![header thumbnail](/images/publishers\ieee_cover.gif)
IEEE 142 : 2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/publishers\ieee_cover.gif)
GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
Hardcopy , PDF
17-03-2023
English
30-11-2007
Chapter 1 - System grounding
1.1 Introduction
1.2 Definitions
1.3 Purposes of system grounding
1.4 Methods of system neutral grounding
1.5 Obtaining the system neutral
1.6 Location of system grounding points
1.7 Grounding of industrial and commercial generators
1.8 Autotransformers
1.9 System grounding for uninterruptible power systems
1.10 Portable mining equipment supply systems
1.11 Creation of stray currents and potentials
1.12 Avoiding common-mode noise
1.13 Limiting transferred earth potentials
1.14 "Resonantly" produced voltages
1.15 Grounding of dc power systems
1.16 Normative references
1.17 Bibliography
Chapter 2 - Equipment grounding
2.1 Basic objectives
2.2 Fundamental concepts
2.3 Equipment grounding as influenced by type of use
2.4 Outdoor open-frame substations
2.5 Unit substations
2.6 Installations serving heavy portable electric machinery
2.7 Interior wiring systems
2.8 Interior unit substations and switching centers
2.9 Utilization equipment
2.10 Normative references
2.11 Bibliography
Chapter 3 - Static and lightning protection grounding
3.1 Introduction
3.2 Static grounding
3.3 Lightning protection grounding
3.4 Normative references
3.5 Bibliography
Chapter 4 - Connection to earth
4.1 Resistance to earth
4.2 Ground electrodes
4.3 Methods and techniques of construction
4.4 Measurement of resistance to earth
4.5 Normative references
Chapter 5 - Electronic equipment grounding
5.1 Introduction
5.2 Definitions
5.3 History of computer grounding
5.4 System or equipment to be grounded
5.5 Grounding electronic equipment
5.6 Effects of internal rectifiers in computers
5.7 Grounding of shields
5.8 Interference from radio frequencies
5.9 Case histories
5.10 Normative references
5.11 Bibliography
Index
The scope of this document is to provide concensus of the expertize on the subject of grounding of industrial and commercial power systems, equipemnt, lightning protection, connection to earth and computer system grounding.
DocumentType |
Standard
|
ISBN |
978-0-7381-5640-8
|
Pages |
225
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Withdrawn
|
Supersedes |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
16/30337938 DC : 0 | BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
IEEE 741-2007 | IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
FIPS PUB 94 : 0 | GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS |
IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
IEEE DRAFT 1050 : 0 | INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS |
IEEE C37.113-1999 | IEEE Guide for Protective Relay Applications to Transmission Lines |
CSA C293.2 : 2017 | STANDARD FOR SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - APPLICATION GUIDE FOR DESIGN, INSTALLATION, TESTING, COMMISSIONING, AND MAINTENANCE |
IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
IEEE 844.2/CSA C293.2-2017 | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance |
PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
MIL-HDBK-1004-6 Base Document:1986 | LIGHTNING PROTECTION |
IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
IEEE C57.13.3-2014 REDLINE | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
IEEE C37.302-2015 | IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC |
IEEE DRAFT 80 : D14 JUN 99 | DRAFT GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING |
IEEE DRAFT C57.13.3 : D9 2005 | GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES |
NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
IEEE DRAFT C37.108 : D6 98 | DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS |
IEC PAS 80005-3:2014 | Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements |
IEEE 3004.5-2014 | IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems |
ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
NEMA ST 20:2014 | Dry Type Transformers for General Applications |
UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
UFC 3-575-01 : 2012 | UNIFIED FACILITIES CRITERIA - LIGHTNING AND STATIC ELECTRICITY PROTECTION SYSTEMS |
NEMA SG 6:2000 | POWER SWITCHING EQUIPMENT |
IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
IEEE DRAFT C37.91 : D7.0 2006 | PROTECTING POWER TRANSFORMERS |
IEEE DRAFT C37.102 : D8 2006 | AC GENERATOR PROTECTION |
IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEEE 1547.2 : 2008 | APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS |
IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
IEEE C62.92.6-2017 | IEEE Guide for Application of Neutral Grounding in Electrical Utility Systems, Part VI--Systems Supplied by Current-Regulated Sources |
IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
IEEE C62.72-2007 | IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
IEEE 3001.2:2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
IEEE C57.158-2017 | IEEE Guide for the Application of Tertiary and Stabilizing Windings in Power Transformers |
IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
CSA C22.4 PACKAGE : 2009 | CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS |
IEEE 81-2012 | IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System |
BS ISO/IEC/IEEE 80005-1:2012 | Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements |
IEEE DRAFT 551 : D5 2005 | CALCULATING AC SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
PD IEC/PAS 80005-3:2014 | Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements |
IEEE C37.32-2002 | American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings, Construction Guidelines, and Specifications |
UFC 3-260-01 : 2008 | UNIFIED FACILITIES CRITERIA - AIRFIELD AND HELIPORT PLANNING AND DESIGN. |
IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
IEEE C62.92.5-2009 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems |
IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
IEEE 463-2013 REDLINE | IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
ASCE T&DI 21.3 : 2008 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
ASCE 21 00 : 2002 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
ABS 0057 : 2017 COR 2017 | GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
IEEE 45.3-2015 | IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
IEEE DRAFT 741 : D1 2006 | CRITERIA FOR THE PROTECTION OF CLASS 1E POWER SYSTEMS AND EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS |
CSA C22.4 No. 1 : 2009(R2018) | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE |
IEEE C62.92.3-2012 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems |
IEEE C62.44-2016 | IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment) |
IEEE 487-2015 | IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations |
IEEE 3003.2-2014 | IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems |
IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
ASCE T&DI 21 13 : 2013 | AUTOMATED PEOPLE MOVER STANDARDS |
IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
IEC/ISO/IEEE 80005-1:2012 | Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements |
IEEE C37.20.1-2015 REDLINE | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
IEEE C37.21-2005 | IEEE Standard for Control Switchboards |
IEEE C62.34 : 1996 | TEST METHODS AND PERFORMANCE OF LOW-VOLTAGE (1000 V RMS OR LESS) SURGE PROTECTIVE DEVICES USED ON SECONDARY DISTRIBUTION SYSTEMS (BETWEEN THE TRANSFORMER LOW-VOLTAGE TERMINALS AND THE LINE SIDE OF THE SERVICE EQUIPMENT) |
IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
PIP ELCGL01:2023 | Electrical Design Criteria |
IEC 61024-1:1990 | Protection of structures against lightning - Part 1: General principles |
IEEE 487-2015 | IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations |
IEEE 81-2012 | IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System |
IEEE 837-2014 REDLINE | IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
IEEE 463-2013 REDLINE | IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
IEEE 367-2012 | IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.