ASTM D 93 : 2016-07
NA
NA
Status of Standard is Unknown
TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
Published date
01-07-2016
Sorry this product is not available in your region.
CONTAINED IN VOL. 05.01, 2016 Defines the determination of the flash point of petroleum products in the temperature range from 40 degrees C to 370 degrees C by a manual Pensky-Martens closed-cup apparatus or an automated Pensky-Martens closed-cup apparatus, and the determination of the flash point of biodiesel in the temperature range of 60 degrees C to 190 degrees C by an automated Pensky-Martens closed cup apparatus.
| Committee |
D 02
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| ASTM D 3205 : 1986 : R1991 | Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000) |
| API RP 754 : 2016 | PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| DIN EN 16900 E : 2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 91-86/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY, NO. 17 (FORMULA NO. 5-0) (METRIC) (S/S BY DOD-E-24635 OR FED-STD-595) |
| SAE AMS2644F | Inspection Material, Penetrant |
| MIL-STD-1548 Revision H:2014 | Into - Plane Servicing of Fuels at Commercial Airports |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| 13/30279896 DC : 0 | BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
| DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL F 24951 : B | FUEL OIL RECLAIMED |
| DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) (NO S/S DOCUMENT) |
| MIL-T-36385 Revision C:1977 | TESTER, FLASH POINT, CLOSED TYPE, 115 VOLT, 60 HZ, AC (S/S BY A-A-54509) |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| MIL-PRF-81309 Revision G:2014 | Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film |
| ASTM F 1201 : 1988 : R2016 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| SAE AMS1640B | Corrosion Removing Compound For Aircraft Surfaces |
| DOD-F-87935 Base Document:1984 | Fluid, Magnetic Particle Inspection, Suspension Medium (Metric) (S/S by A-A-59230) |
| MIL-DTL-16884 Revision P:2017 | Fuel, Naval Distillate |
| MIL-PRF-32177 Revision A:2012 | Cleaning Compound, Nonskid |
| IEEE C57.154-2012 | IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AIR810D | Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, MIL-PRF-5606, MIL-PRF-83282, and MIL-PRF-87257 Used in Hydraulic Test Stands |
| ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 | Standard Guide for Selecting Cleaning Agents and Processes |
| API 1509 : 2002 | ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
| NFPA 497M : 1991 | CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| IEEE DRAFT 1493 : D8 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
| ASTM D 8085 : 2017 | Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service |
| ASTM D 3757 : 2016 : REDLINE | Standard Guide for Preparing Specifications for Solvent-based Floor Polishes |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6823 : 2008 | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
| ASTM D 8046 : 2016 | Standard Guide for Pumpability of Heat Transfer Fluids |
| ASTM D 8048 : 2017-05 | TEST METHOD FOR EVALUATION OF DIESEL ENGINE OILS IN T-13 DIESEL ENGINE |
| ASTM E 502 : 2007 : R2013 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| ASTM F 2701 : 2008 | Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash (Withdrawn 2017) |
| ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 6985 : 2004 | Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
| ASTM D 3105 : 2017 : REDLINE | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 4485 : 2017-03 | SPECIFICATION FOR PERFORMANCE OF ACTIVE API SERVICE CATEGORY ENGINE OILS |
| ASTM D 6114 : 1997 : R2002 | Standard Specification for Asphalt-Rubber Binder |
| ASTM D 8175 : 2018 | Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester |
| MIL-DTL-83133 Revision K:2018 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 34 : 2018 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 | 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
| DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
| DEFSTAN 68-251/3(2007) : 2007 | FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
| DEFSTAN 68-251/2(2001) : 2001 | FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
| DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
