EN 292-1 : 1991
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
Superseded date
01-11-2003
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
0. Introduction
1. Scope
2. Normative references
3. Basic concepts
3.1 Machinery (machine)
3.2 Reliability of a machine
3.3 Maintainability of a machine
3.4 Safety of a machine
3.5 Hazard
3.6 Hazardous situation
3.7 Risk
3.8 Risk assessment
3.9 Hazardous machine function
3.10 Danger zone
3.11 Design of a machine
3.12 Intended use of machine
3.13 Safety functions
3.14 Automatic monitoring
3.15 Unexpected (or unintended) start-up
3.16 Failure to danger
3.17 Fail-safe condition (minimized failure to danger)
3.18 Risk reduction by design
3.19 Safeguarding
3.20 Information for use
3.21 Operator
3.22 Guard
3.23 Safety device
3.24 Deterring/impeding device
4. Description of hazards generated by machinery
4.1 General
4.2 Mechanical hazard
4.3 Electrical hazard
4.4 Thermal hazard
4.5 Hazards generated by noise
4.6 Hazards generated by vibration
4.7 Hazards generated by radiation
4.8 Hazards generated by materials and substances
4.9 Hazards generated by neglecting ergonomic
principles in machine design
4.10 Hazard combinations
5. Strategy for selecting safety measures
5.1 Specification of the limits of the machine
5.2 Systematic assessment of hazardous situations
5.3 Removal of the hazards or limitation of the risk
5.4 Safeguarding against hazards which could not be
avoided or sufficiently limited according to 5.3
5.5 Informing and warning users about residual hazards
5.6 Additional precautions
5.7 Remarks
6. Risk assessment
6.1 Introduction
6.2 Factors to be taken into account when assessing
a risk
Annex A (informative) General schematic representation
of a machine
Annex B (informative) Trilingual alphabetical index
Lays down basic terminology and specifies general design methods, to help designers and manufacturers in achieving safety in the design of machinery for professional and non-professional purposes. May also be used for other technical products having similar hazards. It is recommended that this standard is incorporated in training courses and manuals to convey basic terminology and general design methods to designers.
| Committee |
CEN/TC 114
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| SN EN 292-1 : 1994 | Identical |
| UNE-EN 292-1:1993 | Identical |
| NF EN 292-1 : 1991 | Identical |
| I.S. EN 292-1:1993 | Identical |
| UNI EN 292-1 : 1992 | Identical |
| NBN EN 21992-1 : 1992 | Identical |
| BS EN 292-1:1991 | Identical |
| NS EN 292-1 : 1ED 1991 | Identical |
| NEN EN 292-1 : 1994 | Identical |
| DIN EN 292-1:1991-11 | Identical |
| I.S. EN 1037:1996 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| 03/302919 DC : DRAFT SEP 2003 | EN 12312 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| 95/106930 DC : DRAFT SEP 1995 | BS EN 12110 TUNNELLING MACHINES - AIRLOCKS - SAFETY REQUIREMENTS |
| I.S. EN 1454:1998 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| PREN 12312-16 : DRAFT 99 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| I.S. EN 12639:2000 | LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY |
| 96/542029 DC : DRAFT AUG 96 | EN 1846-2 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| 01/122563 DC : DRAFT JULY 2001 | BS EN 14175-2 - FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| 00/702570 DC : DRAFT JAN 2000 | ISO/CD 3691-5 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: MANUALLY PROPELLED TRUCKS |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| 02/711111 DC : DRAFT SEP 2002 | PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| 04/102158 DC : 0 | BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES |
| 02/561267 DC : DRAFT MAR 2002 | PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY |
| 00/707535 DC : DRAFT APR 2000 | PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 02/710681 DC : DRAFT SEP 2002 | BS EN 14502-1 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| 03/118276 DC : DRAFT NOV 2003 | BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| PD CR 954-100:1999 | Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996 |
| 03/313810 DC : 0 | EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 97/720419 DC : DRAFT DEC 1997 | PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY |
| 95/106931 DC : DRAFT SEP 1995 | BS EN 12111 TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
| 03/314353 DC : 0 | EN 378-4 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY |
| 99/708376 DC : DRAFT MAR 1999 | PREN 13586 - CRANES - ACCESS |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 894-1:2009-01 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS |
| 02/561276 DC : DRAFT MAR 2002 | BS 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| 97/707829 DC : DRAFT MAY 1997 | PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| 97/711338 DC : DRAFT JUL 1997 | PREN 12644-3 - CRANES - SAFETY - REQUIREMENTS FOR INSPECTION AND USE - PART 3: FITNESS FOR PURPOSE |
| 99/711929 DC : DRAFT JUL 1999 | EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| 08/30183463 DC : DRAFT AUG 2008 | BS EN 15848 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| CSA Z10535 : 2003 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| ISO 16156:2004 | Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
| GOST R EN 818-5 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS OF GRADE 4 |
| EN 81-80:2003 | Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts |
| DIN EN 1552:2003-09 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
| DIN EN 746-8:2001-04 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT |
| DIN EN 12198-1:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| DIN EN 13118:2010-01 | Agricultural machinery - Potato harvesting equipment - Safety (includes Amendment A1:2009) |
| DIN EN 1010-3:2010-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009) |
| DIN EN 1028-2:2008-06 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements (includes Amendment A1:2008) |
| DIN EN 12195-2:2001-02 | LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES |
| DIN EN 12198-2:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE |
| DIN EN 792-1:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| DIN EN 792-7:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| DIN EN 792-5:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| BS EN 13586 : 2004 | CRANES - ACCESS |
| BS EN 786 : 1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| BS EN 1726-1:1999 | Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N General requirements |
| BS EN 626-2 : 1996 | SAFETY OF MACHINERY - REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES |
