ISO 3506-1:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
06-04-2020
Superseded by
Language(s)
English, French
Published date
29-10-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3506-1:2009 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 C to 35 C. Properties vary at higher or lower temperatures.
ISO 3506-1:2009 applies to bolts, screws and studs
- with nominal thread diameter d 39 mm,
- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262, and
- of any shape.
It does not apply to screws with special properties, such as weldability.
| DevelopmentNote |
Supersedes ISO 3506 (04/2001) DRAFT ISO/DIS 3506-1 is also available for this standard. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS B 1054-1:2013 | Identical |
| ONORM EN ISO 3506-1 : 2010 | Identical |
| EN ISO 3506-1:2009 | Identical |
| NS EN ISO 3506-1 : 2009 | Identical |
| NBN EN ISO 3506-1 : 2010 | Identical |
| GOST R ISO 3506-1 : 2009 | Identical |
| UNI EN ISO 3506-1 : 2010 | Identical |
| IS 1367 : Part 14 : Sec 1 : 2018 | Identical |
| BS EN ISO 3506-1:2009 | Identical |
| NF EN ISO 3506-1 : 2010 | Identical |
| DIN EN ISO 3506-1:2010-04 | Identical |
| I.S. EN ISO 3506-1:2009 | Identical |
| SN EN ISO 3506-1 : 2010 | Identical |
| NEN EN ISO 3506-1 : 2009 | Identical |
| PN EN ISO 3506-1 : 2009 | Identical |
| BIS IS 1367-14-1 : 2002 | Identical |
| UNE-EN ISO 3506-1:2010 | Identical |
| BIS IS 1367-14-2 : 2002 | Identical |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| 03/319820 DC : DRAFT DEC 2003 | EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED |
| 07/30159562 DC : 0 | BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN ISO 2338:1998 | PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL |
| CEI EN 50216-9 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| I.S. EN ISO 8739:1998 | GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH PILOT |
| I.S. EN ISO 8744:1998 | GROOVED PINS - FULL-LENGTH TAPER GROOVED |
| 09/30202626 DC : 0 | BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| MIL-PRF-32307 Revision A:2017 | VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 16/30341810 DC : 0 | BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| 16/30341790 DC : 0 | BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN 16271:2004-07 | PN 250 and PN 400 valves with test connection for pressure gauges |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| BS EN 50216-10:2009 | Power transformer and reactor fittings Oil-to-air heat exchangers |
| UNE-EN ISO 12474:2011 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| PREN 50119 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A |
| 04/30113739 DC : DRAFT DEC 2004 | EN ISO 13503-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 5: PROCEDURES FOR MEASURING THE LONG TERM CONDUCTIVITY OF PROPPANTS |
| BIS IS 2269 : 2006 | HEXAGON SOCKET HEAD CAP SCREWS |
| NF EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| UNE-EN 15048-1:2018 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
| ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| 13/30286967 DC : 0 | BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| UNE-EN ISO 12215-9:2013 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| UNI EN ISO 8676 : 2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| MSS SP 124 : 2016 | FABRICATED TAPPING SLEEVES |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| EN 15048-1:2016 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| IEC 60335-2-37:2017 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers |
| I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| DIN EN ISO 7045:2011-12 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| BS EN ISO 4762:2004 | Hexagon socket head cap screws |
| UNE-EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| BS EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess. Product grade A |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN ISO 14579:2011 | Hexalobular socket head cap screws |
| BS EN 1662:1998 | Hexagon bolts with flange. Small series |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| I.S. EN ISO 21269:2004 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| I.S. EN ISO 2010:2011 | SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011) |
| I.S. EN ISO 7045:2011 | PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011) |
| I.S. EN ISO 4014:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| DIN EN ISO 4017:2015-05 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| UNI EN 12516-2 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| DIN EN ISO 15983:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - A2/A2 |
| DIN EN ISO 16048:2003-06 | PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS |
| EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
| ONORM EN 15001-1 : 2011 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| ONORM EN ISO 14581 : 2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013) |
| ONORM EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011) |
| DIN EN ISO 14581:2014-02 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| DIN EN 1662:1998-02 | Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) |
| 09/30203245 DC : 0 | BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B) |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| 11/30246933 DC : 0 | BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| I.S. EN ISO 7380-1:2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN ISO 8734:1998 | PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS) |
| I.S. EN ISO 8735:1998 | PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL |
| I.S. EN ISO 8741:1998 | GROOVED PINS - HALF-LENGTH REVERSE-TAPER GROOVED |
| BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
| 09/30208217 DC : 0 | BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 17/30341013 DC : DRAFT AUG 2017 | BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| DIN 3015-2:1999-01 | Fastening clamps - Block clamps - Part 2: Heavy duty (S) |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| DIN 3015-1:1999-01 | Fastening clamps - Block clamps - Part 1: Light duty (L) |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| 11/30249108 DC : 0 | BS EN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS ISO 28921-1 : 2013 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| I.S. EN 50216-9:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN 3015-3:1999-01 | Fastening clamps - Block clamps - Part 3: Double clamps (Z) |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread Small series Product grade A |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| I.S. EN ISO 12215-9:2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| I.S. EN ISO 12474:2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| I.S. EN 15048-1:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| PREN ISO 1207 : DRAFT 2009 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 12215-9 : 2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| UNI EN ISO 7048 : 2011 | CROSS-RECESSED CHEESE HEAD SCREWS |