| DEFSTAN 91-70/1(1990) : 1990 | CUTTING FLUID, SOLUBLE, BIOSTABLE - JOINT SERVICE DESIGNATION ZX-9 |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| ASTM D 7468 : 2016 : REDLINE | TEST METHOD FOR CUMMINS ISM TEST |
| ASTM D 8125 : 2017 | Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) |
| ASTM D 3941 : 2015-02 | TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS |
| ASTM D 6217 : 2011 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| MIL-C-83231 Revision A:1981 | Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts (S/S by SAE-AMS-C-83231) |
| MIL-C-10382 Revision D:1983 | Corrosion Preventive, Petrolatum, Spraying Application: for Food Handling Machinery and Equipment |
| DEFSTAN 91-4/9(2013) : 2013 | FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76 |
| MIL-PRF-32490 Base Document:2014 | Additive, Lubricity Improver, Distillate Fuel |
| MIL-DTL-25524 Revision F:2015 | Turbine Fuel, Aviation, Thermally Stable (JPTS) |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| MIL-P-85658 Base Document:1986 | PAINT, WATER DISPLACING |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) (S/S BY FED-STD-595/15187) |
| SAE AMS1426D | Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol Base |
| MIL-I-24718 Base Document:1990 | Insulating Resins, Solventless, Vacuum-Pressure-Impregnating; General Specification for |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| MIL T 83133 : D | TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
| MIL H 6083 : E | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| DEFSTAN 91-21/3(1989) : 1989 | LUBRICATING OIL, COMPOUNDED NATO CODE: 0-254 JOINT SERVICE DESIGNATION: OC-160 |
| MIL PRF 38219 : C | TURBINE FUEL, LOW VOLATILITY, JP-7 |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| I.S. EN 16900:2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| ASTM D 6361 : 1998 | Standard Guide for Selecting Cleaning Agents and Processes |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| ASTM D 88 : 2007 : R2013 | Standard Test Method for Saybolt Viscosity |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
| MIL-C-87936 Revision A:1985 | Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable (S/S by MIL-C-87937) |
| DOD-P-24555 Base Document:1977 | Paint, Aluminum, Heat-Resisting (650 Degree C), Low-Emissivity (0.40 or Less) (Metric) |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| TT-P-1565 Revision B:1978 | PAINT, BOOT-TOPPING BLACK (NO S/S DOCUMENT) |
| MIL-S-53018 Base Document:1983 | SEALER, WELD-THROUGH FOR OVERLAPPING SURFACES (NO S/S DOCUMENT) |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| SAE AIR81D | Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids |
| TT-E-490 Revision E:1975 | Enamel, Silicone Alkyd Copolymer, Semigloss (for Exterior and Interior Use (S/S by MIL-PRF-24635) |
| MIL F 46162 : D | FUEL, DIESEL, REFEREE GRADE |
| VV-P-216 Revision C:1982 | PENETRATING OIL (FOR LOOSENING FROZEN METALLIC PARTS) (S/S BY A-A-50493) |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) (S/S BY DOD-P-24647) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| MIL-PRF-38299 Revision E:2011 | Fluid, Purging, for Preserving Fuel Tanks of Jet Aircraft |
| MIL-DTL-32353 Revision A:2012 | Hydraulic and Lubricating Oil, Synthetic Hydrocarbon Base |
| O-L-172 Revision A:1967 | LEATHER DRESSING, VESICANT GAS RESISTANT (NO S/S DOCUMENT) |
| ISO/TR 29662:2009 | Petroleum products and other liquids — Guidance for flash point testing |
| MIL-DTL-87107 Revision E:2012 | Propellant, High Density Synthetic Hydrocarbon Type, Grade JP-10 |
| MIL-DTL-38219 Revision D:1998 | Turbine Fuel, Low Volatility, JP-7 |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) (S/S BY DOD-P-24631) |
| A-A-54509 Base Document:1991 | Tester, Flash Point, Closed-Type (120 Volt, 50/60 Hz, Ac) (No S/S Document) |
| AASHTO M 133 : 2012 | SPECIFICATION FOR PRESERVATIVES AND PRESSURE TREATMENT PROCESSES FOR TIMBER |
| DEFSTAN 91-99/1(1994) : INTERIM | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, PETROLEUM - NATO CODE: 0-135 JOINT SERVICE DESIGNATION: OM-11 |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| ASTM D 6468 : 2008 : R2013 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| NFPA 49 : 1994 | HAZARDOUS CHEMICALS DATA |
| SAE AMS2641C | Vehicle, Magnetic Particle Inspection Petroleum Base |
| ASTM D 7544 : 2012 | Standard Specification for Pyrolysis Liquid Biofuel |
| CGSB 25.1-2 : 1995 | METHODS OF SAMPLING AND TESTING WAXES AND POLISHES - FLASH POINT |