| BS EN 1093-8 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| BS EN 894-3 : 2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| BS EN 792-10 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 13448 : 2002 | AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY |
| BS EN 774:1996 | Garden equipment. Hand held, integrally powered hedge trimmers. Safety |
| BS EN 792-2 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| BS EN 1151:1999 | Pumps. Rotodynamic pumps. Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations. Requirements, testing, marking |
| BS EN 704 : 1999 | AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY |
| BS EN 1834-3:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres |
| BS EN 12195-2:2001 | Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres |
| BS EN 12644-1 : 2001 | CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS |
| BS EN 954-1:1997 | Safety of machinery. Safety related parts of control systems General principles for design |
| BS EN 792-4 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| BS EN 12198-2 : 2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE |
| BS EN 12077-2 : 1999 | CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES |
| BS EN 1028-2 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| BS EN 614-2 : 2000 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS |
| BS EN 1035:1999 | Tannery machines. Moving platen machinery. Safety requirements |
| BS EN 12198-3 : 2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| BS EN 13118 : 2000 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 1454:1997 | Portable, hand-held, internal combustion cutting-off machines. Safety |
| I.S. EN 12198-2:2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE |
| I.S. EN 12644-2:2000 | CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 12385-10:2003+A1:2008 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 12469:2000 | Biotechnology - Performance criteria for microbiological safety cabinets |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| CR 1100 : 1993 | MEMORANDUM ON HEALTH AND SAFETY STANDARDIZATION IN SUPPORT OF 'NEW APPROACH' DIRECTIVES - APPLICATION IN THE FIELD OF MACHINERY |
| EN 12884:1999 | Biotechnology - Performance criteria for centrifuges |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| EN 1093-8:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
| CR 954-100:1999 | Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
| DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| EN 1028-2:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 1093-9:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
| DIN EN 791:2010-01 | DRILL RIGS - SAFETY |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1093-4:1996+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
| EN 12965:2003+A2:2009 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
| EN 1010-4:2004+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| UNI EN 415-3 : 2010 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| EN 13118:2000+A1:2009 | Agricultural machinery - Potato harvesting equipment - Safety |
| EN 50144-2-2:1999 | Safety of hand-held electric motor operated tools - Part 2-2: Particular requirements for screwdrivers and impact wrenches |
| EN 12198-2:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| EN 13448:2001+A1:2009 | Agricultural and forestry machinery - Inter-row mowing units - Safety |
| EN 1010-3:2002+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
| DIN EN 999:1998-12 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| DIN EN 13889:2009-02 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
| I.S. EN 1088:1996 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| 00/107021 DC : DRAFT OCT 2000 | BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| 01/105373 DC : DRAFT JUL 2001 | BS EN 474-1 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| I.S. EN 1870-2:1999 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| 01/105382 DC : DRAFT JULY 2001 | BS EN 474-10 - EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS |
| DIN EN 81-28:2003-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 28: REMOTE ALARMS ON PASSENGER AND GOODS PASSENGER LIFTS |
| 03/306578 DC : DRAFT APR 2003 | EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
| I.S. EN ISO 11806:2008 | AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY |
| I.S. EN 792-9:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| 94/713480 DC : DRAFT NOV 1994 | PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS |
| 04/30115780 DC : DRAFT JUN 2004 | ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| 02/101173 DC : DRAFT FEB 2002 | BS EN 500-2 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD MILLING MACHINES |
| CEI EN 50308 : 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| 99/711217 DC : DRAFT JUL 1999 | EN 13638 - NGV FILLING STATIONS |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| 03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| 04/30114100 DC : DRAFT MAY 2004 | PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| 07/30166915 DC : DRAFT AUG 2007 | BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 96/101548 DC : DRAFT MAR 1996 | BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| 01/105374 DC : DRAFT JUL 2001 | BS EN 474-2 EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS |
| 03/100093 DC : DRAFT JAN 2003 | BS EN 14502-2 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS |
| 99/707961 DC : DRAFT MAY 1999 | PREN 12312-16 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| 04/102838 DC : DRAFT JAN 2004 | EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| 08/30177213 DC : DRAFT JUNE 2008 | BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| 99/707963 DC : DRAFT MAY 1999 | PREN 12312-18 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: OXYGEN/NITROGEN UNITS |
| BS EN 50144-2-5:2000 | Safety of hand-held electric motor operated tools Particular requirements for circular saws and circular knives |
| 01/715188 DC : DRAFT NOV 2001 | PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| 03/114108 DC : DRAFT AUG 2003 | EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 02/101175 DC : DRAFT FEB 2002 | BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES |
| BS EN 50144-2-2:2000 | Safety of hand-held electric motor operated tools Particular requirements for screwdrivers and impact wrenches |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| 00/709413 DC : 0 | BS EN ISO 15012-2 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: TESTING OF THE CAPTURE ZONE OF WELDING FUME EXTRACTION DEVICES |
| CSA Z10535 : 2003 : R2014 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| 00/715016 DC : DRAFT OCT 2000 | PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| GOST R EN 818-1 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL REQUIREMENTS FOR ACCEPTANCE |
