BS EN 61760-1:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Surface mounting technology Standard method for the specification of surface mounting components (SMDs)
Hardcopy , PDF
02-10-2020
English
29-09-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
INTRODUCTION
1 Scope and object
1.1 Scope
1.2 Object
2 Normative references
3 Terms and definitions
4 Requirements for component design and component
specifications
4.1 General requirement
4.2 Packaging
4.3 Labelling of product packaging
4.4 Component marking
4.5 Storage and transportation
4.6 Component outline and design
4.7 Mechanical stress
4.8 Component reliability assurance
4.9 Additional requirements for compatibility with
lead-free soldering
5 Specification of assembly process conditions
5.1 General
5.2 Securing the component on the substrate prior
to soldering
5.3 Mounting methods
5.4 Cleaning (where applicable)
5.5 Removal and/or replacement of SMDs
6 Typical process conditions
6.1 Soldering processes, temperature/time profiles
6.2 Typical cleaning conditions for assemblies
7 Requirements for components and component specifications
related to suitability with various mounting processes
7.1 General
7.2 Wettability
7.3 Resistance to dissolution of metallization
7.4 Resistance to soldering heat
7.5 Resistance to cleaning solvent
7.6 Soldering profiles
7.7 Bonding strength test for the component glue interface
test
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Provides a reference set of process conditions and related test conditions to be used when compiling component specifications of electronic components that are intended for usage in surface mount technology.
| Committee |
EPL/501
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
IEC 61760-1:2006-04(en-fr) gives a reference set of process conditions and related test conditions to be used when compiling component specifications of electronic components that are intended for usage in surface mount technology. The main changes with regard to the previous edition concern:
- requirements related to lead-free soldering;
- extension of the scope to include also components mounted by gluing;
- direct reference to IEC 60068-2-58 for requirements on solderability and resistance to soldering heat;
- classification into categories based on the component\'s ability to withstand resistance to soldering heat has been deleted.
| Standards | Relationship |
| EN 61760-1:2006 | Identical |
| DIN EN 61760-1:2006-10 | Identical |
| NBN EN 61760-1 : 2007 | Identical |
| IEC 61760-1:2006 | Identical |
| I.S. EN 61760-1:2006 | Identical |
| SN EN 61760-1 : 1998 | Identical |
| NF EN 61760-1 : 2014 | Identical |
| BS 6221-25:2000 | Printed wiring boards Guide to the rework and repair of soldered surface mounted printed board assemblies |
| EN 60286-5:2004/A1:2009 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 5: MATRIX TRAYS |
| EN 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| IEC 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 61340-5-3:2015 | Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices |
| EN 61340-5-1:2016/AC:2017-05 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 62090:2017 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| EN 62090:2017 | Product package labels for electronic components using bar code and two- dimensional symbologies |
| IEC 60286-5:2003+AMD1:2009 CSV | Packaging of components for automatic handling - Part 5: Matrixtrays |
| IEC 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| EN 60286-3:2013/AC:2013 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013) |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| IEC 60068-2-77:1999 | Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 60062:2016 | Marking codes for resistors and capacitors |
| EN 60062:2016/AC:2016-12 | MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
| EN 60068-2-77:1999 | Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock |
| EN 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| IEC 60286-3:2013 | Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
| EN 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| EN 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| IEC 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| EN 60068-2-45:1992/A1:1993 | Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
| IEC 60068-2-69:2017 | Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method |
| EN 60194:2006 | Printed board design, manufacture and assembly - Terms and definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.