BS EN 10088-2:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Available format(s)
Hardcopy , PDF
Superseded date
25-09-2024
Superseded by
Language(s)
English
Published date
31-10-2014
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation and ordering
5 Classification of grades
6 Requirements
7 Inspection and testing
8 Marking
Annex A (informative) - Guidelines for further treatment
(including heat treatment) in fabrication
Annex B (informative) - Applicable dimensional standards
Bibliography
Describes the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.
| Committee |
ISE/105
|
| DevelopmentNote |
Supersedes 93/305486 DC and 01/715451 DC. (07/2005) Together with BS EN 10083-1, BS EN 10084, BS EN 10088-1, BS EN 10087 and BS EN 10088-3, supersedes BS 970-1(1996). (02/2006) Also available as part of BIP 3045. (04/2006) Together with BS EN 10051, BS EN 10029, BS EN 10048, and BS EN 10095, supersedes BS 1449-2(1983). (02/2008) Supersedes 11/30254171 DC. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes. NOTE General purposes include the use of stainless steels in contact with foodstuffs. The general technical delivery conditions specified in EN10021 apply in addition to the specifications of this European Standard, unless otherwise specified in this European Standard. This European Standard does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.
| Standards | Relationship |
| I.S. EN 10088-2:2014 | Identical |
| NF EN 10088-2 : 2014 | Identical |
| NBN EN 10088-2 : 2014 | Identical |
| UNE-EN 10088-2:2015 | Identical |
| NEN EN 10088-2 : 2014 | Identical |
| NS EN 10088-2 : 2014 | Identical |
| SN EN 10088-2 : 2014 | Identical |
| UNI EN 10088-2:2014 | Identical |
| EN 10088-2:2014 | Identical |
| DIN EN 10088-2:2014-12 | Identical |
| BS 8567:2012 | Specification for outdoor electricity meter cupboards |
| 15/30270868 DC : DRAFT FEB 2015 | BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION |
| BS 8561:2013 | Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods |
| 17/30354435 DC : 0 | BS 8415 - MONUMENTS WITHIN BURIAL GROUNDS AND MEMORIAL SITES - SPECIFICATION |
| 09/30196835 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| 08/30143158 DC : DRAFT AUG 2008 | BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
| BS 6635:2015 | Manufacture of saddle trees made from wood. Specification |
| BS 8529:2010 | Composite doorsets. Domestic external doorsets. Specification |
| BS 4825-1(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 1: SPECIFICATION FOR TUBES |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| BS 6635:2003 | Manufacture of saddle trees made from wood. Specification |
| BS 460(2002) : 2002 | CAST IRON RAINWATER GOODS - SPECIFICATION |
| BS 8297:2000 | Code of practice for Design and installation of non-loadbearing precast concrete cladding |
| DEFSTAN 02-317(PT4)/2(2012) : 2012 | REQUIREMENTS FOR NON-TRANSPORTABLE HIGH PRESSURE GAS CYLINDERS - PART 4: INSTALLATION IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
| DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| 07/30140555 DC : 0 | BS 8298-2 - CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF NATURAL STONE CLADDING AND LINING - PART 2: TRADITIONAL HANDSET EXTERNAL CLADDING |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| 11/30240637 DC : 0 | BS 8567 - SPECIFICATION FOR OUTDOOR ELECTRICITY METER CUPBOARDS |
| BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
| 12/30270677 DC : 0 | BS 8561 - RENOVATION AND CONNECTION FITTINGS FOR USE ON WATER SUPPLY PIPES |
| BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
| BS 8298-2:2010 | Code of practice for the design and installation of natural stone cladding and lining Traditional handset external cladding |
| DEFSTAN 02-123(PT2)/2(2002) : 2002 | REQUIREMENT FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS |
| BS 8298-1:2010 | Code of practice for the design and installation of natural stone cladding and lining General |
| 16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| BS 8415(2005) : 2005 | MONUMENTS WITHIN BURIAL GROUNDS AND MEMORIAL SITES - SPECIFICATION |
| DEFSTAN 02-123(PT2)/3(2015) : 2015 | REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS |
| BS 7412:2002 | Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| BS 4089:1999 | Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases |
| BS 6180:1999 | Barriers in and about buildings. Code of practice |
| BS 5268-3:2006 | Structural use of timber Code of practice for trussed rafter roofs |
| BS 6510:2005 | Steel-framed windows and glazed doors |
| BS 669-2:1997 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases |
| BS 5268-3:1998 | Structural use of timber Code of practice for trussed rafter roofs |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 644:2012 | Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification |
| BS 7412:2007 | Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles |
| BS 644:2009 | Timber windows. Fully finished factory-assembled windows of various types. Specification |
| BS 5427(2016) : 2016 | CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 1245:2012 | Pedestrian doorsets and door frames made from steel sheet. Specification |
| 08/30167722 DC : DRAFT SEP 2008 | BS 7875 - SYNTHETIC SADDLE TREES - SPECIFICATION |
| 12/30263952 DC : 0 | BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| BS SP22-27(1950) : 1950 | SPECIFICATION FOR BA WASHERS - FOR AIRCRAFT PURPOSES (PRIMARILY FOR FOR INSTRUMENT USE |
| 12/30266655 DC : DRAFT JULY 2012 | BS SP 139-140 A2 - SPECIFICATION FOR CORROSION-RESISTING STEEL CRINKLE WASHERS |
| 12/30218393 DC : 0 | BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| BS 7886:1997 | Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique |
| BS 7875:2009 | Synthetic saddle trees. Specification |
| BS 3441:1995 | Specification for tanks for the transport of milk and liquid milk products |
| 11/30142900 DC : 0 | BS 1245 - PEDESTRIAN DOORSETS AND DOOR FRAMES MADE FROM STEEL SHEET - SPECIFICATION |
| BS SP139 & SP140(1969) : 1969 | AEROSPACE SERIES - SPECIFICATION FOR CORROSION-RESISTING STEEL CRINKLE WASHERS |
| 15/30095322 DC : 0 | BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| 10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
| 09/30209261 DC : 0 | BS 5911-1:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 1: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE PIPES (INCLUDING JACKING PIPES) AND FITTINGS WITH FLEXIBLE JOINTS (COMPLEMENTARY TO BS EN 1916:2002) |
| 04/30100932 DC : DRAFT AUG 2004 | BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS |
| 17/30342957 DC : 0 | BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| 07/19983222 DC : 0 | BS 8298-1 - CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF NATURAL STONE CLADDING AND LINING - PART 1: GENERAL |
| 06/30143171 DC : DRAFT SEP 2006 | BS 7412 - PLASTICS WINDOWS AND DOORSETS MADE FROM UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) EXTRUDED HOLLOW PROFILES |
| BS PAS 2424(2014) : 2014 | QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF RESIDUAL ANTIMICROBIAL (BACTERICIDAL AND/OR YEASTICIDAL) EFFICACY OF LIQUID CHEMICAL DISINFECTANTS ON HARD NON-POROUS SURFACES - TEST METHOD |
| BS 8221-2:2000 | Code of practice for cleaning and surface repair of buildings Surface repair of natural stones, brick and terracotta |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| 09/30160438 DC : DRAFT JAN 2009 | BS 8499 - SPECIFICATION FOR DOMESTIC GAS METER BOXES AND METER BRACKET |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| ISO 9445:2002 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
| ISO 9444-2:2009 | Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN ISO 9444-2:2010 | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
| EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 18286:2010 | Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008) |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| ISO 9445-2:2009 | Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 18286:2008 | Hot-rolled stainless steel plates — Tolerances on dimensions and shape |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| ISO 9445-1:2009 | Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.