| NACE SP 04 87 : 2007 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| ASTM D 6114 : 1997 : EDT 1 | Standard Specification for Asphalt-Rubber Binder |
| ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| ASTM D 5290 : 1991 | Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997) |
| ASTM D 268 : 2001 : R2007 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 4857 : 2012 : REDLINE | Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
| ASTM D 6361/D6361M : 1998 : R2015 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 6074 : 2015 : REDLINE | Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
| ASTM D 88 : 2007 | Standard Test Method for Saybolt Viscosity |
| ASTM D 6985 : 2004 : REV A | Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010) |
| DEFSTAN 68-252/3(2005) : 2005 | FUEL SYSTEM ICING INHIBITOR NATO CODE: S-1745 JOINT SERVICE DESIGNATION: AL-41 |
| ASTM F 718 : 2007 : R2011 : EDT 1 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM D 3278 : 1996 : R2011 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
| ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
| ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| ASHRAE 26 : 2010 | MECHANICAL REFRIGERATION AND AIR-CONDITIONING INSTALLATIONS ABOARD SHIP |
| I.S. EN ISO 8178-5:1998 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
| NFPA 1 : 2021 | FIRE CODE |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| NEMA RE 2:1999 | Electrical Insulating Varnish |
| ASTM D 3955 : 2013 : REDLINE | Standard Specification for Electrical Insulating Varnishes |
| NFPA 321 : 1991 | BASIC CLASSIFICATION OF FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| DEFSTAN 91-86/4(2002) : 2002 | TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| 17/30352715 DC : 0 | BS IEC 60086-6 ED 1.0 - PRIMARY BATTERIES - PART 6: GUIDANCE ON ENVIRONMENTAL ASPECTS |
| SAE J183_201708 | Engine Oil Performance and Engine Service Classification (Other than \"Energy Conserving\") |
| MIL-C-83873 Revision A:1993 | Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (Age) (S/S by MIL-C-87937) |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
| ASTM F 1200 : 1988 : R2004 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| VV-F-800 Revision E:1987 | FUEL OIL, DIESEL (S/S BY A-A-52557) |
| A-A-59693 Revision A:2004 | Diesel Fuel, Biodiesel Blend (B20) (S/S by ASTM-D7467) |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| ASTM F 1201 : 1988 : R2004 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM F 1201 : 1988 : R1998 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| ASTM D 1859 : 1971 : R2000 | Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006) |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| PD ISO/TR 11018:2001 | Essential oils. General guidance on the determination of flashpoint |
| MIL-PRF-24951 Revision B:1995 | FUEL OIL RECLAIMED |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| AASHTO TP 102 : 2012 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| SAE J1510_201705 | Lubricants for Two-Stroke-Cycle Gasoline Engines |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL F 16884 : J | FUEL, NAVAL DISTILLATE |
| API PUBL 1629 : 1993 | GUIDE FOR ASSESSING AND REMEDIATING PETROLEUM HYDROCARBONS IN SOILS |
| NFPA 123 : 1999 | FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES |
| ASTM D 6448 : 2016 : REDLINE | Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
| SAE AMS3160J | Solvent, Petroleum |
| NFPA 386 : 1990 | PORTABLE SHIPPING TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| DEFSTAN 91-86/2(1997) : 1997 | TURBINE FUEL, AVIATION: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-44 - JOINT SERVICE DESIGNATION: AVCAT/FSII |
| QPL 68-251 : ISSUE 1 | QPL OF MATERIALS TO DEFENCE STANDARD 68-251 FUEL SOLUBLE PIPELINE CORROSION INHIBITORS/LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ASTM D 7666 : 2012 | Standard Specification for Triglyceride Burner Fuel |
| ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM F 718 : 2007 : R2017 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 2939 : 2003 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
| ASTM D 2604 : 1986 : R2000 | Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions (Withdrawn 2006) |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| ISO 8178-5:2015 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| EN ISO 8178-5 : 1997 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
