NFPA 1 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIRE CODE
Available format(s)
Hardcopy
Superseded date
23-02-2021
Superseded by
Language(s)
English
Published date
01-01-2018
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Explains minimum requirements necessary to establish a reasonable level of fire and life safety and property protection from the hazards created by fire, explosion, and dangerous conditions.
| DevelopmentNote |
Also available with NFPA 1 HDBK (See NFPA 1 SET). (08/2011) 2012 Edition is also available in Spanish Language, See NFPA 1 SPANISH. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
802
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| NFPA 1142 : 2017 | WATER SUPPLIES FOR SUBURBAN AND RURAL FIRE FIGHTING |
| NFPA 1006 : 2017 | TECHNICAL RESCUE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| IEEE 1578-2007 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 555 : 2017 | METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER |
| NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
| NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 1144 : 2018 | REDUCING STRUCTURE IGNITION HAZARDS FROM WILDLAND FIRE |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| NFPA 92 : 2018 | SMOKE CONTROL SYSTEMS |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
| NFPA 1202 : 1982 | ORGANIZATION OF A FIRE DEPARTMENT |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
| IEEE 1679.1-2017 | IEEE Guide for the Characterization and Evaluation of Lithium-Based Batteries in Stationary Applications |
| NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| NFPA 471 : 2002 | RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
| IEEE 1661-2007 | IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
| ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
| ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
| NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
| NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| NFPA 1194 : 2018 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
| NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
| NFPA 471 SPANISH : 2002 | RECOMMENDED PRACTICE FOR RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
| NFPA 1143 : 2018 | WILDLAND FIRE MANAGEMENT |
| IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
| NFPA 1720 : 2014 | ORGANIZATION AND DEPLOYMENT OF FIRE SUPPRESSION OPERATIONS, EMERGENCY MEDICAL OPERATIONS, AND SPECIAL OPERATIONS TO THE PUBLIC BY VOLUNTEER FIRE DEPARTMENTS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| NFPA 75 : 2017 | FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| IEEE DRAFT 1184 : D21 2006 | GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| IEEE 1818-2017 | IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations |
| NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| ASTM F 793/F793M : 2015 : REDLINE | Standard Classification of Wall Coverings by Use Characteristics |
| ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
| NFPA 1710 : 2016 | ORGANIZATION AND DEPLOYMENT OF FIRE SUPPRESSION OPERATIONS, EMERGENCY MEDICAL OPERATIONS, AND SPECIAL OPERATIONS TO THE PUBLIC BY CAREER FIRE DEPARTMENTS |
| NFPA 25 HANDBOOK : 2011 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| IEEE 1361-2014 | IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems |
| ANSI A10.7 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| ASTM E 3082 : 2017 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
| NFPA 1620 : 2020 | Standard for Pre-Incident Planning |
| NFPA 400 : 2019 | Hazardous Materials Code |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| IEEE 1578-2018 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
| NFPA 30B:2023 | Manufacture and Storage of Aerosol Products |
| PIP PNE00003 : 2019 | Process Unit and Offsites Layout Guide |
| NFPA 1006:2021 | Standard for Technical Rescue Personnel Professional Qualifications |
| NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
| NFPA 484:2022 | Standard for Combustible Metals |
| NFPA 307:2021 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves |
| PIP ELSSG11 : 2017 | ELECTRICAL POWER CENTER SPECIFICATION |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| UL 340:6ED 2017-07-24 | Tests for Comparative Flammability of Liquids |
| ISA 61241-10 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| NFPA 1194 : 2018 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| API SPEC 12D : 2017 | SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| CFR 33(PTS125-199) : JUL 2017 | NAVIGATION AND NAVIGABLE WATERS |