| I.S. EN 50216-10:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| UNE-EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| ISO 7092:2000 | Plain washers Small series Product grade A |
| UNE-EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| UNE-EN 12516-2:2016 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| BS EN ISO 8735:1998 | Parallel pins with internal thread, of hardened steel or martensitic stainless steel |
| BS EN ISO 8740:1998 | Grooved pins. Full-length parallel grooved, with chamfer |
| BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
| BS EN 15048-1:2007 | Non-preloaded structural bolting assemblies General requirements |
| BS EN ISO 8733:1998 | Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| UNE-EN ISO 2010:2012 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| BS EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A |
| BS EN 1665:1997 | Hexagon bolts with flange. Heavy series |
| I.S. EN 12516-2:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| I.S. EN ISO 14583:2011 | HEXALOBULAR SOCKET PAN HEAD SCREWS |
| I.S. EN ISO 4762:2004 | HEXAGON SOCKET HEAD CAP SCREWS |
| DIN EN ISO 7046-2:2011-12 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN ISO 8676:2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| ONORM EN 1993-1-4 : 2015 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN ISO 7047:2011 | RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011) |
| I.S. EN ISO 7046-2:2011 | COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011) |
| I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| I.S. EN ISO 4017:2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014) |
| I.S. EN ISO 14579:2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| I.S. EN ISO 1580:2011 | SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011) |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN ISO 14580:2011 | HEXALOBULAR SOCKET CHEESE HEAD SCREWS |
| I.S. EN ISO 8765:2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| I.S. EN ISO 14584:2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN ISO 1207:2011 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| I.S. EN ISO 2009:2011 | SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011) |
| I.S. EN ISO 7048:2011 | CROSS-RECESSED CHEESE HEAD SCREWS |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| ONORM EN ISO 8676 : 2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| ONORM EN ISO 4017 : 2015 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014) |
| NF EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| NF EN ISO 8676 : 2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| NF EN ISO 8765 : 2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| ONORM EN ISO 8765 : 2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| ONORM EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| 18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
| BS ISO 4162:2012 | Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B |
| 10/30191247 DC : DRAFT APR 2010 | BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 16/30341798 DC : 0 | BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM |
| I.S. EN ISO 8742:1998 | GROOVED PINS - ONE-THIRD-LENGTH CENTRE GROOVED |
| I.S. EN ISO 8743:1998 | GROOVED PINS - HALF-LENGTH CENTRE GROOVED |
| BS EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| NF EN 50216-10 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| ONORM EN 1515-4 : 2010 | FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG |
| 17/30347443 DC : DRAFT JUN 2017 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| API RP 19D:2008/ERR 1:2008(R2015) | MEASURING THE LONG-TERM CONDUCTIVITY OF PROPPANTS |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| I.S. EN ISO 13918:2018 | WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017) |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| UNI EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| ONORM EN ISO 12215-9 : 2013 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN ISO 13918:2018 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| DIN EN ISO 7047:2011-12 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| DIN EN ISO 7048:2011-07 | Cross-recessed cheese head screws (ISO 7048:2011) |
| UNE-EN ISO 4017:2015 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004) |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| DIN EN ISO 1580:2011-12 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| BS EN ISO 8739:1998 | Grooved pins. Full-length parallel grooved, with pilot |
| BS EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| UNE-EN ISO 1580:2012 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| UNE-EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| BS EN ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head. A2/A2 |
| ISO 8741:1997 | Grooved pins Half-length reverse-taper grooved |
| ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head — A2/SSt |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| BS EN ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head. A2/SSt |
| ISO 7048:2011 | Cross-recessed cheese head screws |
| IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ISO 8743:1997 | Grooved pins — Half-length centre grooved |
| UNE-EN ISO 2009:2012 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| ISO 7090:2000 | Plain washers, chamfered Normal series Product grade A |
| UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 8739:1997 | Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
| EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| UNI EN ISO 8765 : 2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| UNI EN ISO 14579 : 2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| UNI EN ISO 13628-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| UNI EN ISO 2009 : 2012 | SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 4017 : 2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B |
| UNI EN ISO 14580 : 2011 | HEXALOBULAR SOCKET CHEESE HEAD SCREWS |
| EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| UNI EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| UNI EN 14219 : 2006 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES |
| UNI EN ISO 7045 : 2012 | PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A |
| UNI EN ISO 2010 : 2012 | SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 14583 : 2011 | HEXALOBULAR SOCKET PAN HEAD SCREWS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN ISO 1207 : 2012 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 7047 : 2012 | RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A |
| UNI EN ISO 1580 : 2012 | SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 7046-2 : 2012 | COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS |
| UNI EN 14420-3 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| UNI EN ISO 14584 : 2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS |
| DIN 16272:2004-07 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| UNI EN ISO 7380-1 : 2012 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| DIN EN ISO 7380-1:2011-11 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| ISO 13918:2017 | Welding — Studs and ceramic ferrules for arc stud welding |
| 11/30245512 DC : 0 | BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS |
| BS EN 50216-9:2009 | Power transformer and reactor fittings Oil-to-water heat exchangers |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| I.S. EN ISO 8733:1998 | PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| 09/30203242 DC : 0 | BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A) |
| I.S. EN ISO 8740:1998 | GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER |
| I.S. EN ISO 8745:1998 | GROOVED PINS - HALF-LENGTH TAPER GROOVED |
| 09/30188143 DC : DRAFT OCT 2009 | BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| BS ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| UNI EN ISO 14581 : 2014 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS |
| 14/30293325 DC : 0 | BS EN ISO 15085 - SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 16/30342991 DC : 0 | BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING |
| 10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS EN ISO 7380-1:2011 | Button head screws Hexagon socket button head screws |
| 04/30123712 DC : DRAFT OCT 2004 | EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: SUITABILITY TEST |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
| DIN 16270:2004-07 | PN 250 and PN 400 valves without test connection for pressure gauges |
| BS EN ISO 12215-9:2012 | Small craft. Hull construction and scantlings Sailing craft appendages |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| I.S. EN ISO 14581:2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013) |
| API 19D:2008 | MEASURING THE LONG-TERM CONDUCTIVITY OF PROPPANTS |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN ISO 12474:2011-01 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN ISO 12215-9:2012 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| UNE-EN ISO 14581:2016 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO 4762:2004 | Hexagon socket head cap screws |
| PREN 1992-4 : DRAFT 2013 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| IEC 60335-2-39:2012+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN ISO 2010:2011-12 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| DIN EN ISO 14584:2011-06 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| DIN EN ISO 2009:2011-12 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| BS EN 1515-3:2005 | Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated |
| UNE-EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| BS EN ISO 8744:1998 | Grooved pins. Full-length taper grooved |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| ISO 7045:2011 | Pan head screws with type H or type Z cross recess Product grade A |
| UNE-EN ISO 7047:2012 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| ISO 14579:2011 | Hexalobular socket head cap screws |
| ISO 8733:1997 | Parallel pins with internal thread, of unhardened steel and austenitic stainless steel |
| BS EN ISO 7090:2000 | Plain washers, chamfered. Normal series. Product grade A |
| BS EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| ISO 8744:1997 | Grooved pins Full-length taper grooved |
| BS EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| BS EN 14219:2003 | Hexagon bolts with flange with metric fine pitch thread. Small series |
| BS EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread. Product grades A and B |
| BS EN ISO 8743:1998 | Grooved pins. Half-length centre grooved |
| BS EN ISO 1207:2011 | Slotted cheese head screws. Product grade A |
| BS EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| UNE-EN ISO 7046-2:2012 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| BS EN 1515-2:2001 | Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| UNE-EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| BS EN ISO 7048:2011 | Cross-recessed cheese head screws |
| IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| ISO 8742:1997 | Grooved pins — One-third-length centre grooved |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| ISO 7380-1:2011 | Button head screws — Part 1: Hexagon socket button head screws |
| ISO 2009:2011 | Slotted countersunk flat head screws Product grade A |
| ISO 13503-5:2006 | Petroleum and natural gas industries — Completion fluids and materials — Part 5: Procedures for measuring the long-term conductivity of proppants |
| IEC 60335-2-99:2003+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| ISO 7093-1:2000 | Plain washers Large series Part 1: Product grade A |
| BS EN ISO 8734:1998 | Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 14581:2013 | Fasteners — Hexalobular socket countersunk flat head screws |
| ISO 8734:1997 | Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) |
| IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| BS EN ISO 8745:1998 | Grooved pins. Half-length taper grooved |
| ISO 8745:1997 | Grooved pins Half-length taper grooved |
| UNE-EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| ISO 8740:1997 | Grooved pins Full-length parallel grooved, with chamfer |
| ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
| ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ISO 1207:2011 | Slotted cheese head screws Product grade A |
| BS EN ISO 1580:2011 | Slotted pan head screws. Product grade A |
| ISO 14580:2011 | Hexalobular socket cheese head screws |
| BS EN ISO 4017:2014 | Fasteners. Hexagon head screws. Product grades A and B |
| BS EN ISO 8742:1998 | Grooved pins. One-third-length centre grooved |
| BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| ISO 1580:2011 | Slotted pan head screws Product grade A |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ISO 8735:1997 | Parallel pins with internal thread, of hardened steel and martensitic stainless steel |
| ISO 14583:2011 | Hexalobular socket pan head screws |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
| BS EN ISO 14583:2011 | Hexalobular socket pan head screws |
| ISO 7089:2000 | Plain washers Normal series Product grade A |
| BS EN 12516-2:2014 | Industrial valves. Shell design strength Calculation method for steel valve shells |
| UNE-EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| BS EN ISO 8741:1998 | Grooved pins. Half-length reverse-taper grooved |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A |
| BS EN ISO 14580:2011 | Hexalobular socket cheese head screws |
| ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head — A2/A2 |
| BS EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread. Product grades A and B |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| DIN EN ISO 14579:2011-06 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
| EN ISO 7089:2000 | Plain washers - Normal series - Product grade A (ISO 7089:2000) |
| EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| EN ISO 8734:1997 | Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| EN ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002) |
| EN ISO 8735:1997 | Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
| EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003) |
| EN ISO 1580:2011 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| ONORM EN 12516-2 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| EN ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002) |
| EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08) |
| EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN ISO 7090:2000 | Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000) |
| EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| EN ISO 7092:2000 | Plain washers - Small series - Product grade A (ISO 7092:2000) |
| EN ISO 7093-1:2000 | Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000) |
| EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| EN ISO 7380-1:2011 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| EN ISO 8743:1997 | Grooved pins - Half-length centre grooved (ISO 8743:1997) |
| EN ISO 2010:2011 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| EN ISO 8745:1997 | Grooved pins - Half-length taper grooved (ISO 8745:1997) |
| EN 1515-3:2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| EN ISO 8741:1997 | Grooved pins - Half-length reverse taper grooved (ISO 8741:1997) |
| EN ISO 14581:2013 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| EN ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) |
| EN ISO 8740:1997 | Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
| EN ISO 2338:1997 | Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| EN ISO 8742:1997 | Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004) |
| EN ISO 2009:2011 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| EN ISO 8744:1997 | Grooved pins - Full-length taper grooved (ISO 8744:1997) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| UNE-EN ISO 7380-1:2012 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| BS EN ISO 14581:2013 | Fasteners. Hexalobular socket countersunk flat head screws |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| NF EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| DIN 19558:2002-12 | WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT |
| DIN 3016-2:2000-06 | FASTENING CLAMPS - PART 2: WITH FASTENING LUGS |
| 16/30341794 DC : 0 | BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| DIN EN ISO 12215-9:2013-01 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| NF EN 50216-9 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| UNE-EN 50216-10:2010 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| CEI EN 50216-10 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| DIN EN ISO 1207:2011-10 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| UNE-EN ISO 7045:2012 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| BS EN ISO 13503-5:2006 | Petroleum and natural gas industries. Completion fluids and materials Procedures for measuring the long term conductivity of proppants |
| ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| BS EN ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head. A2/A2 |
| ISO 21049:2004 | Pumps — Shaft sealing systems for centrifugal and rotary pumps |
| UNE-EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| ISO 2010:2011 | Slotted raised countersunk head screws Product grade A |
| ISO 2338:1997 | Parallel pins, of unhardened steel and austenitic stainless steel |
| BS EN ISO 2009:2011 | Slotted countersunk flat head screws. Product grade A |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 2010:2011 | Slotted raised countersunk head screws. Product grade A |
| BS EN ISO 2338:1998 | Parallel pins of unhardened steel and austenitic stainless steel |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head — A2/A2 |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| DIN EN ISO 15984:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - A2/A2 |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN ISO 14583:2011-06 | Hexalobular socket pan head screws (ISO 14583:2011) |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN ISO 21269:2004-06 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| EN ISO 13503-5:2006 | Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006) |
| DIN EN ISO 4014:2011-06 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN 1515-3:2005-12 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated |
| DIN EN ISO 14580:2011-06 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| EN 50216-10:2009 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| EN 50216-9:2009 | Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
| I.S. EN 12255-1:2002 | WASTEWATER TREATMENT PLANTS - PART 1: GENERAL CONSTRUCTION PRINCIPLES |
| ASME B18.2.5M : 2013 | METRIC 12-POINT FLANGE HEAD SCREWS |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| AS/NZS ISO 13918:2020 | Welding - Studs and ceramic ferrules for arc stud welding |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| AS 3996:2019 | Access covers and grates |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.