ASTM D 5580 : 2015
|
Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
|
ASTM D 6615 : 2015 : REV A
|
Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
|
ASTM D 7806 : 2012
|
Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
|
ASTM D 7960 : 2018
|
Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
|
ASTM D 6469 : 2017
|
Standard Guide for Microbial Contamination in Fuels and Fuel Systems
|
ASTM D 8147 : 2017
|
Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
|
ASTM D 7875 : 2014
|
Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
|
ASTM D 6823 : 2008 : R2013
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
|
ASTM D 4800 : 1994 : R2015
|
Standard Guide for Classifying and Specifying Adhesives
|
ASTM D 6710 : 2017
|
Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
|
ASTM D 4293 : 2015 : EDT 1
|
Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
|
ASTM B 963 : 2017
|
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
|
ASTM D 6871 : 2017
|
Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
|
ASTM D 3338/D3338M : 2009 : R2014 : EDT 2
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
|
ASTM D 3142/D3142M : 2017
|
Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
|
ASTM D 6074 : 2015
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
|
ASTM D 7719 : 2018
|
Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
|
ASTM D 5769 : 2015
|
Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
|
ASTM D 3487 : 2016 : EDT 1
|
Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
|
ASTM D 3288/D3288M : 2015
|
Standard Test Methods for Magnet-Wire Enamels
|
ASTM D 6201 : 2018 : REV A
|
Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
|
ASTM D 7797 : 2018
|
Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
|
ASTM D 6923 : 2018
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
|
ASTM D 2501 : 2014 : R2019
|
Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
|
ASTM D 396 : 2019
|
Standard Specification for Fuel Oils
|
ASTM D 7826 : 2019
|
Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
|
ASTM E 126 : 2019
|
Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
|
ASTM D 5622 : 2017
|
Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
|
ASTM D 6304 : 2016 : EDT 1
|
Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
|
ASTM D 7665 : 2017
|
Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
|
ASTM D 4052 : 2018 : REV A
|
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
|
ASTM D 1405/D1405M : 2008 : R2013
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
|
ASTM D 3120 : 2008 : R2019
|
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
|
ASTM D 7371 : 2014
|
Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
|
ASTM D 7862 : 2019
|
Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
|
ASTM D 5222 : 2016
|
Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
|
ASTM D 6560 : 2017
|
Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
|
ASTM D 4737 : 2010 : R2016
|
Standard Test Method for Calculated Cetane Index by Four Variable Equation
|
ASTM D 1903 : 2008 : R2017
|
Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
|
ASTM D 3827 : 1992 : R2012
|
Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
|
ASTM D 7547 : 2018 : REV A
|
Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
|
ASTM D 7666 : 2012
|
Standard Specification for Triglyceride Burner Fuel
|
ASTM D 7576 : 2016
|
Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
|
ASTM D 287 : 2012 : REV B
|
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
ASTM D 6822 : 2012 : REV B : R2017
|
Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
|
ASTM D 6227 : 2018
|
Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
|
ASTM D 8256 : 2019
|
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
|
ASTM D 7861 : 2014 : R2019
|
Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
|
ASTM D 5501 : 2012 : R2016
|
Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
|
ASTM D 4054 : 2019
|
Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
|
ASTM D 3227 : 2016
|
Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
|
ASTM D 3343 : 2016
|
Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
|
ASTM D 5986 : 1996 : R2015
|
Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf >–C<inf> 12</inf> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
|
ASTM D 6750 : 2019
|
Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
|
ASTM D 2225 : 2004 : R2012
|
Standard Test Methods for Silicone Fluids Used for Electrical Insulation
|
ASTM D 5372 : 2017
|
Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
|
ASTM D 7863 : 2017
|
Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
|
ASTM D 1160 : 2018
|
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
|
ASTM D 6136/D6136M : 2015
|
Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method
|
ASTM D 4814 : 2019
|
Standard Specification for Automotive Spark-Ignition Engine Fuel
|
ASTM D 2226 : 1993 : R2018
|
Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
|
ASTM D 6448 : 2016
|
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
|
ASTM D 7223 : 2017
|
Standard Specification for Aviation Certification Turbine Fuel
|
ASTM D 4815 : 2015 : REV B
|
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
|
ASTM D 1655 : 2019
|
Standard Specification for Aviation Turbine Fuels
|
ASTM D 4629 : 2017
|
Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
|
ASTM D 7416 : 2009 : R2015
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
|
ASTM D 2892 : 2018 : REV A
|
Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
|
ASTM D 483 : 2004 : R2018
|
Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils (Withdrawn 2024)
|
ASTM D 4056 : 2016
|
Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
|
ASTM D 6224 : 2016
|
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
|
ASTM D 4652 : 2005 : R2012
|
Standard Specification for Silicone Fluid Used for Electrical Insulation
|
ASTM D 117 : 2018
|
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
|
ASTM D 4790 : 2014
|
Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
|
ASTM D 4868 : 2017
|
Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
|
ASTM F 631 : 2015
|
Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
|
ASTM D 4806 : 2019
|
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
|
ASTM D 7566 : 2019
|
Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
|
ASTM D 910 : 2017 : REV A
|
Standard Specification for Leaded Aviation Gasolines
|
ASTM D 7044 : 2015
|
Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)
|
ASTM D 4529 : 2017
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
|
ASTM D 8150 : 2017
|
Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
|
ASTM D 4552/D4552M : 2010 : R2016 : EDT 1
|
Standard Practice for Classifying Hot-Mix Recycling Agents
|
ASTM D 2779 : 1992 : R2012
|
Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
|
ASTM D 7041 : 2016
|
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
|
ASTM D 7620 : 2010 : R2015
|
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
|
ASTM F 3350 : 2018
|
Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
|
ASTM D 5845 : 2001 : R2016
|
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and <emph type="ital">tert</emph>-Butanol in Gasoline by Infrared Spectroscopy
|
ASTM D 976 : 2006 : R2016
|
Standard Test Method for Calculated Cetane Index of Distillate Fuels
|