• CSA C22.3 No. 61936-1 : 2008 : R2015

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES

    Available format(s):  Hardcopy, PDF

    Withdrawn date:  09-08-2021

    Language(s):  English

    Published date:  01-01-2015

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Definitions
    4 Fundamental requirements
    5 Insulation
    6 Equipment
    7 Installations
    8 Safety measures
    9 Protection, control and auxiliary systems
    10 Earthing systems
    11 Inspection and testing
    Annex A (normative) - Values of rated insulation levels and
            minimum clearances based on current practice in some
            countries
    Annex B (informative) - Typical touch voltage limits
    Annex C (normative ) - Earthing system design flow chart
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines requirements for the design and the erection of electrical power installations (stations) in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide for safety of persons and proper functioning of the installation.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Product Note Reconfirmed EN
    Publisher Canadian Standards Association
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
    IEC 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing
    IEC 60038:2009 IEC standard voltages
    CSA C71.2 : 1998 INSULATION COORDINATION - PART 2: APPLICATION GUIDE
    IEEE C37 : 1995 COMPLETE EDITION OF CURRENT STANDARDS PUBLISHED BY THE IEEE AND ANSI ON CIRCUIT BREAKERS, SWITCHGEAR, SUBSTATIONS, AND FUSES
    IEEE C37.90:2005 RELAYS AND RELAY SYSTEMS ASSOCIATED WITH ELECTRIC POWER APPARATUS
    IEC GUIDE 107:2014 Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications
    IEC TS 60479-1:2005+AMD1:2016 CSV Effects of current on human beings and livestock - Part 1: Generalaspects
    IEC 60826:2017 Design criteria of overhead transmission lines
    CSA C22 NO. 4 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    C88-16 Power transformers and reactors
    IEC 60331-31:2002 Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1 kV
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    IEC 60050-605:1983 International Electrotechnical Vocabulary (IEV) - Part 605: Generation, transmission and distribution of electricity - Substations
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    CAN/CSA-C50-14 (R2018) Mineral insulating oil, electrical, for transformers and switches
    IEC 60721-2-7:1987 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Fauna and flora
    IEC 60050-411:1996 International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
    IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
    CSA C22.2 No. 31 : 2014 SWITCHGEAR ASSEMBLIES
    IEC 60949:1988 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
    IEC 61100:1992 Classification of insulating liquids according to fire-point and net calorific value
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
    C9-17 Dry-type transformers
    IEC 60517:1990 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
    IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
    IEEE C57.12.90 : 2010 LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEC 60721-2-2:2012 Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEC 60865-1:2011 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
    IEC 60721-2-6:1990 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
    IEC 60044-6:1992 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
    IEC 61330:1995 High-voltage/low voltage prefabricated substations
    IEEE 80 : 2013 GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ANSI C37.121 : 2012 AMERICAN NATIONAL STANDARD FOR SWITCHGEAR - UNIT SUBSTATIONS - REQUIREMENTS
    ISO 1996-1:2016 Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
    IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 60909:1988 Short-circuit current calculation in three-phase a.c. systems
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
    IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    IEC 60721-2-4:1987+AMD1:1988 CSV Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
    IEEE C95.6:2002 IEEE STANDARD FOR SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS 0 TO 3 KHZ
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
    IEC 60364-4-42:2010+AMD1:2014 CSV Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    CSA C71.1 : 1999 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
    IEEE 693 : 2005 SEISMIC DESIGN OF SUBSTATIONS
    IEC 60721-2-3:2013 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
    IEC 60298:1990 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective