KTA 3211.1 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
Superseded date
04-07-2019
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Fundamentals
1 Scope
2 Definitions
3 General principles
4 Generally applicable stipulations for materials and
material tests
5 Product forms of ferritic steels of material group W I
6 Product forms of ferritic steels of material group W II
7 Product forms of austenitic steels
8 Bolts and nuts
9 Product forms of steels for special loads
10 Heat-exchanger tubes
11 Non-destructive tests and examinations
Annex A: Material characteristic data
Annex AP: Reference data on physical characteristics
Annex B: Production welds of steel castings
Annex C: Procedure for determining the delta ferrite
content
Annex D: Performance of manual ultrasonic testing
Annex E: Performance of surface inspections by magnetic
particle and penetrant methods
Annex F: Regulations and literature referred to in this
Safety Standard
Annex G: Changes with respect to the edition 2000-06
(informative)
Pertains to the materials and product forms of the pressure-retaining walls of pressure- and activity-containing light-water-reactor systems and components that do not belong to the reactor-coolant pressure boundary but have relevance specifically to reactor engineered safety.
| DevelopmentNote |
DRAFT 2017 issued in November 2017. (12/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Kerntechnischer Ausschuss
|
| Status |
Superseded
|
| SupersededBy |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| KTA 3103 : 2015(R2017) | SHUTDOWN SYSTEMS FOR LIGHT WATER REACTORS |
| KTA 3206 : 2014(R2017)Berichtigung:2019 | BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN ISO 7963:2010 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 10893-3:2011 | Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 26157-3:1991 | Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988) |
| ISO 8496:2013 | Metallic materials Tube Ring tensile test |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| VDTUEV 354/3 WERKSTOFFBLAETTER : 2013 SUPP 2015 | WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSTRECKGRENZE VON 355 MPA FLANSCH, RING, HOHLKOERPER, SCHMIEDESTUECK, STABSTAHL |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| ISO 2400:2012 | Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
| ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| DIN EN ISO 10484:2014-06 (Draft) | WIDENING TEST ON NUTS |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| ISO 6507-4:2005 | Metallic materials Vickers hardness test Part 4: Tables of hardness values |
| EN ISO 19232-3:2013 | Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013) |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| DIN EN 10222-2:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
| EN ISO 10484:2004 | Widening test on nuts (ISO 10484:1997) |
| DIN EN ISO 10893-8:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN ISO 9606-1:2013-12 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| DIN EN 12668-2:2010-06 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| DIN EN 10228-1:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| KTA 3211.3 : 2012 COR 2016 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 3: MANUFACTURE |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| ISO 3059:2012 | Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions |
| VDTUEV 354/1 WERKSTOFFBLAETTER : 2017 SUPP 2017 | WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSTRECKGRENZE VON 355 MPA BLECH, BREITFLACHSTAHL, BAND, FORM- UND STABSTAHL |
| DIN EN 12668-1:2010-05 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| DIN EN 12681:2003-06 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EN ISO 3452-3:2013 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| DIN EN ISO 19232-1:2013-12 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
| ISO 14174:2012 | Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification |
| EN ISO 8495:2013 | Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| DIN EN ISO 2400:2013-01 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| DIN EN ISO 6507-4:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES |
| EN ISO 8496:2013 | Metallic materials - Tube - Ring tensile test (ISO 8496:2013) |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| ISO 10484:1997 | Widening test on nuts |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 9934-3:2015 | Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015) |
| DIN EN 13018:2016-06 | NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 8495:2014-03 | METALLIC MATERIALS - TUBE - RING-EXPANDING TEST (ISO 8495:2013) |
| DIN EN ISO 7963:2010-12 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| EN ISO 8249:2000 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| DIN EN ISO 8492:2014-03 | Metallic materials – Tube – Flattening test (ISO 8492:2013); German version EN ISO 8492:2013<br> |
| DIN EN ISO 13916:1996-11 | WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE (ISO 13916:2017) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 6506-4:2014 | Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014) |
| EN 1330-4:2010 | Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing |
| DIN EN 10028-7:2016-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| DIN EN 12668-3:2014-02 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10228-3:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| DIN EN ISO 9934-1:2016-07 (Draft) | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 1: GENERAL PRINCIPLES (ISO 9934-1:2016) |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| AD 2000-MERKBLATT W5:2009 | CAST STEEL |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| DIN EN ISO 1127:1997-03 | STAINLESS STEEL TUBES - DIMENSIONS, TOLERANCES AND CONVENTIONAL MASSES PER UNIT LENGTH |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
| DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN ISO 14174:2012 | Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012) |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN ISO 11699-1:2011 | Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008) |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| DIN EN 1371-1:2012-02 | Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings |
| EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| KTA 1401 : 2013 | GENERAL REQUIREMENTS REGARDING QUALITY ASSURANCE |
| EN ISO 2400:2012 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN ISO 643:2015-06 (Draft) | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| DIN EN ISO 10893-2:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| DIN 50104:1983-11 | TESTING OF HOLLOW BODIES BY INTERNAL PRESSURE; LEAK DETECTION UP TO A CERTAIN PRESSURE VALUE; GENERAL SPECIFICATIONS |
| EN 1370:2011 | Founding - Examination of surface condition |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| ISO 19232-3:2013 | Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes |
| DIN EN 10228-2:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| DIN EN ISO 10893-5:2011-07 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011 |
| DIN EN ISO 3059:2013-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING AND MAGNETIC PARTICLE TESTING - VIEWING CONDITIONS (ISO 3059:2012) |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| VDTUEV 452 WERKSTOFFBLAETTER : 2011 | Martensitic steel casting G-X4 CrNi 13 4 / GX 3 CrNi 13 4 Material no.1.4317 / material no.1,6982 hollow castings, solid castings, cast valve housings, pump housings, impellers and guide wheels, machine parts for hydraulic systems |
| DIN EN ISO 8496:2014-03 | METALLIC MATERIALS - TUBE - RING TENSILE TEST (ISO 8496:2013) |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| DIN EN 1330-4:2010-05 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 4: TERMS USED IN ULTRASONIC TESTING |
| EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| VDTUEV 113/2 WERKSTOFFBLAETTER : 2001 SUPP 2001 | WERKSTOFFBLAETTER - HOCHWARMFESTER AUSTENITISCHER WALZ- UND SCHMIEDESTAHL X8CRNIMOBNB16-16+WK, WERKSTOFF-NR. 1.4986+WK |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| DIN EN ISO 3506-2:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| DIN EN ISO 5173:2012-02 | Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011) |
| DIN EN ISO 8249:2000-10 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| ISO 11699-1:2008 | Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography |
| EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| KTA 1408.2 : 2015 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 2: MANUFACTURE |
| ISO 6506-4:2014 | Metallic materials — Brinell hardness test — Part 4: Table of hardness values |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| ISO 8495:2013 | Metallic materials Tube Ring-expanding test |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| DIN EN 10228-4:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 9934-2:2015 | Non-destructive testing — Magnetic particle testing — Part 2: Detection media |
| DIN EN 1370:2012-03 | FOUNDING - EXAMINATION OF SURFACE CONDITION |
| EN 1369:2012 | Founding - Magnetic particle testing |
| DIN EN ISO 10893-4:2011-07 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 9934-3:2015 | Non-destructive testing — Magnetic particle testing — Part 3: Equipment |
| DIN EN ISO 9934-3:2015-12 | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 3: EQUIPMENT (ISO 9934-3:2015) |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| SEW 088 : 2017 | WELDABLE NON-ALLOY AND LOW-ALLOY STEELS - RECOMMENDATIONS FOR PROCESSING, IN PARTICULAR FOR FUSION WELDING |
| DIN EN ISO 11699-1:2012-01 | Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008) |
| EN 12681:2003 | Founding - Radiographic examination |
| EN 13018:2016 | Non-destructive testing - Visual testing - General principles |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| DIN EN 10222-4:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| AD MERKBLATT W2 : 2000 | MATERIALS - AUSTENITIC STEELS |
| EN ISO 9934-2:2015 | Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| EN 12668-3:2013 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
| EN ISO 6157-2:2004 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| KTA 1408.1 : 2015 COR 2016 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 1: QUALIFICATION TESTING |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 10893-4:2011 | Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
| KTA 1408.3 : 2015 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 3: PROCESSING |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| DIN EN ISO 5579:2014-04 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC TESTING OF METALLIC MATERIALS USING FILM AND X- OR GAMMA RAYS - BASIC RULES (ISO 5579:2013) |
| ISO 8249:2000 | Welding Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| DIN EN ISO 9934-2:2015-12 | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015) |
| DIN EN ISO 19232-3:2014-02 | NON-DESTRUCTIVE TESTING - IMAGE QUALITY OF RADIOGRAPHS - PART 3: IMAGE QUALITY CLASSES (ISO 19232-3:2013) |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| DIN EN ISO 10893-3:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN 10273:2016-10 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN EN ISO 14284:2003-02 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| VDTUEV 352/1 WERKSTOFFBLAETTER : 2017 SUPP 2017 | WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSRECKGRENZ VON 275 MPA BAND, BLECH, BREITFACHSTAHL, FORM- UND STABSTAHL |
| EN ISO 3059:2012 | Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012) |
| DIN EN 10163-2:2005-03 | Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004 |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.