EN 13674-1:2011+A1:2017
Current
Current
The latest, up-to-date edition.
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
Published date
10-05-2017
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Steel grades
6 Profile drawings/properties/mass
7 Manufacture
8 Qualifying tests
9 Acceptance tests
Annex A (normative) - Rail profiles
Annex B (normative) - Standard test method for the
determination of the plane strain fracture
toughness (K[Ic]) of rails
Annex C (normative) - Method for the determination of rail
foot surface longitudinal residual stresses
Annex D (normative) - Limiting sulfur prints
Annex E (normative) - Profile and drilling gauges
Annex F (normative) - Microscopic examination of rail
steels using standard diagrams to assess the content
of non-metallic inclusions
Annex G (informative) - Significant technical changes
between this European standard and the previous
edition
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2008/57/EC
Bibliography
This European Standard specifies Vignole railway rails of 46 kg/m and greater linear mass, for conventional and high speed railway track usage.Nine pearlitic steel grades are specified covering a hardness range of 200 HBW to 440 HBW and include non heat treated non alloy steels, non heat treated alloy steels, and heat treated non alloy steels and heat treated alloy steels .There are 23 rail profiles specified in this standard.Two classes of rail straightness are specified, differing in requirements for straightness, surface flatness and crown profile. Two classes of profile tolerances are specified.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
Supersedes PREN 13674-1. (08/2011) 2011 Edition Re-Issued in May 2017 & incorporates AMD 1 2017. (05/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 13674-1 : 2011 + A1 2017 | Identical |
| NBN EN 13674-1 : 2011 | Identical |
| NEN EN 13674-1 : 2011 + A1 2017 | Identical |
| NS EN 13674-1 : 2011 + A1 2017 | Identical |
| I.S. EN 13674-1:2011 | Identical |
| PN EN 13674-1 : 2011 + A1 2017 | Identical |
| SN EN 13674-1+A1:2017 | Identical |
| UNI EN 13674-1 : 2011 | Identical |
| BS EN 13674-1 : 2011 | Identical |
| DIN EN 13674-1:2011-04 | Identical |
| UNE-EN 13674-1:2012+A1:2018 | Identical |
| UNE-EN 13674-1:2012 | Identical |
| DIN EN 13674-1:2017-07 | Identical |
| BS EN 13674-1:2011+A1:2017 | Identical |
| 16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNI EN 14587-3 : 2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| BS EN 13001-3-3:2014 | Cranes. General design Limit states and proof of competence of wheel/rail contacts |
| 14/30269477 DC : 0 | BS EN 16729-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - NDT ON RAILS IN TRACK - PART 1: REQUIREMENTS FOR ULTRASONIC INSPECTION AND EVALUATION PRINCIPLES |
| EN 14730-2:2006 | Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds |
| 10/30205098 DC : DRAFT JUNE 2010 | BS EN 13481-2 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| BS EN 50216-4:2015 | Power transformer and reactor fittings Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) |
| 14/30258527 DC : 0 | BS EN 16725 - RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| 17/30326176 DC : 0 | BS EN 16729-3 - RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
| DIN EN 15686 E : 2010 | RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| BS EN 14587-2:2009 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| 12/30265276 DC : 0 | BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| 09/30206834 DC : DRAFT SEP 2009 | BS EN 15686 - RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| BS EN 15594:2009 | Railway applications. Track. Restoration of rails by electric arc welding |
| UNE-EN 14587-3:2013 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| 07/30159033 DC : 0 | BS EN 15687 - RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF FREIGHT VEHICLES WITH STATIC WHEEL LOADS HIGHER THAN 112,5 KN UP TO 125 KN |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| DIN EN 13674-2:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| I.S. EN 16725:2016 | RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| I.S. EN 16207:2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| UNE-EN 14363:2017 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| 16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| DIN EN 13481-7:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| DIN EN 13481-1:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
| DIN EN 13481-2:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| BS EN 14730-2:2006 | Railway applications. Track. Aluminothermic welding of rails Qualifications of aluminothermic welders, approval of contractors and acceptance of welds |
| UNE-EN 13977:2012 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| BS EN 13481-3:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for wood sleepers |
| BS EN 14730-1:2017 | Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
| I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| EN 13232-7:2006+A1:2011 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
| EN 13481-5:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
| DIN EN 13001-3-3:2015-02 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| EN 50216-4:2015 | Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) |
| NBR 16614 : 2017 | TURNOUT TYPE U WITH DEVIATION RADIUS UP TO 760 M IN STANDARD GEOMETRY - REQUIREMENTS |
| I.S. EN 14363:2016 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| DIN EN 16207:2014-11 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| 10/30205101 DC : DRAFT JUNE 2010 | BS EN 13481-3 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
| UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| BS EN 16273:2014 | Railway applications. Track. Forged rail transitions |
| 10/30205107 DC : DRAFT JUNE 2010 | BS EN 13481-5 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| NF EN 15594 : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| DIN EN 16273:2015-03 | Railway applications - Track - Forged rail transitions |
