IEEE DRAFT 666 : D5 2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
DESIGN GUIDE FOR ELECTRIC POWER SERVICE SYSTEMS FOR GENERATING STATIONS
Published date
12-01-2013
Superseded date
04-05-2007
Sorry this product is not available in your region.
1 Overview
2 Scope
3 System philosophy
4 Startup and shutdown requirements
5 Nominal system voltage
6 Fault considerations
Annex 6A (informative) Short-circuit current calculation examples
7 System protection
8 System grounding
9 Transformers and voltage regulation
10 Equipment Used for Load Switching and Fault Isolation
11 Electric motor characteristics and applications
12 Cables and other conductors
13 Physical and environmental aspects
Pertains to all types of power generating stations, it is particularly applicable to stations in which the electric power service system is required to perform continuously. When electric power for auxiliary loads is supplied from the power grid, the service system begins at the point where the tap from the power grid terminates, either at a station service bus or at the terminals of the transformer that supplies the bus.
| DocumentType |
Draft
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| IEEE C37.91-2008 REDLINE | IEEE Guide for Protecting Power Transformers |
| IEEE C57.12.51-2008 | REQUIREMENTS FOR SEALED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 208Y/120 TO 4160 VOLTS |
| NEMA TR1 : 2013 | TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS |
| IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| IEEE C57.12.10-2010 | TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT |
| IEEE C37.14-2015 REDLINE | IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE C37.90-2005 | IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
| ANSI C37.16-2009 | LOW-VOLTAGE POWER CIRCUIT BREAKERS AND AC POWER CIRCUIT PROTECTORS - PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS |
| NEMA WC 74 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| IEEE 32-1972 | IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| NEMA PB 1:2011 | Panelboards |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| IEEE C37.17-2012 | TRIP DEVICES FOR AC AND GENERAL PURPOSE DC LOW VOLTAGE POWER CIRCUIT BREAKERS |
| NEMA WC 70 : 2009 | POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY |
| IEEE 383-2015 | IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities |
| IEEE 532-2007 REDLINE | IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| IEEE C57.13.3-2014 REDLINE | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| ANSI/NEMA WC 51/ICEA P-54-440:2009(R2014) | Ampacities of Cables Installed in Cable Trays |
| NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.91-2011 REDLINE | IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C57.96-2013 | IEEE Guide for Loading Dry-Type Distribution and Power Transformers |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
| IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) (Color Book® Series) |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C57.12.52-2012 | Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEEE C37.13-2015 REDLINE | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| ANSI Z55.1 : 1967 | INDUSTRIAL APPARATUS AND EQUIPMENT, GRAY FINISHES FOR |
| IEEE 484-2002 | IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C57.109-1993 | IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE C37.06-2009 | AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/NEMA PB 1.1:2013 | General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| IEEE 450-2010 REDLINE | IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
| IEEE 690-2004 | IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
| IEEE C37.24-2003 | IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
| ANSI/NEMA C50.41 : 2012 | POLYPHASE INDUCTION MOTORS FOR POWER GENERATION STATIONS |
| IEEE C62.92.3-2012 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems |
| IEEE C37.27-2008 REDLINE | IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses |
| IEEE C57.100-2011 | IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers |
| IEEE 422-2012 | IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities |
| IEEE C57.12.70-2011 | IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers |
| IEEE C57.12.91-2011 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| IEEE 946-2004 | IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
| IEEE C37.23-2003 | IEEE Standard for Metal-Enclosed Bus |
| IEEE C57.12.50 : 1981 | REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS |
| NEMA AB 1:2002 | Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures |
| ANSI/NEMA WC 71/ICEA S-96-659:2014 | Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy |
| IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
| IEEE 485-2010 | IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
| NEMA PE 5:1997(R2003) | Utility-Type Battery Chargers |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| IEEE C50.13-2014 | IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
| IEEE C57.131-2012 | IEEE Standard Requirements for Tap Changers |
Summarise
Sorry this product is not available in your region.