-08 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE
    DIN EN 10305-4 E : 2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    DIN EN 10305-6:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    DIN EN 12041:2015-02 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 15183 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
    DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
    DIN EN 14655:2010-11 Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12043:2015-02 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
    BS EN 13570 : 2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
    UNE-EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
    UNE-EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
    DIN EN 10305-3:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
    BS EN 12884:1999 Biotechnology. Performance criteria for centrifuges
    BS EN 12885:1999 Biotechnology. Performance criteria for cell disrupters
    BS EN 12043:2014 Food processing machinery. Intermediate provers. Safety and hygiene requirements
    BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    BS EN 1071-3:2005 Advanced technical ceramics. Methods of test for ceramic coatings Determination of adhesion and other mechanical failure modes by a scratch test
    BS EN 13534 : 2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
    BS EN 1337-2:2004 Structural bearings Sliding elements
    I.S. EN 10305-5:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
    I.S. EN 13954:2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 10305-6:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    I.S. EN 13288:2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1092-3:2003 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    I.S. EN 12331:2015 FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13885:2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    EN 1916:2002/AC:2008 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    I.S. EN 13886:2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13621:2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 10049:2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
    I.S. EN 12721:2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
    I.S. EN 12043:2014 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
    DIN EN 13287:2004-08 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
    I.S. EN 13534:2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13208:2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1071-2:2003-02 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
    I.S. EN 13083:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    I.S. EN 453:2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1672-2 : 2009 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
    DIN EN 1820:2009-12 ANAESTHETIC RESERVOIR BAGS
    DIN EN 1071-3:2005-10 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
    I.S. EN 12355:2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12852:2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN ISO 14159:2008 SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
    I.S. EN 12851:2006 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 12697-31:2007-06 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
    I.S. EN 13591:2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12020-1:2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    I.S. EN 12984:2006 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12041:2014 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1674:2015 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13555:2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
    I.S. EN 1672-2:2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - HYGIENE REQUIREMENTS
    I.S. EN 13081:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13870:2015 FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    I.S. EN 13231-3:2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
    I.S. EN 12952-3:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
    I.S. EN 1337-2:2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    I.S. EN 12853:2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1071-1:2003-06 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE PROFILOMETER
    I.S. EN 10305-4:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    I.S. EN 12854:2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 10305-1:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
    I.S. EN 10305-3:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
    I.S. EN 14655:2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12561-6:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    I.S. EN 1678:1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12722:2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
    UNI EN 453 : 2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    VDI/VDE 2655 Blatt 1.2:2010-10 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
    VDI 3414 Blatt 2:2014-02 (Draft) Quality evaluation of wooden surfaces - Testing and measuring methods
    VDI 2083 Blatt 17:2013-06 Cleanroom technology - Compatibility of materials with the required cleanliness
    VDI 5581:2011-11 Measurement procedures for quality control in precision moulding of aspherical, freeform and microoptics
    VDI/VDE 2655 Blatt 1.1:2008-03 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
    VDI/VDE 2631 Blatt 3:2007-08 Form measurement - Properties and selection of filters
    NF EN 12355 : 2003 + A1 2010 FOOD PROCESSING MACHINERY - DERIDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    VDI 3414 Blatt 3:2014-02 (Draft) Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces.