| 10/30205104 DC : DRAFT JUNE 2010 | BS EN 13481-4 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
| PREN 14587-1 : DRAFT 2017 | RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| 10/30205110 DC : DRAFT JUNE 2010 | BS EN 13481-7 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSINGS AND CHECK RAILS |
| UNE-EN 13001-3-3:2015 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| BS EN 14587-3:2012 | Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
| BS EN 14363:2005 | Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests |
| DIN EN 15594:2009-08 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 11/30240285 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| BS EN 15686:2010 | Railway applications. Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G |
| I.S. EN 16273:2014 | RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| I.S. EN 15686:2010 | RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| UNE-EN 16273:2015 | Railway applications - Track - Forged rail transitions |
| EN 13674-4:2006+A1:2009 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| NF EN 13674-2 : 2006 + A1 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 14730-1:2014-05 (Draft) | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| UNE-EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
| UNE-EN 13481-1:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
| I.S. EN 13481-5:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| I.S. EN 13674-3:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| I.S. EN 13481-3:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
| I.S. EN 13232-7:2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
| I.S. EN 13481-4:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
| DIN EN 13232-7:2012-01 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts (includes Amendment A1:2011) |
| DIN EN 13481-8:2006-06 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
| I.S. EN 13481-8:2006 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
| I.S. EN 13481-7:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSING AND CHECK RAILS |
| I.S. EN 13232-9:2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
| I.S. EN 14730-1:2017 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| I.S. EN 13481-1:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
| I.S. EN 13481-2:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| VDI 3576:2011-03 | Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks |
| 06/30156796 DC : 0 | BS EN 15594 - RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 16/30258487 DC : 0 | BS EN 13231-5 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 5: PROCEDURES FOR RAIL REPROFILING IN PLAIN LINE, SWITCHES, CROSSINGS AND EXPANSION DEVICES |
| 10/30205095 DC : DRAFT JUNE 2010 | BS EN 13481-1 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
| DIN EN 14587-3:2013-01 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| BS EN 16432-2:2017 | Railway applications. Ballastless track systems System design, subsystems and components |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| DIN EN 14587-2:2009-08 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| I.S. EN 16729-1:2016 | RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 1: REQUIREMENTS FOR ULTRASONIC INSPECTION AND EVALUATION PRINCIPLES |
| UNE-EN 16729-1:2016 | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles |
| UNE-EN 14587-2:2010 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| BS EN 13674-2 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 07/30159030 DC : 0 | BS EN 15686 - RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| BS EN 16729-1:2016 | Railway applications. Infrastructure. Non-destructive testing on rails in track Requirements for ultrasonic inspection and evaluation principles |
| I.S. EN 50216-4:2015 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 4: BASIC ACCESSORIES (EARTHING TERMINAL, DRAIN AND FILLING DEVICES, THERMOMETER POCKET, WHEEL ASSEMBLY) |
| PREN 14363 : DRAFT 2013 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| PREN 13231-5 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 5: PROCEDURES FOR RAIL REPROFILING IN PLAIN LINE, SWITCHES, CROSSINGS AND EXPANSION DEVICES |
| EN 14587-1:2007 | Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| DIN EN 13232-9:2012-01 | Railway applications - Track - Switches and crossings - Part 9: Layouts (includes Amendment A1:2011) |
| UNE-EN 14730-1:2018 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| UNE-EN 16207:2015 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| UNE-EN 13232-9:2007 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
| UNI EN 13481-4 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
| UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 13481-3 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
| UNI EN 13674-3 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| UNI EN 13481-7 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSINGS AND CHECK RAILS |
| UNI EN 13232-7 : 2012 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
| UNI EN 13232-9 : 2012 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
| UNI EN 13481-1 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
| UNI EN 15594 : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| UNI EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| 08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 15686 : 2010 | RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| BS EN 16725:2016 | Railway applications. Track. Restoration and repair of manganese crossings |
| 14/30297210 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| I.S. EN 14730-2:2006 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 2: QUALIFICATION OF ALUMINOTHERMIC WELDERS, APPROVAL OF CONTRACTORS AND ACCEPTANCE OF WELDS |