| NFPA 652 : 2016 | FUNDAMENTALS OF COMBUSTIBLE DUST |
| API 1529 : 1998 | AVIATION FUELING HOSE |
| UL 1803:4ED 2012-02-15 | Factory Follow-Up on Third Party Certified Portable Fire Extinguishers |
| UL 1313:3ED 2015-12-16 | Standard for Nonmetallic Safety Cans for Petroleum Products |
| NFPA 22 : 2013 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| NFPA 495 : 2013 | EXPLOSIVE MATERIALS CODE |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| UL 555:7ED 2006-07-12 | Fire Dampers |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| UL 626:8ED 2005-02-28 | Water Fire Extinguishers |
| NFPA 288 : 2017 | STANDARD METHODS OF FIRE TESTS OF HORIZONTAL FIRE DOOR ASSEMBLIES INSTALLED IN HORIZONTAL FIRE RESISTANCE-RATED ASSEMBLIES |
| IAPMO UNIFORM PLUMBING CODE : 2012 | 2012 UNIFORM PLUMBING CODE |
| CFR 33(PTS1-199) : JUL 89 | NAVIGATION AND NAVIGABLE WATERS |
| API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| UL 9:8ED 2009-07-02 | Standard for Fire Tests of Window Assemblies |
| NFPA 232 : 2017 | PROTECTION OF RECORDS |
| ASTM E 1491 : 2006 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| UL 896:5ED 1993-07-29 | Oil-Burning Stoves |
| FAA AC 150/5390-2 : 2004 | HELIPORT DESIGN |
| UL 1640:4ED 2016-11-14 | Portable Power-Distribution Equipment |
| NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
| ASTM D 1929 : 2016 : REDLINE | Standard Test Method for Determining Ignition Temperature of Plastics |
| NFPA 731 : 2017 | INSTALLATION OF ELECTRONIC PREMISES SECURITY SYSTEMS |
| CFR 21(PTS200-299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 200-299 |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASTM E 1353 : 2016 : REDLINE | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| NFPA 75 : 2017 | FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT |
| NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
| NFPA 241 : 2013 | SAFEGUARDING CONSTRUCTION, ALTERATION, AND DEMOLITION OPERATIONS |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| ASTM D 5391 : 2014 : REDLINE | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| FM 4996 : 2013 | CLASSIFICATION OF PALLETS AND OTHER MATERIAL HANDLING PRODUCTS AS EQUIVALENT TO WOOD PALLETS |
| NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| NFPA 34 : 2015 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| BHMA A156.3 : 2014 | EXIT DEVICES |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
| NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
| NFPA 1033 : 2014 | PROFESSIONAL QUALIFICATIONS FOR FIRE INVESTIGATOR |
| UL 2208:3ED 2010-07-08 | Standard for Solvent Distillation Units |
| AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| IEC 61340-4-4:2012+AMD1:2014 CSV | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC) |
| NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| NFPA 703 : 2018 | FIRE RETARDANT-TREATED WOOD AND FIRE-RETARDANT COATINGS FOR BUILDING MATERIALS |
| FAA AC 150/5390-3 : 0 | |
| NFPA 1031 : 2014 | PROFESSIONAL QUALIFICATIONS FOR FIRE INSPECTOR AND PLAN EXAMINER |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 102 : 2016 | GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| UL 305:6ED 2012-07-12 | Panic Hardware |
| UL 900:8ED 2015-04-21 | Air Filter Units |
| ISO 10298:2010 | Determination of toxicity of a gas or gas mixture |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 302 : 2010 | PLEASURE AND COMMERCIAL MOTOR CRAFT |
| ASTM D 6448 : 2016 : REDLINE | Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
| UL 1746:3ED 2007-01-17 | Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| AWWA M14 : 3 | RECOMMENDED PRACTICE FOR BACKFLOW PREVENTION AND CROSS-CONNECTION CONTROL |
| UL 2080:1ED 2000-03-14 | Standard for Fire Resistant Tanks for Flammable and Combustible Liquids |
| NFPA 80A : 2017 | PROTECTION OF BUILDINGS FROM EXTERIOR FIRE EXPOSURES |
| NFPA 501 : 2017 | MANUFACTURED HOUSING |
| ASME B31.3:2016 | PROCESS PIPING |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| UL 737:10ED 2011-04-25 | Standard for Fireplace Stoves |
| NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
| ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| NFPA 13R : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN LOW-RISE RESIDENTIAL OCCUPANCIES |
| CGA P 18 : 2013 | STANDARD FOR BULK INERT GAS SYSTEMS |
| UL 8:7ED 2016-11-25 | Water Based Agent Fire Extinguishers |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
| NFPA 2113 : 2012 | SELECTION, CARE, USE, AND MAINTENANCE OF FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST SHORT-DURATION THERMAL EXPOSURES FROM FIRE |
| NFPA 1127 : 2018 | CODE FOR HIGH POWER ROCKETRY |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| NFPA 498 : 2013 | SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES |
| NFPA 3 : 2018 | COMMISSIONING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| ASTM E 108 : 2017 : REDLINE | Standard Test Methods for Fire Tests of Roof Coverings |
| UL 2079:5ED 2015-08-26 | Tests for Fire Resistance of Building Joint Systems |
| UL 10B:10ED 2008-02-07 | Standard for Fire Tests of Door Assemblies |
| CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| CFR 33(PTS200-END) : JUL 2017 | NAVIGATION & NAVIGABLE WATERS |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| NFPA 403 : 2018 | AIRCRAFT RESCUE AND FIRE-FIGHTING SERVICES AT AIRPORTS |
| CGA P 1 : 2015 | STANDARD FOR SAFE HANDLING OF COMPRESSED GASES IN CONTAINERS |
| NFPA 291 : 2016 | FIRE FLOW TESTING AND MARKING OF HYDRANTS |
| NFPA 88A : 2015 | PARKING STRUCTURES |
| UL 1040:1ED 1996-08-09 | Fire Test of Insulated Wall Construction |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| CGA C 6.2 : 2013 | STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 1600 : 2016 | DISASTER/EMERGENCY MANAGEMENT AND BUSINESS CONTINUITY/CONTINUITY OF OPERATIONS PROGRAMS |
| NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
| AWWA G200 : 2015 | DISTRIBUTION SYSTEMS OPERATION AND MANAGEMENT |
| ASTM E 1515 : 2014 : REDLINE | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| NFPA 1123 : 2018 | Code for Fireworks Display<br> |
| UL 79:10ED 2016-04 | Power-Operated Pumps for Petroleum Dispensing Products |
| API 1632 : 1996 | CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS |
| NFPA 1925 : 2013 | MARINE FIRE-FIGHTING VESSELS |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| NFPA 24 : 2016 | INSTALLATION OF PRIVATE FIRE SERVICE MAINS AND THEIR APPURTENANCES |
| ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| NFPA 101A : 2016 | ALTERNATIVE APPROACHES TO LIFE SAFETY |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| UL 1975:3ED 2006-11-27 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
| UL 1037:6ED 2016-09-09 | Antitheft Alarms and Devices |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ISO 8115:1986 | Cotton bales Dimensions and density |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 1122 : 2018 | CODE FOR MODEL ROCKETRY |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| IIAR 7 : 2013 | DEVELOPING OPERATING PROCEDURES FOR CLOSED-CIRCUIT AMMONIA MECHANICAL REFRIGERATING SYSTEMS |
| CGA P 20 : JUNE 2017 | STANDARD FOR CLASSIFICATION OF TOXIC GAS MIXTURES |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| FM 6921 : 2004 | CONTAINERS FOR COMBUSTIBLE WASTE |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ASME A17.3 : 2015 | SAFETY CODE FOR EXISTING ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELECTRIC AND HYDRAULIC ELEVATORS AND ESCALATORS |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| ASTM E 1352 : 2016 : REDLINE | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 2021 : 2015 : REDLINE | Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers |
| ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
| ASTM E 1591 : 2013 | Standard Guide for Obtaining Data for Fire Growth Models |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| IIAR 8 : 2015 ERRATA 2015 | DECOMMISSIONING OF CLOSED-CIRCUIT AMMONIA REFRIGERATION SYSTEMS |
| NFPA 86 : 2015 | OVENS AND FURNACES |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| NFPA 1142 : 2017 | WATER SUPPLIES FOR SUBURBAN AND RURAL FIRE FIGHTING |
| ASTM F 2200 : 2017 : REDLINE | Standard Specification for Automated Vehicular Gate Construction |
| NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
| NFPA 260 : 2013 | STANDARD METHODS OF TESTS AND CLASSIFICATION SYSTEM FOR CIGARETTE IGNITION RESISTANCE OF COMPONENTS OF UPHOLSTERED FURNITURE |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| NFPA 13E : 2015 | FIRE DEPARTMENT OPERATIONS IN PROPERTIES PROTECTED BY SPRINKLER AND STANDPIPE SYSTEMS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| NFPA 26 : 1988 | SUPERVISION OF VALVES CONTROLLING WATER SUPPLIES |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA 601 : 2015 | SECURITY SERVICES IN FIRE LOSS PREVENTION |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| NFPA 408 : 2017 | AIRCRAFT HAND PORTABLE FIRE EXTINGUISHERS |
| NFPA 312 : 2011 | FIRE PROTECTION OF VESSELS DURING CONSTRUCTION, CONVERSION, REPAIR, AND LAY-UP |
| NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| UL 10C:3ED 2016-06-09 | Positive Pressure Fire Tests of Door Assemblies |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 610 : 2014 | EMERGENCY AND SAFETY OPERATIONS AT MOTORSPORTS VENUES |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 251 : 2006 | FIRE RESISTANCE OF BUILDING CONSTRUCTION AND MATERIALS |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ASTM D 4207 : 1991 | Test Method for Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Withdrawn 1998) |
| NFPA 1037 : 2016 | FIRE MARSHAL PROFESSIONAL QUALIFICATIONS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 4 : 2018 | INTEGRATED FIRE PROTECTION AND LIFE SAFETY SYSTEM TESTING |
| NFPA 261 : 2013 | TEST FOR DETERMINING RESISTANCE OF MOCK-UP UPHOLSTERED FURNITURE MATERIAL ASSEMBLIES TO IGNITION BY SMOLDERING CIGARETTES |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| NFPA 1730 : 2016 | ORGANIZATION AND DEPLOYMENT OF FIRE PREVENTION INSPECTION AND CODE ENFORCEMENT, PLAN REVIEW, INVESTIGATION, AND PUBLIC EDUCATION OPERATIONS TO THE PUBLIC |
| CFR 30(PTS1-199) : JUL 2017 | MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR |
| UL 555S:5ED 2014-02-13 | Smoke Dampers |
| CFR 33(PTS1-124) : JUL 2017 | NAVIGATION AND NAVIGABLE WATERS |
| NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
| NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
| NFPA 402 : 2013 | AIRCRAFT RESCUE AND FIRE FIGHTING OPERATIONS |
| NACE RP 02 85 : 2002 | CORROSION CONTROL OF UNDERGROUND STORAGE TANK SYSTEMS BY CATHODIC PROTECTION |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| NFPA 257 : 2017 | FIRE TEST FOR WINDOW AND GLASS BLOCK ASSEMBLIES |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
| NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| IIAR 2 : 2014 | SAFE DESIGN OF CLOSED-CIRCUIT AMMONIA REFRIGERATION SYSTEMS |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NACE RP 01 69 : 2002 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| CSA/ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 204 : 2015 | SMOKE AND HEAT VENTING |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ASTM E 2768 : 2011 | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
| CFR 28(PTS 0-42) : JUL 2017 | JUDICIAL ADMINISTRATION - DEPARTMENT OF JUSTICE |
| ASTM D 2843 : 2016 : REDLINE | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| UL 2245:2ED 2006-12-28 | Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks |
| NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
| UL 923:7ED 2013-05-01 | Microwave Cooking Appliances |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
| ISA 12.10.05 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| UL 2129:3ED 2017-01-05 | Halocarbon Clean Agent Fire Extinguishers |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| AWS F4.1 : 2007 | SAFE PRACTICES FOR THE PREPARATION OF CONTAINERS AND PIPING FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ASHRAE 15 : 2013 | SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| ASTM E 2336 : 2016 : REDLINE | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| CGA P 23 : 2015 | STANDARD FOR CATEGORIZING GAS MIXTURES CONTAINING FLAMMABLE AND NONFLAMMABLE COMPONENTS |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| NFPA 423:2016 | CONSTRUCTION AND PROTECTION OF AIRCRAFT ENGINE TEST FACILITIES |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| UL 147B:4ED 2016-08 | Standard for Nonrefillable (Disposable) Type Metal Container Assemblies for Butane |
| API 1621 : 2010 | BULK LIQUID STOCK CONTROL AT RETAIL OUTLETS |
| CGA V 6 : 2014 | STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| NFPA 1035 : 2015 | PROFESSIONAL QUALIFICATIONS FOR FIRE AND LIFE SAFETY EDUCATOR, PUBLIC INFORMATION OFFICER, YOUTH FIRESETTER INTERVENTION SPECIALIST, AND YOUTH FIRESETTER PROGRAM MANAGER |
| NFPA 1144 : 2018 | REDUCING STRUCTURE IGNITION HAZARDS FROM WILDLAND FIRE |
| NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
| NFPA 253 : 2015 | STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE |
| NFPA 418 : 2016 | HELIPORTS |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| NFPA 105 : 2016 | SMOKE DOOR ASSEMBLIES AND OTHER OPENING PROTECTIVES |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| CGA C 10 : 2013 | GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE |
| NFPA 92 : 2015 | SMOKE CONTROL SYSTEMS |
| UL 87:12ED 2016-03-24 | Standard for Power-Operated Dispensing Devices for Petroleum Products |
| ANSI A119.5 : 2009 | PARK MODEL RECREATIONAL VEHICLE STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.