ISO/TS 19880-1:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Gaseous hydrogen Fuelling stations Part 1: General requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English
Published date
30-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. Fuel Cell Electric Vehicles).
NOTE These recommendations are in addition to applicable national regulations and codes, which can prohibit certain aspects of this document.
It is applicable to fuelling for light duty hydrogen land vehicles, but it can also be used as guidance for fuelling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storage capacities outside of current published fuelling protocol standards, such as SAE J2601.
Residential applications to fuel land vehicles and non-public demonstration fuelling stations are not included in ISO/TS 19880-1:2016.
It provides guidance on the following elements of a fuelling station:
- hydrogen production/delivery system
- delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;
- on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;
- liquid hydrogen storage;
- hydrogen purification systems, as applicable;
- compression
- gaseous hydrogen compression;
- pumps and vaporizers;
- gaseous hydrogen buffer storage;
- pre-cooling device;
- gaseous hydrogen dispensers.
| DevelopmentNote |
Supersedes ISO TS 20100. (07/2016) DRAFT ISO/DIS 19880-1 is also available for this standard. (12/2017)
|
| DocumentType |
Technical Specification
|
| Pages |
121
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SIS-ISO/TS 19880-1:2016 | Identical |
| PD ISO/TS 19880-1:2016 | Identical |
| PREN 17124 : DRAFT 2017 | HYDROGEN FUEL - PRODUCT SPECIFICATION AND QUALITY ASSURANCE - PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL APPLICATIONS FOR ROAD VEHICLES |
| 17/30358096 DC : 0 | BS EN 17124 - HYDROGEN FUEL - PRODUCT SPECIFICATION AND QUALITY ASSURANCE - PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL APPLICATIONS FOR ROAD VEHICLES |
| 17/30293124 DC : 0 | BS ISO 19880-2 - GASEOUS HYDROGEN - FUELING STATIONS - PART 2: DISPENSERS |
| PREN 17127 : DRAFT 2017 | OUTDOOR HYDROGEN REFUELLING POINTS DISPENSING GASEOUS HYDROGEN AND INCOROPORATING FILLING PROTOCOLS |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| 17/30358352 DC : 0 | BS EN 17127 - OUTDOOR HYDROGEN REFUELLING POINTS DISPENSING GASEOUS HYDROGEN AND INCOROPORATING FILLING PROTOCOLS |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| EN 13458-1:2002 | Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| CSA HGV 4.3 : 2016 | TEST METHODS FOR HYDROGEN FUELING PARAMETER EVALUATION |
| ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
| ASTM D 7651 : 2010 | Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ISO 21010:2014 | Cryogenic vessels Gas/materials compatibility |
| ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| IEC 61340-5-1:2016 | Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
| ISO 14687-2:2012 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| IEC 62023:2011 | Structuring of technical information and documentation |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
| ISO 31000:2009 | Risk management Principles and guidelines |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| EN 13648-2:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
| IEC 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ASTM D 7650 : 2013 : REDLINE | Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| SAE J2600_201510 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices |
| SAE J2601_201612 | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| ISO 10628-1:2014 | Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| EN 13371:2001 | Cryogenic vessels - Couplings for cryogenic service |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| IEC 61069-7:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| ISO 24490:2016 | Cryogenic vessels Pumps for cryogenic service |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 13648-1:2008 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
| EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| ISO 10286:2007 | Gas cylinders Terminology |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| SAE J2799_201404 | Hydrogen Surface Vehicle to Station Communications Hardware and Software |
| ISO 26142:2010 | Hydrogen detection apparatus Stationary applications |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ISO 17268:2012 | Gaseous hydrogen land vehicle refuelling connection devices |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ASTM D 7606 : 2011 | Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases |
| IEC 62305-2:2010 | Protection against lightning - Part 2: Risk management |
| CGA G 5.5 : 2014 | HYDROGEN VENT SYSTEMS |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ISO 3864:1984 | Safety colours and safety signs |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
| ISO 21012:2006 | Cryogenic vessels Hoses |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.