    VDI/VDE 2656 Blatt 1:2008-06 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
    VDI/VDE 2631 Blatt 7:2012-02 Form measurement - Determination of positional deviations of the form-measurement axes
    VDI/VDE 2612 Blatt 5:2015-02 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
    VDI 2083 Blatt 9.1:2006-12 Clean room technology - Compatibility with required cleanliness and surface cleanliness
    VDI 3431:2016-08 Bending of profiles - Testing notes for profile bending elements
    VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
    VDI/VDE 2602 Blatt 4:2014-09 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
    PREN 10305-5 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
    DIN EN 1999-1-1:2014-03 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    BS EN 13231-4:2013 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in switches and crossings
    BS EN 16281:2013 Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
    I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
    14/30303762 DC : 0 BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
    06/30125744 DC : 0 EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    13/30286103 DC : 0 BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    PREN 13871 : DRAFT 2012 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1071-1:2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
    16/30337802 DC : 0 BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    09/30201490 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
    BS EN 16282-4:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements
    11/30251965 DC : 0 BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 15165:2014 Food processing machinery. Forming machines. Safety and hygiene requirements
    BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
    UNE-EN 61914:2016 Cable cleats for electrical installations
    DIN EN 16743:2016-05 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    14/30303756 DC : 0 BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS; DESIGN AND SAFETY REQUIREMENTS
    DIN EN 13001-3-3 E : 2015 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
    00/716563 DC : DRAFT NOV 2000 EN 1759-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24
    09/30181706 DC : 0 BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 15165:2015-01 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    05/30130673 DC : DRAFT MAR 2005 BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 16282-2:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
    DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
    UNE-EN 61386-25:2012 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
    EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
    BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
    11/30248108 DC : 0 BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
    BS EN 16282-8:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing
    13/30275599 DC : 0 BS EN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
    05/30131376 DC : DRAFT MAR 2005 BS EN 15183 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
    15/30324997 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    UNE-EN 14653-1:2012 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
    PREN 10305-6 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    PREN 13495 : DRAFT 2017 THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS)(FOAM BLOCK TEST)
    DIN EN 16452 E : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
    17/30347025 DC : 0 BS EN 15129 - ANTI-SEISMIC DEVICES
    EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
    PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    I.S. EN 50368:2003 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
    16/30338566 DC : 2016-06 BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
    PREN 50526-1 : DRAFT 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
    I.S. EN 12697-31:2007 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
    14/30310358 DC : 0 BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
    UNE-EN 16282-3:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements
    I.S. EN 16282-3:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
    DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    DIN EN 13208:2011-02 Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12853:2012-02 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12355:2011-02 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12854:2010-12 Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12721:2014-02 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
    DIN EN 13083:2013-08 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    DIN EN 13954:2010-12 Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
    DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
    DIN EN 13870:2015-12 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
    DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
    DIN EN 13885:2011-02 Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 14655 E : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1337-2:2004-07 Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
    BS EN 13312-1:2001 Biotechnology. Performance criteria for piping and instrumentation General performance criteria
    DIN EN 10305-2:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
    BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes
    BS EN 12722 : 2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
    BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
    BS EN 12355 : 2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 12331:2016 Food processing machinery - Mincing machines - Safety and hygiene requirements
    BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
    UNE-EN 12561-6:2012 Railway applications - Tank wagons - Part 6: Manholes
    DIN EN 10305-5:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
    I.S. EN 1820:2005 ANAESTHETIC RESERVOIR BAGS
    EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
    EN 50262 : 1998 AMD 2 2004 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
    UNI EN 13288 : 2010 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 14655 : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12722 : 2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
    UNI EN 12854 : 2010 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13621 : 2010 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13886 : 2010 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13954 : 2010 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13208 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1337-2 : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    UNI EN 13231-3 : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
    UNI EN 12852 : 2010 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13871 : 2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13083 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    ONORM EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12952-3 : 2012 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
    UNI EN 12851 : 2010 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12043 : 2015 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12984 : 2010 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 10049 : 2014 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
    UNI EN 13951 : 2012 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT - DESIGN RULES TO ENSURE HYGIENE IN USE
    UNI EN 1678 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13885 : 2010 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13534 : 2010 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12041 : 2015 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13081 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    UNI EN 1820 : 2009 ANAESTHETIC RESERVOIR BAGS
    UNI EN 1916 : 2004 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    UNI EN 12561-6 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    UNI EN 12853 : 2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12721 : 2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
    UNI EN 12355 : 2010 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13570 : 2010 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 13591 : 2010 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 13231-4:2014 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
    DIN EN 16701:2015-04 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    BS EN 62444:2013 Cable glands for electrical installations
    BS EN 61386-25:2011 Conduit systems for cable management Particular requirements. Conduit fixing devices
    I.S. EN 16282-8:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING
    PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