| BS EN 16207:2014 | Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| UNI EN 13674-2 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| NF EN 13674-4 : 2006 + A1 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| 17/30358164 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 14587-1:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN FIXED PLANT |
| EN 16729-1:2016 | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles |
| ISO 5003:2016 | Flat bottom (Vignole) railway rails 43 kg/m and above |
| I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 13674-2:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| I.S. EN 14587-1:2007 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN A FIXED PLANT |
| DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| DIN EN 13481-5:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| UNE-EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| BS EN 13481-5 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
| BS EN 13481-7:2012 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for switches and crossings and check rails |
| BS EN 13481-1:2012 | Railway applications. Track. Performance requirements for fastening systems Definitions |
| BS EN 13481-8:2006 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for track with heavy axle loads |
| UNE-EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| BS EN 13674-3 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
| DIN EN 13232-9:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
| DIN EN 13232-7:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
| BS EN 13232-7 : 2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
| UNE-EN 13481-2:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
| BS EN 13481-2 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
| EN 15594:2009 | Railway applications - Track - Restoration of rails by electric arc welding |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 14587-2:2009 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| EN 15686:2010 | Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G |
| EN 16432-2:2017 | Railway applications - Ballastless track systems - Part 2: System design, subsystems and components |
| EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| EN 13674-3:2006+A1:2010 | Railway applications - Track - Rail - Part 3: Check rails |
| EN 16725:2016 | Railway applications - Track - Restoration and repair of manganese crossings |
| EN 13674-2:2006+A1:2010 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| EN 16729-3:2018 | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects |
| EN 14587-3:2012 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| EN 14730-1:2017 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| EN 16273:2014 | Railway applications - Track - Forged rail transitions |
| UNE-EN 16725:2017 | Railway applications - Track - Restoration and repair of manganese crossings |
| 06/30156800 DC : 0 | BS EN 14587-2 - RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 21: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| 03/317632 DC : DRAFT OCT 2003 | BS EN 14730-1 - RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| 13/30250658 DC : 0 | BS EN 14363 - RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| BS EN 14587-1:2007 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| I.S. EN 13001-3-3:2014 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| UNE-EN 15594:2010 | Railway applications - Track - Restoration of rails by electric arc welding |
| UNI EN 14587-2 : 2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| I.S. EN 15594:2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| UNE-EN 50216-4:2015 | Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) |
| 16/30258490 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| I.S. EN 16729-3:2018 | RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
| I.S. EN 14587-3:2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| 15/30294486 DC : 0 | BS EN 16843 - RAILWAY APPLICATIONS - INFRASTRUCTURE - MECHANICAL REQUIREMENTS FOR JOINTS IN RUNNING RAILS |
| I.S. EN 14587-2:2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| DIN EN 13674-3:2010-12 | Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
| DIN EN 13481-3:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| DIN EN 13481-4:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| BS EN 13481-4:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for steel sleepers |
| BS EN 13232-9 : 2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| EN 13232-9:2006+A1:2011 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
| EN 13481-2:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
| EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| EN 13481-1:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
| DIN EN 15686:2010-11 | RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES WITH CANT DEFICIENCY COMPENSATION SYSTEM AND/OR VEHICLES INTENDED TO OPERATE WITH HIGHER CANT DEFICIENCY THAN STATED IN EN 14363:2005, ANNEX G |
| DIN EN 13674-2:2011-01 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| DIN EN 14730-1:2010-12 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
| EN 13481-8:2006 | Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads |
| UNE-EN 13232-7:2007 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
| UNE-EN 13674-2:2007 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| ONORM EN 14587-2 : 2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| UNE-EN 13481-5:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
| UNE-EN 13674-3:2007 | Railway applications - Track - Rail - Part 3: Check rails |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10276-1:2000 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 12108:2012 | Metallic materials Fatigue testing Fatigue crack growth method |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 4968:1979 | Steel Macrographic examination by sulfur print (Baumann method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.