| ASTM C 461 : 2017 : REDLINE | Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
| ASTM D 7665 : 2017 : REDLINE | Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
| MIL-PRF-62218 Revision B:1996 | Corrosion Preventive Compounds, Cold Application (for New and Fielded Motor Vehicles and Trailers) (S/S by A-A-59295) |
| MIL-PRF-24596 Revision B:2009 | Coating Compounds, Nonflaming, Fire-Resistant |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| ASTM D 6217 : 2011 : R2016 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| ASTM D 803 : 2015 : REDLINE | Standard Test Methods for Testing Tall Oil |
| MIL-PRF-12048 Revision E:1998 | Petroleum Testing Kit, Ground Fuels (No S/S Document) |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| TT-S-711 Revision C:1978 | STAIN, OIL TYPE, WOOD, INTERIOR (NO S/S DOCUMENT) |
| MIL-C-52947 Revision B:1986 | Coagulant, Water Treatment: Polyelectrolyte, Cationic, Liquid |
| API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
| ASTM D 7215 : 2016 : REDLINE | Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels |
| MMM-A-002048 Base Document:1978 | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION (S/S BY MIL-A-3316) |
| DEFSTAN 91-17/2(1990) : 1990 | GREASE, CALCIUM BASE JOINT SERVICE DESIGNATION LG-280 |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| MIL-PRF-11090 Revision K:2016 | Cleaning Compound, Degreasing and Depreserving Solvent |
| SAE J671_201406 | Vibration Damping Materials and Underbody Coatings |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| MIL-PRF-29602 Revision A:2005 | Cleaning Compounds, Parts Washer and Spray Cabinet |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| ASTM D 2069 : 1991 : R1998 | Standard Specification for Marine Fuels (Withdrawn 2003) |
| MIL-P-82522 Revision C:1990 | Propellant, Jet Engine, T-H Dimer, Grade RJ-4 (No S/S Document) |
| DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| TT-W-568 Revision E:1975 | Wood Preservative; Creosote-Petroleum Solution (No S/S Document) |
| ASTM F 718 : 2007 | Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| MIL P 87107 : C | PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
| MIL T 25524 : D | TURBINE FUEL, AVIATION, THERMALLY STABLE |
| MIL-D-50030 Revision H:1986 | Decontaminating Agent, DS2 (S/S by MIL-DTL-12468) |
| ASTM F 1200 : 1988 : R2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| MIL-DTL-25576 Revision E:2006 | Propellant, Rocket Grade Kerosene |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
| SAE AMS1374A | Remover, Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type |
| SAE AMS1536B | Cleaner for Aircraft Components Cold Tank Type, Solvent-Base |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| NFPA 81 : 1986 | FUR STORAGE, FUMIGATION AND CLEANING |
| ASTM D 3278 : 1996 : R2004 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| SAE AMS1539 | CLEANING COMPOUND, TERPENE Circuit Board Cleaner |
| DEFSTAN 91-43/2(1993) : 1993 | LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
| I.S. CEN/TR 15138:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
| ASTM C 916 : 2014 : REDLINE | Standard Specification for Adhesives for Duct Thermal Insulation |
| ASTM D 6618 : 2016 : REDLINE | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
| BS ISO 8178-5:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| BS 2000-35(1993) : 1993 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD |
| ASTM D 7156 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
| ASTM D 8147 : 2017 | Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines |
| ASTM E 502 : 2007 : EDT 1 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 1655 : 2018-01 | SPECIFICATION FOR AVIATION TURBINE FUELS |
| ASTM F 1201 : 1988 : R2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ISO/TR 11018:1997 | Essential oils — General guidance on the determination of flashpoint |
| ASTM D 6468 : 2008 | Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| BS EN ISO 8178-5:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| DEFSTAN 91-38/1(1978) : 1978 | PETROLATUM, TECHNICAL JOINT SERVICE DESIGNATION: PX-6 PETROLATUM, TECHNICAL NATO CODE NO: S-743 JOINT SERVICE DESIGNATION: PX-7 |
| AASHTO TP 102 : 2012 : R2015 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
