Skip to content
Please enter a keyword to search

  • CSA C22.3 No. 61936-1 : 2008

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES

    Available format(s):  Hardcopy, PDF

    Superseded date:  09-08-2021

    Language(s):  English

    Published date:  01-01-2015

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Definitions
    4 Fundamental requirements
    5 Insulation
    6 Equipment
    7 Installations
    8 Safety measures
    9 Protection, control and auxiliary systems
    10 Earthing systems
    11 Inspection and testing
    Annex A (normative) - Values of rated insulation levels and
            minimum clearances based on current practice in some
            countries
    Annex B (informative) - Typical touch voltage limits
    Annex C (normative ) - Earthing system design flow chart
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines requirements for the design and the erection of electrical power installations (stations) in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide for safety of persons and proper functioning of the installation.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Product Note Reconfirmed EN
    Publisher Canadian Standards Association
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
    IEC 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing
    IEC 60038:2009 IEC standard voltages
    CSA C71.2 : 1998 INSULATION COORDINATION - PART 2: APPLICATION GUIDE
    IEEE C37 : 1995 COMPLETE EDITION OF CURRENT STANDARDS PUBLISHED BY THE IEEE AND ANSI ON CIRCUIT BREAKERS, SWITCHGEAR, SUBSTATIONS, AND FUSES
    IEEE C37.90-2005 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
    IEC GUIDE 107:2014 Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications
    IEC TS 60479-1:2005+AMD1:2016 CSV Effects of current on human beings and livestock - Part 1: Generalaspects
    IEC 60826:2017 Design criteria of overhead transmission lines
    CSA C22 NO. 4 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    C88-16 Power transformers and reactors
    IEC 60331-31:2002 Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1 kV
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    IEC 60050-605:1983 International Electrotechnical Vocabulary (IEV) - Part 605: Generation, transmission and distribution of electricity - Substations
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    CAN/CSA-C50-14 (R2018) Mineral insulating oil, electrical, for transformers and switches
    IEC 60721-2-7:1987 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Fauna and flora
    IEC 60050-411:1996 International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
    IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
    CSA C22.2 No. 31 : 2014 SWITCHGEAR ASSEMBLIES
    IEC 60949:1988 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
    IEC 61100:1992 Classification of insulating liquids according to fire-point and net calorific value
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
    C9-17 Dry-type transformers
    IEC 60517:1990 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
    IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
    IEEE C57.12.90-2010 LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEC 60721-2-2:2012 Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEC 60865-1:2011 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
    IEC 60721-2-6:1990 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
    IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEC 60044-6:1992 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
    IEC 61330:1995 High-voltage/low voltage prefabricated substations
    IEEE 80-2013 GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ANSI C37.121 : 2012 AMERICAN NATIONAL STANDARD FOR SWITCHGEAR - UNIT SUBSTATIONS - REQUIREMENTS
    ISO 1996-1:2016 Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
    IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 60909:1988 Short-circuit current calculation in three-phase a.c. systems
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
    IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    IEEE 980-2013 GUIDE FOR CONTAINMENT AND CONTROL OF OIL SPILLS IN SUBSTATIONS
    IEC 60721-2-4:1987+AMD1:1988 CSV Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
    IEEE C95.6:2002 IEEE STANDARD FOR SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS 0 TO 3 KHZ
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
    IEC 60364-4-42:2010+AMD1:2014 CSV Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    CSA C71.1 : 1999 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
    IEEE 693-2005 SEISMIC DESIGN OF SUBSTATIONS
    IEC 60721-2-3:2013 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
    IEC 60298:1990 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective