API 614 : 2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
Available format(s)
Hardcopy , PDF
Superseded date
22-02-2022
Superseded by
Language(s)
English
Published date
01-04-2008
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
API Foreword
Foreword
Introduction
Part 1: General requirements
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping
6 Instrumentation, control and electrical systems
7 Inspection testing, and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Symbols
Annex C (informative) - Vendor drawing and data requirements (VDDR)
Annex D (informative) - Oil or gas filter performance and
oil-system cleanliness testing
Annex E (informative) - International materials specifications
Annex F (informative) - Explanation of reservoir levels
Bibliography
Part 2: Special-purpose oil systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General requirements
5 Piping
6 Instrumentation, control and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Bibliography
Part 3: General-purpose oil systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping
6 Instrumentation and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Annex D (informative) - Guidance to system reliability
Bibliography
Part 4: Self-acting gas seal support systems
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
4 General
5 Piping and tubing
6 Instrumentation, control and electrical systems
7 Inspection, testing and preparation for shipment
8 Vendor's Data
Annex A (informative) - Datasheets
Annex B (informative) - Piping and instrument diagrams
Annex C (informative) - Inspector's checklist
Annex D (informative) - Dry-gas-seal connection terminology and
configurations
Bibliography
Describes general requirements for lubrication systems, oil-type shaft-sealing systems, drygas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications.
| DevelopmentNote |
Also numbered as ISO 10438-1, ISO 10438-2, ISO 10438-3 & ISO 10438-4. (04/2008)
|
| DocumentType |
Standard
|
| Pages |
238
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN ISO 10438-2:2003 | Identical |
| BS 4807:1991 | Corresponds |
| BS EN ISO 10438-4:2003 | Identical |
| BS EN ISO 10438-3:2003 | Identical |
| BS EN ISO 10438-1:2003 | Identical |
| API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| BS ISO 3977-3:2004 | Gas turbines. Procurement Design requirements |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| I.S. EN ISO 10439-2:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS (ISO 10439-2:2015) |
| API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
| ASTM D 6439 : 2011 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| BS EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
| BS EN ISO 10438-3:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries General-purpose oil systems |
| DEFSTAN 02-303/2(2010) : 2010 | LUBRICATION OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES |
| API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| BS EN ISO 10439-4:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Expander-compressors |
| API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| 10/30231436 DC : 0 | BS EN ISO 10439-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS |
| API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 550PT1SEC13 : 4ED 85 | ALARMS AND PROTECTIVE DEVICES |
| ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
| I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| I.S. EN ISO 10438-3:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS |
| I.S. EN ISO 10438-4:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 4: SELF-ACTING GAS SEAL SUPPORT SYSTEMS |
| I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 10438-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| 04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
| API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ASTM D 6439 : 2011 : R2017 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| ISO 10436:1993 | Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO 10439-4:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 4: Expander-compressors |
| API STD 612:2020 | Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
| UNI EN ISO 10438-3 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS |
| UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| 10/30231432 DC : 0 | BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Non-integrally geared centrifugal and axial compressors |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| 10/30231444 DC : 0 | BS EN ISO 10439-4 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 4: EXPANDER-COMPRESSORS |
| 10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
| API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| I.S. EN ISO 10439-4:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 4: EXPANDER-COMPRESSORS (ISO 10439-4:2015) |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
| ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
| EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
| EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
| EN ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007) |
| EN ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015) |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| UNI EN ISO 10438-4 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT- SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 4: SELF-ACTING GAS SEAL SUPPORT SYSTEMS |
| EN ISO 10439-4:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors(ISO 10439-4:2015) |
| EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| 09/30171555 DC : DRAFT SEP 2009 | BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| BS EN ISO 10438-4:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries Self-acting gas seal support systems |
| ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors |
| ISO 21049:2004 | Pumps — Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| EN ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007) |
| PIP PNC00005 : 2016 | DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
| PIP REEP006 : 2013 | PUMP SELECTION GUIDELINES |
| PIP REEP007 : 2015 | GUIDELINES FOR MINIMUM AND MAXIMUM FLOW RATES FOR CENTRIFUGAL PUMPS |
| PIP REEP005 : 2017 | GUIDELINES FOR SELECTION OF GENERAL ROTATING EQUIPMENT BEARING LUBRICATION METHODS |
| PIP REEC001 : 2013 | COMPRESSOR SELECTION GUIDELINES |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| ASME B73.3 : 2015 | SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
| IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
| ISO 16812:2007 | Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| NAS1638:2011 | CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
| ASME B31.3:2016 | PROCESS PIPING |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 4572:1981 | Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance |
| ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
| ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 551 : 2016 | PROCESS MEASUREMENT |
| API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems |
| API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| ASME B73.1 : 2012 | SPECIFICATION FOR HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ISA 18.1 : 1979 | ANNUNCIATOR SEQUENCES AND SPECIFICATIONS |
| CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
| ASME B73.2 : 2016 | Specification for Vertical In-Line Centrifugal Pumps for Chemical Process |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ISO 10438-2:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.