    PREN 14420-2 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
    I.S. EN 623-4:2004 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: DETERMINATION OF SURFACE ROUGHNESS
    UNI EN 1999-1-1 : 2014 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    BS EN 61914:2016 Cable cleats for electrical installations
    PREN 16282-3 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 16743:2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    16/30322243 DC : 0 BS EN 14535-1 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
    16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
    BS EN 16282-3:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
    15/30325003 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
    UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    08/30185056 DC : DRAFT SEP 2008 BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 50368:2003 Cable cleats for electrical installations
    PREN 13870 : DRAFT 2013 FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    11/30247562 DC : 0 BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 16281:2013-04 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    PREN 1672-2 : DRAFT 2003 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
    BS EN 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
    15/30324991 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
    12/30260299 DC : 0 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    12/30235298 DC : DRAFT JAN 2012 BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
    BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
    10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    09/30201494 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
    11/30244207 DC : 0 BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS
    BS EN 50262:1999 Cable glands for electrical installations
    UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
    04/30114371 DC : DRAFT JUN 2004 EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION
    BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
    DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 16701:2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    BS EN 16452:2015+A1:2019 Railway applications. Braking. Brake blocks
    I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
    I.S. EN 60099-8:2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    XP CEN/TS 13001-3-5 : 2010 XP CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS
    I.S. EN 16282-4:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 50526-1:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
    I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
    KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
    I.S. EN 15165:2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    17/30366771 DC : 0 BS EN 13495 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) (FOAM BLOCK TEST)
    PREN 16282-8 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
    PREN 454 : DRAFT 2011 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    PREN 12042 : DRAFT 2011 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 16452:2015 Railway applications - Braking - Brake blocks
    UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 62155:2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
    DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
    DIN EN 1337-2 E : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
    DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products
    DIN EN 13886:2011-02 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 14653-1:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
    BS EN 1092-4:2002 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Aluminium alloy flanges
    BS EN 13885 : 2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 14655:2006 Food processing machinery - Baguette slicers - Safety and hygiene requirements
    BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    UNE-EN 13081:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
    BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
    BS EN 453:2014 Food processing machinery. Dough mixers. Safety and hygiene requirements
    BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
    BS EN 13311-1:2001 Biotechnology. Performance criteria for vessels General performance criteria
    UNE-EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
    BS EN 1071-2:2002 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by the crater grinding method
    BS EN 13871:2014 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
    BS EN 13621 : 2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1820:2005 Anaesthetic reservoir bags
    UNE-EN 13231-3:2013 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
    UNE-EN 12722:2009 Furniture - Assessment of surface resistance to dry heat
    BS EN 10305-6:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems
    BS EN 13287:2004 Safety, protective and occupational footwear for professional use. Test method for slip resistance
    UNE-EN 13083:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
    BS EN 13208 : 2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 13288:2006 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
    BS EN 13081 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    BS EN 1674:2015 Food processing machinery. Dough sheeters. Safety and hygiene requirements
    UNE-EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
    BS EN 10339:2007 Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
    UNE-EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
    UNE-EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
    BS EN 13083 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    BS EN 1337-6:2004 Structural bearings Rocker bearings
    BS EN 13288 : 2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
    BS EN 12041:2014 Food processing machinery. Moulders. Safety and hygiene requirements
    UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
    BS EN 13095:2000 Biotechnology. Performance criteria for off-gas systems
    BS EN 10305-3:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes
    BS EN 12331:2015 Food processing machinery. Mincing machines. Safety and hygiene requirements
    BS EN 13951:2012 Liquid pumps. Safety requirements. Agrifoodstuffs equipment; Design rules to ensure hygiene in use
    UNE-EN 1820:2006 Anaesthetic reservoir bags (ISO 5362:2000, modified)
    UNE-EN 12721:2009 Furniture - Assessment of surface resistance to wet heat
    BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes
    UNE-EN 13591:2006 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
    BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
    BS EN 13870:2015 Food processing machinery. Portion cutting machines. Safety and hygiene requirements
    BS EN 12560-5:2001 Flanges and their joints. Gaskets for Class-designated flanges Metallic ring joint gaskets for use with steel flanges
    UNE-EN 13871:2015 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
    UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
    BS EN 12020-1:2008 Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery
    BS EN 13591 : 2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
    UNE-EN 13870:2016 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
    UNE-EN 12952-3:2012 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
    ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
    BS EN 12854 : 2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1672-2 : 2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
    EN 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods
    UNI EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    EN 12721:2009+A1:2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
    EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements
    ENV 13287:2002/AC:2003 SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - TEST METHOD FOR THE DETERMINATION OF SLIP RESISTANCE
    EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
    EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
    EN 16701:2014 Energetic materials for defence - Safety, vulnerability - Friability
    EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
    EN 12020-1:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
    EN 1820:2005+A1:2009 Anaesthetic reservoir bags (ISO 5362:2000, modified)
    EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
    EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements
    EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
    EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements
    EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements
    EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
    EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
    EN 13981-1:2003 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products
    EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene requirements
    EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
    EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
    EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
    EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
    EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements
    EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
    EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
    EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements
    EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements
    EN 12851:2005+A1:2010 Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements
    EN 16282-8:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing
    UNE-EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
    14/30303747 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
    DD CEN/TS 13001-3-5:2010 Cranes. General design Limit states and proof of competence of forged hooks
    DIN EN 16701 E : 2015 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    I.S. EN 1071-2:2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
    UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    PREN 16282-4 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
    PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    13/30281710 DC : 0 BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
    I.S. EN 12042:2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    09/30201486 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
    09/30201500 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES
    12/30261641 DC : 0 BS EN 12043 - FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
    11/30243606 DC : 0 BS EN 13231-4 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
    BS EN 71-8:2018 Safety of toys Activity toys for domestic use
    14/30299146 DC : 0 BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    14/30303744 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
    13/30286138 DC : 0 BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
    UNE-EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
    DIN 3863:2003-08 COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y
    DIN EN 15129 E : 2010 ANTI-SEISMIC DEVICES
    UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
    S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
    15/30324988 DC : 0 BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
    11/30244201 DC : 0 BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
    03/104284 DC : DRAFT FEB 2003 EN 1672-2 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
    11/30244213 DC : 0 BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING
    03/316448 DC : DRAFT SEP 2003 BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANNING WORK IN TRACK
    UNE-EN 16452:2016 Railway applications - Braking - Brake blocks
    PREN 16282-2 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
    NF EN 15129 : 2010 ANTI-SEISMIC DEVICES
    BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    02/122780 DC : DRAFT AUG 2002 PREN 623-4 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: GUIDANCE ON THE DETERMINATION OF SURFACE ROUGHNESS
    CEI EN 61386-25 : 2012 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES
    I.S. EN 13001-3-3:2014 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
    DIN EN 13231-4:2013-06 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
    PREN 15129 : DRAFT 2017 ANTI-SEISMIC DEVICES
    I.S. EN 16452:2015+A1:2019 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
    I.S. EN 50526-2:2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
    CEI EN 50526-2 : 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
    EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
    I.S. EN 71-8:2018 SAFETY OF TOYS - PART 8: ACTIVITY TOYS FOR DOMESTIC USE
    PREN 453 : DRAFT 2011 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 60099-4:2014 Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
    UNI EN 1092-1 : 2013 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
    UNI EN 13231-4 : 2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
    UNI EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    CEI EN 60099-8 : 2012 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    I.S. EN 61386-25:2011 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES (IEC 61386-25:2011)
    BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    DIN EN 12952-3:2012-03 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
    EN 12697-31:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor
    KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
    UNE-EN 12463:2006 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
    DIN EN 13555:2014-07 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    DIN EN 13390:2011-02 Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 13621:2011-02 Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12020-1:2008-06 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
    DIN EN 13534:2011-02 Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010)
    DIN EN 12561-6:2011-10 Railway applications - Tank wagons - Part 6: Manholes
    DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
    DIN EN 1337-6 E : 2004 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
    DIN EN 453:2015-04 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13871:2015-01 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13981-1:2003 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products
    UNE-EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
    BS EN 12690:1999 Biotechnology. Performance criteria for shaft seals
    BS EN 1759-4:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Aluminium alloy flanges
    BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
    BS EN 1071-1:2003 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer
    BS EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support Product specifications
    BS EN 12561-6:2011 Railway applications. Tank wagons Manholes
    BS EN 13231-3:2012 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track
    BS EN 1337-4:2004 Structural bearings Roller bearings
    BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
    BS EN 10305-4:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems
    BS EN 14655 : 2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13390 : 2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12952-3:2011 Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler
    BS EN 12851 : 2005 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
    EN 12853:2001+A1:2010/AC:2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 10310:2004-07 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
    CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
    EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
    EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
    EN 13287:2004 Personal protective equipment - Footwear - Test method for slip resistance
    CEN/TS 13001-3-5:2010 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
    EN 61914:2016 Cable cleats for electrical installations
    EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    UNI EN 13555 : 2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
    DIN EN 13231-3:2012-04 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
    EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
    EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
    EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
    EN 12560-5:2001 Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges
    EN 1071-3 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
    EN 13095:1999 Biotechnology - Performance criteria for off-gas systems
    DIN EN 10305-4:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
    EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements
    EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
    DIN EN 16452:2015-11 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
    EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
    DIN EN 10329:2006-04 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
    DIN EN 10339:2007-05 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
    EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
    EN 61386-25 : 2011 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
    EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
    DIN EN 15183:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
    UNE-EN 13390:2002 Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
    UNE-EN 1673:2001 Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
    EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    EN ISO 11562:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective