IEC 60850:2014
Current
Current
The latest, up-to-date edition.
Railway applications - Supply voltages of traction systems
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
12-11-2014
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Voltages and frequencies of traction systems
5 Testing
6 Test methodology
Annex A (normative) - Maximum value of voltage
U according to duration
Annex B (normative) - Alternative values of traction
power supply systems
Annex C (informative) - Changes, interruptions and
distortion of voltages
Bibliography
IEC 60850:2014 specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications:
- railways;
- guided mass transport systems such as tramways, light trains, elevated and underground railways and trolleybus systems;
- rail bound material transportation systems, e.g. for coal or iron-ore. This standard is also applicable for low speed maglev trains or linear motor transport systems. This new edition includes the following significant technical changes with respect to the previous edition:
- some definitions in Clause 3 clarified;
- Subclause 4.1 completed;
- Table 1 modified;
- Annex B modified with new Table B.1.
| Committee |
TC 9
|
| DevelopmentNote |
Stability date: 2017. (11/2014)
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60850 : 2000 PR | Identical |
| BS 7571:1992 | Identical |
| BS 173:1980 | Similar to |
| NEN 10850 : 1990 | Identical |
| CEI EN 60077-3 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D/C/ CIRCUIT-BREAKERS |
| CEI EN 60349-4 : 2014 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
| BS EN 60349-1:2010 | Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors |
| 16/30296073 DC : 0 | BS EN 62924 ED 1.0 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS |
| IEEE 1653.3-2012 | IEEE Guide for Rail Transit Traction Power Systems Modeling |
| BS EN 62924:2017 | Railway applications. Fixed installations. Stationary energy storage system for DC traction systems |
| 10/30235845 DC : 0 | BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| 10/30211766 DC : 0 | BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITOR |
| BS EN 50123-7-3:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices |
| PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| PD CLC/TS 50238-2:2015 | Railway applications. Compatibility between rolling stock and train detection systems Compatibility with track circuits |
| 15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS EN 60077-2:2017 | Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules |
| BS EN 61287-1:2014 | Railway applications. Power converters installed on board rolling stock Characteristics and test methods |
| NF EN 62621 : 2017 AMD 1 2018 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS |
| I.S. EN 62621:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS |
| BS EN 61881-3 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| I.S. EN 50123-1:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL |
| IEC 62427:2007 | Railway applications - Compatibility between rolling stock and train detection systems |
| IEC 62497-2:2010 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| BS EN 50123-7-2:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
| UNE-EN 61287-1:2015 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| IEC 62128-3:2013 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems |
| IEC 62497-1:2010+AMD1:2013 CSV | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment |
| EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| IEC 61133:2016 RLV | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| NF EN 60077-4 : 2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| EN 60077-3:2002 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
| NF EN 60077-3 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: RULES FOR DC CIRCUIT-BREAKERS |
| EN 61881-2 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012) |
| I.S. EN 50123-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| UNE-EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| BS EN 50463-1:2017 | Railway applications. Energy measurement on board trains General |
| BS EN 60349-4:2013 | Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter |
| 15/30288088 DC : DRAFT FEB 2015 | BS EN 62864-1 ED 1.0 - RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| EN 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| 11/30215604 DC : 0 | BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 11/30230287 DC : 0 | BS IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINES VEHICLES |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| BS EN 60077-4:2003 | Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for AC circuit-breakers |
| 10/30196657 DC : 0 | BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE |
| IEC 62128-2:2013 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems |
| 12/30247714 DC | BS IEC 62128-2. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 2. Provisions against the effects of stray currents caused by d.c. traction systems |
| 15/30329543 DC : 0 | BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| 00/243316 DC : DRAFT JUL 2000 | IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| BS EN 61377:1997 | Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control |
| 00/243317 DC : DRAFT JUL 2000 | |
| 05/30133277 DC : DRAFT MAY 2005 | |
| EN 50123-7-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| IEC 62928:2017 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| IEC 62695:2014 | Railway applications - Fixed installations - Traction transformers |
| IEC 61992-7-3:2006 | Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| BS EN 62621 : 2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS (IEC 62621:2011) |
| I.S. EN 50123-4:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| UNE-EN 62520:2012 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
| EN 50463-1:2017 | Railway applications - Energy measurement on board trains - Part 1: General |
| I.S. EN 60310:2016 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| I.S. EN 60077-5:2003 | RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| IEC 62505-2:2016 | Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
| CEI EN 60349-1 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| CEI EN 61881-2 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE |
| EN IEC 62928:2018 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| CLC/TR 50488:2006 | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
| IEC 62590:2010 | Railway applications - Fixed installations - Electronic power converters for substations |
| I.S. EN 50123-7-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES |
| IEC 62313:2009 | Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock |
| I.S. EN 61377-3:2003 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM |
| IEC 61992-3:2006+AMD1:2015 CSV | Railway applications - Fixed installations - DC switchgear - Part 3:Indoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 60349-2:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| UNE-EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| 13/30264553 DC : 0 | BS EN 61287-1 ED 3.0 - RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| 09/30182105 DC : 0 | BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| BS EN 60349-2:2010 | Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors |
| BS EN 62520:2011 | Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters |
| I.S. EN 60349-1:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
| BS EN 50123-7-1:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide |
| 10/30235844 DC : 0 | BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE |
| BS EN 60077-5:2003 | Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses |
| DIN V ENV 60349-2 : 1994 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| BS EN 61881-2:2012 | Railway applications. Rolling stock equipment. Capacitors for power electronics Aluminium electrolytic capacitors with non solid electrolyte |
| 14/30271248 DC : 0 | BS EN 60310 ED 4.0 - RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| IEC 60571:2012 | Railway applications - Electronic equipment used on rolling stock |
| 14/30288062 DC : 0 | BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| CEI EN 50123-1 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL |
| CEI EN 60077-4 : 2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
| PREN 50463-1 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| I.S. EN 60349-4:2013 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV)) |
| I.S. EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| IEC 62128-1:2013 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock |
| CEI EN 60349-2 : 2012 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| IEC 62505-3-1:2009 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. tractions systems - Application guide |
| BS 173-1:1992 | Electric traction (rail and road vehicles) Specification for rotating electrical machines |
| NF EN 61377-2 : 2003 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL |
| EN 62924:2017 | Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
| I.S. EN 60077-1:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| IEC 62589:2010 | Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups |
| BS EN 61377-2:2002 | Railway applications. Rolling stock Combined testing. Chopper-fed direct current traction motors and their control |
| IEC 60571-1:1990 | Electronic equipment used on rail vehicles. Part 1: General requirements and tests for electronic equipment |
| IEC 61992-1:2006+AMD1:2014 CSV | Railway applications - Fixed installations - DC switchgear - Part 1:General |
| IEC 61992-4:2006+AMD1:2015 CSV | Railway applications - Fixed installations - DC switchgear - Part 4:Outdoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 60077-3:2001 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
| IEC 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 62724:2013 | Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines |
| UNE-EN 60349-2:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors |
| IEC 61881-3:2012+AMD1:2013 CSV | Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| EN 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| IEC 61992-2:2006+AMD1:2014 CSV | Railway applications - Fixed installations - DC switchgear - Part 2:DC circuit-breakers |
| I.S. EN 61377:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| I.S. EN 62520:2011 | RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS |
| IEC 60077-5:2003 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| 11/30247723 DC : 0 | BS IEC 60571 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| BS EN 50123-2:2003 | Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers |
| 03/306438 DC : DRAFT APR 2003 | IEC 61133 ED. 2 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| 18/30363296 DC : 0 | BS EN 60077-4 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| CEI CLC/TR 50488 : 2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES |
| BS EN 61377-1:2006 | Railway applications. Rolling stock Combined testing of inverter-fed alternating current motors and their control system |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| 16/30296085 DC : 0 | BS EN 60077-2 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| IEC 60494-1:2013 | Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles |
| BS EN 60310:2016 | Railway applications. Traction transformers and inductors on board rolling stock |
| IEC 62505-3-3:2009 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase inductive voltage transformers |
| I.S. EN 62864-1:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| IEC 60494-2:2013 | Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| UNE-EN 62924:2017 | Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
| CEI EN 62924 : 1ED 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS |
| I.S. EN 61881-3:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV)) |
| I.S. EN 50123-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS |
| UNE-EN 62864-1:2017 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| IEC 62888-1:2018 | Railway applications - Energy measurement on board trains - Part 1: General |
| IEC 62848-1:2016 | Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps |
| IEC 62505-1:2016 | Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV |
| I.S. EN 50123-7-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES |
| IEC 62505-3-2:2009 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase current transformers |
| IEC 60913:2013 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| I.S. EN 60077-3:2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D.C. CIRCUIT-BREAKERS |
| IEC 62621:2011 | Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| 16/30296081 DC : 0 | BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| UNE-EN 62621:2016 | Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems |
| IEC 61881-2:2012 | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non-solid electrolyte |
| IEC 61377-2:2002 | Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61377-1:2006 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
| IEC 61377-3:2002 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| IEC 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 62520:2011 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
| IEC 60349-4:2012 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
| IEC 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
| BS EN 60077-1:2017 | Railway applications. Electric equipment for rolling stock General service conditions and general rules |
| UNE-EN 60349-1:2011 | Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors |
| EN 50123-7-3:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| 11/30230291 DC : 0 | BS IEC 60494-2 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| BS EN 61377-3:2002 | Railway applications. Rolling stock Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| IEC 60349:1991 | Electric traction. Rotating electrical machines for rail and road vehicles |
| CEI EN 60077-5 : 2004 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| 12/30247717 DC : 0 | IEC 62128-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF AC AND DC TRACTION SYSTEMS |
| 09/30166871 DC : 0 | BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS |
| 03/306439 DC : DRAFT APR 2003 | IEC 61377-1 ED. 1 - ELECTRIC TRACTION - ROLLING STOCK - COMBINED TESTING - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL |
| I.S. EN 50463-1:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| I.S. EN 61287-1:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| CEI EN 60310 : 2016 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| 11/30206274 DC : 0 | BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
| 09/30182101 DC : 0 | BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS |
| S.R. CLC TR 50488:2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES |
| BS EN 60077-3:2002 | Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for d.c. circuit-breakers |
| NF EN 61377-1 : 2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL |
| IEEE 1887-2017 | IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications |
| I.S. EN 61377-1:2007 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| I.S. EN 62924:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS |
| I.S. EN 61881-2:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012 (EQV)) |
| I.S. EN IEC 62928:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES |
| IEEE DRAFT 1476 : D4.1 NOV 99 | DRAFT STANDARD FOR PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES |
| S.R. CLC/TS 50238-2:2015 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS |
| NF EN 61377-3 : 2003 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM |
| I.S. EN 60077-4:2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| IEC 62924:2017 | Railway applications - Fixed installations - Stationary energy storage system for DC traction systems |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| I.S. EN 60077-2:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| IEC 62888-2:2018 | Railway applications - Energy measurement on board trains - Part 2: Energy measurement |
| IEC 62498-1:2010 | Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
| I.S. EN 61377-2:2002 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| CLC/TS 50238-2 : 2015 COR 2016 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS |
| 12/30251569 DC | BS IEC 62128-1. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 1. Protective provisions against electric shock |
| IEC 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| EN 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| EN 50123-7-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| EN 61377-1:2006/corrigendum:2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| EN 50123-4:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 50123-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers |
| EN 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
| IEC 60077-2:2017 RLV | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 60077-1:2017 RLV | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction Systems |
| EN 61377-2:2002 | Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| EN 61377-3:2002 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| EN 60310:2016/AC:2018-03 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK (IEC 60310:2016/COR1:2018) |
| EN 62621:2016/A1:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS |
| EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| EN 62520:2011 | Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters |
| EN 50123-3:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| IEC 60038:2009 | IEC standard voltages |
| EN 50124-2:2017 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| IEC 62128-1:2013 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| IEEE 16-2004 | IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles |
| IEC 60913:2013 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| IEC 62497-2:2010 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| EN 50388 : 2012 COR 2013 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| IEC 62313:2009 | Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock |
| UIC 550-2 : 1ED 1994 | POWER SUPPLY SYSTEMS FOR PASSENGER COACHES - TYPE TESTING |
| UIC 550 : 11ED 2005 | POWER SUPPLY INSTALLATIONS FOR PASSENGER STOCK |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.