| UNI EN 81-80 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| DD ENV 1070:1993 | Safety of machinery. Terminology |
| UNI EN 707 : 2010 | AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY |
| ASTM E 2484 : 2008 : R2015 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024) |
| ASTM E 2484 : 2008 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices |
| I.S. EN 792-13:2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| I.S. EN 12965:2003 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY |
| DIN EN 1804-1:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010) |
| DIN EN 746-5:2001-04 | Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; English version of DIN EN 746-5 |
| DIN EN 1005-3:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| DIN EN 12321:2009-07 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| DIN EN 1677-4:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| DIN EN 1005-2:2009-05 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| DIN EN 1005-1:2009-04 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| DIN EN 13059:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 1010-4:2010-12 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009) |
| DIN EN 12965:2009-12 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY |
| DIN EN 12385-10:2008-07 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications (includes Amendment A1:2008) |
| DIN EN 1526:2009-07 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
| DIN EN 1677-1:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| DIN EN 12957:2009-07 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| DIN EN 1677-5:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| DIN EN 792-8:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| DIN EN 792-12:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| DIN EN 909:2009-12 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009) |
| DIN EN 693:2011-11 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| BS EN 792-8 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| BS EN 1870-2:1999 | Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws |
| BS EN 1757-1:2001 | Safety of industrial trucks. Pedestrian propelled trucks Stacker trucks |
| DIN EN 894-3:2010-01 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008) |
| BS EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| BS EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| BS EN 792-12 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| BS EN 792-6 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| BS EN 81-80:2003 | Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of safety of existing passenger and goods passenger lifts |
| BS EN 1526 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
| BS EN 1093-6 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| BS EN 12321 : 2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| I.S. EN 1005-1:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| I.S. EN 1005-3:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| I.S. EN 1093-6:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| I.S. EN 13448:2002 | AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY |
| I.S. EN 1526:1998 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
| I.S. EN 12198-1:2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| I.S. EN 1010-4:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| I.S. EN 1070:1999 | SAFETY OF MACHINERY - TERMINOLOGY |
| I.S. EN 12198-3:2002 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| I.S. EN 12644-1:2001 | CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS |
| DIN EN 792-3:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 709:1997 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY |
| I.S. EN 13118:2001 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| I.S. EN 13140:2001 | AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY |
| I.S. EN 1028-1:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 792-2:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| DIN EN 792-6:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| I.S. EN 786:1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| DIN EN 792-4:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| I.S. EN 894-2:1997 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN 1525:1998 | SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS |
| I.S. EN 415-3:2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| DIN EN 792-1:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| I.S. EN 13889:2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| DIN EN 792-7:2002-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| EN 13586:2004+A1:2008 | Cranes - Access |
| I.S. EN 609-2:2000 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| I.S. EN 1677-2:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| DIN EN 792-4:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| DIN EN 12639:2000-06 | LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND 3 OF ACCURACY |
| I.S. EN 1677-5:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| I.S. EN 1028-2:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 818-7:2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| DIN EN 792-3:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 1804-1:2002 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 792-5:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| DIN EN 792-6:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| I.S. EN 909:1999 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| DIN EN 1050:1997-01 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 1804-1:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| I.S. EN 1010-3:2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| I.S. EN 1677-6:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| I.S. EN 706:1997 | AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY |
| I.S. EN 13586:2004 | CRANES - ACCESS |
| I.S. EN 1677-4:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| I.S. EN 1093-8:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 13059:2002 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| I.S. EN 12385-10:2004 | STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS |
| I.S. EN 614-2:2000 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS |
| I.S. EN 908:1999 | AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY |
| I.S. EN 894-1:1997 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS |
| DIN EN 14175-2:2003-08 | FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| DIN EN 13478:2008-12 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| I.S. EN 1093-7:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| DIN EN 1088:1996-02 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| DIN EN 792-9:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| DIN EN 792-8:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNI EN 1804-1 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| I.S. EN ISO 14314:2009 | RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS |
| I.S. EN 574:1997 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| I.S. EN 1677-1:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| I.S. EN 12321:2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| I.S. EN 13557:2003 | CRANES - CONTROLS AND CONTROL STATIONS |
| DIN EN 12957:2001-12 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| DIN EN 1757-4:2003-11 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| I.S. EN 1093-4:1996 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines |
| I.S. EN 894-3:2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| I.S. EN 1093-9:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| UNI EN 792-7 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| UNI EN 1677-6 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| UNI EN 626-1 : 2008 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS |
| UNI EN 792-11 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| UNI EN 764-7 : 2004 | PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT |
| VDI 4421:2000-10 | Driving systems for piece goods conveying - Survey and selection |
| 01/105379 DC : DRAFT JULY 2001 | BS EN 474-7 - EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS |
| UNI EN 13586 : 2008 | CRANES - ACCESS |
| 01/711762 DC : DRAFT SEP 2001 | BS EN 14238 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| 99/707964 DC : DRAFT MAY 1999 | PREN 12312-19 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS AND HYDRAULIC TAIL STANCHIONS |
| GOST R EN 818-3 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 4 CHAIN SLINGS |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| I.S. EN 1552:2003 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
| 03/314350 DC : 0 | EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA |
| BS EN 50308:2004 | Wind turbines. Protective measures. Requirements for design, operation and maintenance |
| I.S. EN 1726-1:1999 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10,000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20,000 N - GENERAL REQUIREMENTS |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| 00/541673 DC : DRAFT NOV 2000 | BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1050:1997 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| 01/105378 DC : DRAFT JULY 2001 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| 01/105376 DC : DRAFT JUL 2001 | BS EN 474-4 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS |
| I.S. EN 115:1995 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS |
| 02/101176 DC : DRAFT FEB 2002 | BS EN 500-6 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS |
| 03/117188 DC : DRAFT OCT 2003 | BS EN 12101-10 - SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| DIN EN 894-2:2009-02 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS |
| 00/707659 DC : DRAFT APR 2000 | PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| 96/104565 DC : JUN 96 | EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| 01/105381 DC : DRAFT JULY 2001 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| 04/30098132 DC : DRAFT JUL 2004 | EN 14969 - RAILWAY APPLICATIONS - TRACK - QUALIFICATION OF RAILWAY TRACKWORKS CONTRACTORS |
| 04/30110543 DC : 0 | EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| 01/105383 DC : DRAFT JULY 2001 | BS EN 474-11 - EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS |
| 12/30265803 DC : DRAFT JUNE 2012 | BS EN 62714-2 - ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - AUTOMATION - PART 2: ROLE LIBRARIES |
| 03/115173 DC : 0 | BS EN 13035-1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY |
| 02/710588 DC : DRAFT AUG 2002 | BS EN 14439 - CRANES - TOWER CRANES |
| 00/562569 DC : DRAFT JUN 2000 | BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION |
| 97/720418 DC : DRAFT DEC 1997 | EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY |
| 96/104566 DC : DRAFT JUN 1996 | PREN 12437-4 - SAFETY OF MACHINERY - PERFORMANCE MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 4: FIXED LADDERS |
| 03/111188 DC : DRAFT AUG 2003 | BS EN 1010-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| 97/719442 DC : DRAFT NOV 1997 | PREN 13035-7 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| 04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
| BS EN 50144-2-4:2000 | Safety of hand-held electric motor operated tools Particular requirements for sanders |
| BS EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs General requirements |
| 00/709412 DC : DRAFT MAY 2000 | BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME |
| UNI EN 1010-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| PREN 14175-2 : DRAFT 2001 | FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 50308:2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| I.S. EN 707:1999 | AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY |
| BS EN 707 : 1999 | AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY |
| UNI EN 12733 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| DIN EN 1088:2008-10 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| DIN EN 13140:2010-09 | Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety (includes Amendment A1:2009) |
| DIN EN 1677-2:2008-06 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 (includes Amendment A1:2008) |
| DIN EN 547-1:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| DIN EN 547-2:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| DIN EN 746-4:2000-05 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4 |
| DIN EN 1677-6:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 786:2012-01 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| DIN EN 1093-8:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER - TEST BENCH METHOD |
| DIN EN 1093-6:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| DIN EN 792-11:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN 13736:2009-11 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| DIN EN 349:2008-09 | SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY |
| DIN EN 745:2010-01 | AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY |
| DIN EN 12644-1:2009-06 | CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS |
| DIN EN ISO 14314:2010-01 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 1093-7:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| BS EN 12195-3:2001 | Load restraint assemblies on road vehicles. Safety Lashing chains |
| BS EN 999 : 1999 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| BS EN 746-8:2000 | Industrial thermoprocessing equipment Particular safety requirements for quenching equipment |
| BS EN ISO 14314:2009 | Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements |
| BS EN 1677-3 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| BS EN 909 : 1999 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| BS EN 13889 : 2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| BS EN 115:1995 | Safety rules for the construction and installation of escalators and passenger conveyors. |
| BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
| BS EN 574 : 1997 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| ISO 11806:1997 | Agricultural and forestry machinery Portable hand-held combustion engine driven brush cutters and grass trimmers Safety |
| BS EN 14016-1:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride Definitions, requirements |
| BS EN 418:1992 | Safety of machinery. Emergency stop equipment, functional aspects. Principles for design |
| BS EN 709 : 1997 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY |
| BS EN 706 : 1997 | AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY |
| BS EN 292-2:1991 | Safety of machinery. Basic concepts, general principles for design Technical principles and specifications |
| BS EN 608:1995 | Agricultural and forestry machinery. Portable chain saws. Safety |
| BS EN 792-5 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| BS EN 894-2 : 1997 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS |
| BS EN 414:2000 | Safety of machinery. Rules for the drafting and presentation of safety standards |
| I.S. EN 547-1:1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| I.S. EN 547-2:1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| I.S. EN 1005-2:2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| UNE-EN 792-13:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 13: FASTENER DRIVING TOOLS. |
| EN 707:1999+A1:2009 | Agricultural machinery - Slurry tankers - Safety |
| UNE-EN 693:2001 | Machine tools - Safety - Hydraulic presses |
| UNE-EN 709:1997 | AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S). SAFETY. |
| I.S. EN 349:1993 | SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN 746-4:2000 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
| EN 909:1998+A1:2009 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
| EN 792-6:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 792-13:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
| UNI EN 13557 : 2008 | CRANES - CONTROLS AND CONTROL STATIONS |
| UNI EN 792-3 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| UNI EN 792-12 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| UNI EN 1093-9 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| UNI EN 13059 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| UNI EN 609-2 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| EN 50144-2-4:1999 | Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders |
| UNI EN 1677-1 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| UNI EN 626-2 : 2008 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES |
| UNI EN 709 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY |
| UNI EN 786 : 2010 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| UNI EN 13118 : 2010 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| UNI EN 547-1 : 2009 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| UNI EN 12198-2 : 2009 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE |
| EN 708:1996/A1:2000 | AGRICULTURAL MACHINERY - SOIL WORKING MACHINES WITH POWERED TOOLS - SAFETY |
| UNI EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| UNI EN 547-2 : 2009 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| UNI EN ISO 11806 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY |
| UNI EN 1677-4 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| UNI EN 1093-6 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| UNI EN 1677-3 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| UNI EN 745 : 2010 | AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY |
| UNI EN 792-2 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| UNI EN 791 : 2009 | DRILL RIGS - SAFETY |
| UNI EN 894-2 : 2009 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS |
| UNI EN 1028-1 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 574 : 2008 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| UNI EN 1028-2 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 13889 : 2009 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
| UNI EN 614-2 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 792-4 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| UNI EN 792-10 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| UNI EN 792-5 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| UNI EN 792-13 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 13478 : 2008 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| UNI EN 908 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY |
| UNI EN 1526 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
| UNI EN 983 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| UNI EN 818-7 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| UNI EN 1088 : 2008 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| UNI EN 13140 : 2010 | AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY |
| UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| UNI EN 792-8 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNI EN 12644-2 : 2008 | CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
| UNI EN 12077-2 : 2008 | CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES |
| UNI EN 12321 : 2009 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| UNI EN 894-3 : 2009 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| UNI EN 792-6 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| UNI EN 894-1 : 2009 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS |
| UNI EN 1010-3 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 1093-8 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| UNI EN 704 : 2010 | AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY |
| UNI EN 1093-7 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| UNI EN 999 : 2008 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| UNI EN 12198-1 : 2009 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| UNI EN 792-9 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| UNI EN 1093-4 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN 693 : 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| UNI EN 1005-3 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| UNI EN 12957 : 2009 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| UNI EN 1005-1 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 12644-1 : 2008 | CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS |
| UNI EN 1677-5 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN ISO 14314 : 2010 | RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS |
| UNI EN 792-1 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| UNI EN 13448 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY |
| UNI EN 909 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| UNI EN 12198-3 : 2008 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| UNI EN 349 : 2008 | SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY |
| UNI EN 1037 : 2008 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| UNI EN 1005-2 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| UNI EN 1677-2 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| UNI EN 12385-10 : 2008 | STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS |
| UNI EN 706 : 2010 | AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY |
| 95/700126 DC : DRAFT JAN 1995 | PREN 1672-1 - FOOD PROCESSING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| DIN EN 707:2015-11 (Draft) | AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY |
| 03/109865 DC : DRAFT JULY 2003 | BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES |
| 00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30076951 DC : 0 | BS EN 12605 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - TEST METHODS |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 02/709474 DC : DRAFT JULY 2002 | BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| I.S. EN 12077-2:1999 | CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES |
| 05/30076959 DC : DRAFT APR 2005 | BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS |
| I.S. EN 294:1994 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| 05/30076926 DC : DRAFT APR 2005 | EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS |
| 00/707658 DC : DRAFT APR 2000 | PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| 97/718229 DC : DRAFT NOV 1997 | PREN 13064 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF HEAVY CLAY AND REFRACTORY PRODUCTS |
| 97/713936 DC : DRAFT AUG 1997 | PREN 13000 - CRANES - SAFETY - MOBILE CRANES |
| 02/705771 DC : DRAFT AUG 2002 | PREN 81-71 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 03/300200 DC : DRAFT JAN 2003 | CENELEC TR 50404 - ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY |
| BS ISO 17894:2005 | Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications |
| 99/706406 DC : DRAFT APR 1999 | PREN 13445-6 - UNFIRED PRESSURE VESSELS - PART 6: SAFETY SYSTEMS |
| 01/105375 DC : DRAFT JUL 2001 | BS EN 474-3 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| 03/314351 DC : 0 | EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| CEI UNI EN 45510-6-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
| 00/708470 DC : DRAFT APR 2000 | PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
| 95/710329 DC : DRAFT JUL 1995 | PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 01/105377 DC : DRAFT JULY 2001 | BS EN 474-5 - EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORSE |
| 00/541672 DC : DRAFT NOV 2000 | BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 98/541503 DC : DRAFT MAY 1998 | PREN 13237-1 - POTENTIALLY EXPLOSIVE ATMOSPHERE - EXPLOSION PREVENTION AND PROTECTION - PART 1: TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 95/710328 DC : 0 | PREN 12044 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURE MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| PREN 1672-2 : DRAFT 2003 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| BS EN 12733 : 2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 96/107552 DC : DRAFT OCT 1996 | BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS |
| 97/720420 DC : DRAFT DEC 1997 | EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY |
| 95/700501 DC : DRAFT JAN 1995 | PREN 1756-1 SPECIFICATION FOR TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
| DIN EN 1037:2008-11 | SAFETY OF MACHINERY - PREVENTATION OF UNEXPECTED START-UP |
| 00/705761 DC : DRAFT FEB 2000 | PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| I.S. CR 1100:1993 | MEMORANDUM ON HEALTH AND SAFETY STANDARDIZATION IN SUPPORT OF "NEW APPROACH" DIRECTIVES - APPLICATION IN THE FIELD OF MACHINERY |
| S.R. CWA 15902-2:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS |
| DIN EN 81-80:2004-02 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| EN 13748 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| PREN 13852 : DRAFT 2000 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| BS EN 12965 : 2003 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY |
| I.S. EN 12733:2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| I.S. EN 81-80:2004 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| UNI EN 12965 : 2010 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY |
| EN 12077-2 : 1998 | CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES |
| NF EN 1804-1 : 2002 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 764-7:2002-09 | PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT |
| DIN EN 13586:2009-05 | Cranes - Access (includes Amendment A1:2008) |
| DIN EN 908:2009-12 | Agricultural and forestry machinery - Reel machines for irrigation - Safety (includes Amendment A1:2009) |
| DIN EN 415-3:2010-07 | Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009) |
| DIN EN 792-13:2009-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN 1093-9:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| DIN EN 818-7:2008-07 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) (includes Amendment A1:2008) |
| DIN EN 1093-4:2008-09 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method (includes Amendment A1:2008) |
| DIN EN 12077-2:2008-12 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices (includes Amendment A1:2008) |
| DIN EN 12644-2:2009-06 | CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
| DIN EN 706:2009-12 | Agricultural machinery - Vine shoot tipping machines - Safety (includes Amendment A1:2009) |
| BS EN 764-7:2002 | Pressure equipment Safety systems for unfired pressure vessels |
| BS EN 547-1 : 1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| BS EN 1010-3 : 2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| BS EN 12198-1 : 2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| BS EN 792-11 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| BS EN 12639:2000 | Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy |
| BS EN 1028-1 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 415-4:1998 | Safety of packaging machines Palletizers and depalletizers |
| BS EN 908 : 1999 | AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY |
| BS EN 1093-4 : 1996 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD |
| BS EN 1005-1 : 2001 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| BS EN 1525:1998 | Safety of industrial trucks. Driverless trucks and their systems |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| 98/705686 DC : DRAFT MAR 1998 | PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
| BS EN 1005-2 : 2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| BS EN 1677-1 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| BS EN 1834-1:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
| BS EN 13736 : 2003 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| BS EN 1010-4 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| BS EN 14175-2:2003 | Fume cupboards Safety and performance requirements |
| BS EN 1553:2000 | Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements |
| BS EN 818-7 : 2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| BS EN 894-1 : 1997 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS |
| BS EN 1757-2:2001 | Safety of industrial trucks. Pedestrian propelled trucks Pallet trucks |
| BS EN 415-3 : 2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| BS EN 1726-2:2000 | Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| BS EN 349 : 1993 | SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY |
| BS EN 13478 : 2002 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| BS EN 13140 : 2000 | AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY |
| BS EN 1746:1999 | Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| BS EN 746-4:2000 | Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing thermoprocessing equipment |
| BS EN 12644-2 : 2000 | CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
| ISO 14314:2004 | Reciprocal internal combustion engines Recoil starting equipment General safety requirements |
| BS EN 1757-4:2003 | Safety of industrial trucks. Pedestrian propelled trucks Scissor lift pallet-trucks |
| BS EN 693 : 2001 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| BS EN 983 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| BS EN 1677-5 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| BS EN 792-13 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| BS EN 12957 : 2001 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| BS EN 1677-4 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| BS EN 1037 : 1996 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| BS EN 1093-7 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| UNE-EN ISO 14314:2010 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| BS EN ISO 11111:1996 | Safety requirements for textile machinery |
| BS EN 13862 : 2001 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| BS EN 1834-2:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| BS EN 1093-9 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| BS EN 12469:2000 | Biotechnology. Performance criteria for microbiological safety cabinets |
| UNE-EN 13140:2001 | AGRICULTURAL MACHINERY. SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT. SAFETY. |
| BS EN 626-1 : 1995 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS |
| BS EN 13059 : 2002 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| BS EN ISO 11806:2008 | Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety |
| BS EN 1088 : 1995 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| BS EN 791 : 1996 | DRILL RIGS - SAFETY |
| BS EN 1804-1 : 2001 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS |
| DIN EN 999:2008-10 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY |
| DIN EN 792-11:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| EN ISO 11806:2008 | Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) |
| EN 908:1999+A1:2009 | Agricultural and forestry machinery - Reel machines for irrigation - Safety |
| EN 706:1996+A1:2009 | Agricultural machinery - Vine shoot tipping machines - Safety |
| EN 13140:2000+A1:2009 | Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety |
| EN 792-5:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 609-2:1999+A1:2009 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 792-7:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 907 : 1997 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
| EN 1757-4 : 2003 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| EN 792-10:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| EN 14175-2:2003 | Fume cupboards - Part 2: Safety and performance requirements |
| EN 746-8:2000 | Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| EN 792-8:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
| EN 1870-2:1999/AC:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| EN 632 : 1995 | AGRICULTURAL MACHINERY - COMBINE HARVESTERS AND FORAGE HARVESTERS - SAFETY |
| EN 1552:2003 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems |
| EN 774:1996/A3:2001 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| EN ISO 14314:2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| EN 792-4:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 608 : 1994 | AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE CHAIN SAWS - SAFETY |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 626-2:1996+A1:2008 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| EN 792-11:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 792-1:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
| EN 746-5:2000 | Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment |
| EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 693 : 2001 COR 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 792-9:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
| EN 704:1999+A1:2009 | Agricultural machinery - Pick-up balers - Safety |
| EN 1553 : 1999 | AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS |
| EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| EN 745:1999+A1:2009 | Agricultural machinery - Rotary mowers and flail-mowers - Safety |
| EN 792-2:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
| EN 1677-3:2001+A1:2008 | Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
| EN 792-3:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 1746:1998 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| EN 792-12:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN 786:1996+A2:2009 | Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 1454 : 1997 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
| NF EN 50308 : 2004 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| DIN EN 12733:2016-08 (Draft) | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| PREN 12693 : DRAFT 1996 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| I.S. EN 563:1994 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| I.S. EN 774:1996 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| I.S. EN 792-7:2002 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| 03/306308 DC : DRAFT JUNE 2003 | EN 1005-5 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 5: RISK ASSESSMENT FOR REPETITIVE HANDLING AT HIGH FREQUENCY |
| 03/112610 DC : DRAFT AUG 2003 | EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY |
| 98/265367 DC : DRAFT DEC 1998 | BS EN 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURE IN RELATION TO MACHINERY |
| 04/30111716 DC : DRAFT MAR 2004 | EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| 03/112612 DC : DRAFT AUG 2003 | EN 14710-2 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| 03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 03/306595 DC : 0 | BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 01/105380 DC : DRAFT JULY 2001 | BS EN 474-8 - EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS |
| 98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| 03/317581 DC : DRAFT OCT 2003 | EN 1151-1 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: NON-AUTOMATIC CIRCULATION PUMPS, REQUIREMENTS, TESTING, MARKING |
| 98/700933 DC : DRAFT JAN 1998 | PREN 13102 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF FINE CLAY TILES |
| 97/700976 DC : DRAFT JAN 1997 | PREN 12692 - CERAMIC MACHINES - SAFETY - PRESSES |
| 02/706761 DC : DRAFT MAY 2002 | PREN 14461 - INDUSTRIAL FANS - SAFETY REQUIREMENTS |
| 00/706812 DC : DRAFT MAR 2000 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
| 98/110481 DC : DRAFT 1998 | PREN 474-12 - EARTH MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
| 93/703129 DC : 0 | FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY REQUIREMENTS |
| 03/104284 DC : DRAFT FEB 2003 | EN 1672-2 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
| 97/700630 DC : DRAFT JAN 1997 | PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| 96/108461 DC : 0 | PREN 12649 - CONCRETE COMPACTORS AND FLOATING MACHINES - SAFETY REQUIREMENTS |
| PREN 1005-4 : DRAFT 1998 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES IN RELATION TO MACHINERY |
| 02/711304 DC : DRAFT SEP 2002 | BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES |
| BS ISO 16156:2004 | Machine-tools safety. Safety requirements for the design and construction of work holding chucks |
| 02/705139 DC : DRAFT APR 2002 | PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| DIN EN 1853:2015-11 (Draft) | AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY |
| I.S. CLC/TR 50404:2006 | ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY |
| GOST R EN 818-2 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 8 CHAIN SLINGS |
| GOST R EN 818-4 : 2005 | SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8 |
| ISO 17894:2005 | Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications |
| EN 12733:2001+A1:2009 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
| I.S. EN 50260-1:2002 | SAFETY OF HAND-HELD BATTER-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS |
| S.R. CR 954-100:1999 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996 |
| DIN EN 792-2:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| DIN EN 13448:2010-02 | Agricultural and forestry machinery - Inter-row mowing units - Safety (includes Amendment A1:2009) |
| DIN EN 1028-1:2008-09 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements (includes Amendment A1:2008) |
| DIN EN 614-2:2008-12 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS |
| DIN EN 12198-3:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING |
| DIN EN 609-2:2010-07 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters (includes Amendment A1:2009) |
| DIN EN 792-9:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 13557:2009-07 | Cranes - Controls and control stations; German version EN 13557:2003+A2:2008 |
| DIN EN 792-10:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| DIN EN 709:2011-06 | Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009) |
| BS EN 12385-10 : 2003 | STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS |
| BS EN 792-1 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| BS EN 745 : 1999 | AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY |
| BS EN 792-3 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 13557 : 2003 | CRANES - CONTROLS AND CONTROL STATIONS |
| BS EN 609-2 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 547-2 : 1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| BS EN 746-5:2000 | Industrial thermoprocessing equipment Particular safety requirements for salt bath thermoprocessing equipment |
| BS EN 1677-2 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| BS EN 792-9 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| BS EN 792-7 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| BS EN 1677-6 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| BS EN 1005-3 : 2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| BS EN 1552:2003 | Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems |
| DIN EN 704:1999-08 | AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY |
| DIN EN 626-2:2008-09 | SAFETY OF MACHINERY - REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 1151 : 1999 | PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - REQUIREMENTS, TESTING, MARKING |
| DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| DIN EN ISO 11806:2009-01 | AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY |
| EN 50308 : 2004 COR 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| DIN EN 745:1999-08 | AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY |
| DIN EN 574:2008-12 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1: General requirements |
| EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 12957:2001+A1:2009 | Machine tools - Safety - Electro discharge machines |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| DIN EN 983:1996-09 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| DIN EN ISO 11806:1997-11 | AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY |
| DIN EN 983:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| DIN EN 792-12:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| DIN EN 626-1:2008-09 | SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| DIN EN 792-10:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 704:2009-12 | AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY |
| UNE-EN 415-3:2000 | Safety of packaging machines. Part 3: Form, fill and seal machines. |
| UNE-EN 1804-1:2003 | Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns. |
| ONORM EN 13557 : 2009 | CRANES - CONTROLS AND CONTROL STATIONS |
| UNE-EN 1010-4:2004 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| UNE-EN 1010-3:2003 | Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines. |
| ONORM EN 12077-2 : 2008 | CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.