| TT-C-001951 Base Document:1976 | COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE (NO S/S DOCUMENT) |
| API 555 : 2013 | PROCESS ANALYZERS |
| 08/30190684 DC : DRAFT OCT 2008 | BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO. 20) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| ASTM F 1200 : 1988 : R1998 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-PRF-16173 Revision E:1993 | Corrosion Preventive Compound, Solvent Cutback, Cold-Application |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| MIL-D-16791 Revision G:1990 | Detergents, General Purpose (Liquid, Nonionic) |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| ASTM F 2417 : 2017 : REDLINE | Standard Specification for Fire Safety for Candles |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) (S/S BY DOD-E-24635, FED-STD-595) |
| ASTM D 5372 : 2017 : REDLINE | Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| 15/30325842 DC : 0 | BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| MIL-I-24092 Revision D:1993 | Insulating Varnishes and Solventless Resins for Application by the Dip Process |
| SAE AMS1424N | Fluid, Aircraft Deicing/Anti-Icing, SAE Type 1 |
| MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
| MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER, AND RELATED MATERIALS: PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT) |
| CGSB 2.16 : 1994 | WATERLESS HAND CLEANER |
| DEFSTAN 91-86/3(2002) : 2002 | TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| DOD-PRF-24648 Base Document:1985 | Primer Coating, Zinc Dust Pigmented for Exterior Steel Surfaces (Metric) (S/S by A-A-59745) |
| MIL-DTL-46162 Revision E:2002 | Fuel, Diesel, Referee Grade (No S/S Document) |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| DEFSTAN 91-86/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| MIL-P-24380 Revision B:1989 | Paint, Anchor Chain, Solvent Type, Gloss Black (Metric)(S/S by MIL-PRF-24635) |
| MIL-I-25135 Revision E:1984 | Inspection Materials, Penetrants (S/S by SAE-AMS2644) |
| MIL-DTL-87173 Revision C:2014 | PROPELLANT, PRIMING FLUID ALCM, GRADE PF-1 |
| ASTM ES 19 : 1991 | Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Withdrawn 1994) |
| DEFSTAN 91-44/1(1978) : 1978 | LUBRICATING OIL, GENERAL PURPOSE: PETROLEUM, LIGHT NATO CODE NO. 0-134 JOINT SERVICE DESIGNATION: OM-13 |
| SAE AMS1435C | Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways |
| API 13I SPANISH : 1995 | PRACTICA RECOMENDADA PROCEDIMIENTO ESTANDAR PARA LAS PRUEBAS DE LABORATORIO CON FLUIDOS DE PEFORACION |
| IEEE 1493 : 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
| DEFSTAN 91-86/1(1994) : INTERIM | TURBINE FUEL, AVIATION, HIGH FLASH TYPE CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| NFPA 30 FRENCH : 1996 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ASTM D 6823 : 2008 : R2013 | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
| SAE J357_201601 | Physical and Chemical Properties of Engine Oils |
| SAE J313_201706 | Diesel Fuels |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| DEFSTAN 68-131/2(2006) : 2006 | MINERAL JELLY |
| ASTM D 268 : 2001 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM F 1200 : 1988 : R2016 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| ASTM D 7583 : 2016 : REDLINE | Standard Test Method for John Deere Coolant Cavitation Test |
| ASTM D 6483 : 2004 | Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) |
| ASTM D 8074 : 2016 | Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine |
| ASTM D 7544 : 2012 : R2017 | Standard Specification for Pyrolysis Liquid Biofuel |
| ASTM D 5177 : 1991 : R1996 | Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
| ASTM D 5452 : 2012 : REDLINE | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM D 6681 : 2017 : REDLINE | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
| ASTM D 3278 : 1996 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 7960 : 2018 : REDLINE | Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components |
| ASTM D 1131 : 1997 | Standard Test Methods of Testing Rosin Oils (Withdrawn 2003) |
| NFPA 1 : 2018 | FIRE CODE |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
| NACE RP 04 87 : 0 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTATIVES AND VAPOUR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| ASTM D 3941 : 2015-02 | TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.