![header thumbnail](/images/publishers\bsi_cover.gif)
BS 7671(2008) : 2018
Current
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
Available format(s)
Hardcopy
Published date
30-06-2019
Publisher
Provides to the design, erection and verification of electrical installations.
Committee |
JPEL/64
|
DevelopmentNote |
NEW CHILD AMD 1 2020 IS ADDED
|
DocumentType |
Standard
|
ISBN |
978 1 785 61170 4
|
Pages |
576
|
ProductNote |
NEW CHILD AMD 1 2020 IS ADDED
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
HD 60364-5-53:2015/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
BS EN 62305-1:2011 | Protection against lightning General principles |
HD 60364-7-702:2010 | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
BS 546:1950 | Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors |
BS EN 50085-2-1 : 2006 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS |
BS EN 60898-1 : 2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION |
IEC 60038:2009 | IEC standard voltages |
BS IEC 61000-5.2 : 1997 | |
BS EN 62353:2014 | Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment |
BS EN 61534-21:2014 | Powertrack systems Particular requirements for powertrack systems intended for wall and ceiling mounting |
BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
BS EN 62196-2:2017 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
BS EN 61241-17:2005 | Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
BS EN 61184 : 2008 | BAYONET LAMPHOLDERS (IEC 61184:2017) |
BS EN 61558-2-5:2010 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
BS EN 60598-2-23:1997 | Luminaires. Particular requirements Extra low voltage lighting systems for filament lamps |
BS EN 50086-1:1994 | Specification for conduit systems for cable management General requirements |
BS EN ISO 11446:2004 | Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage |
BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
BS 88-3(2010) : 2010 COR 2014 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
BS EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for bells and chimes |
HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
BS EN 61034-2 : 2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS PART 2: TEST PROCEDURE AND REQUIREMENTS |
BS EN 61386-1:2008 | Conduit systems for cable management General requirements |
BS EN 50428 : 2005 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
BS EN 61643-21 : 2001 | LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS |
BS EN 60445:2010 | Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors |
BS EN 60598-2-13 : 2006 | LUMINAIRES - PART 2-13: PARTICULAR REQUIREMENTS - GROUND RECESSED LUMINAIRES (IEC 60598-2-13:2006) |
BS EN 60335-2-53:2011 | Household and similar electrical appliances. Safety Particular requirements for sauna heating appliances and infrared cabins |
BS EN 50525-3-21:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
BS EN 50085-2-3:2010 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements for slotted cable trunking systems intended for installation in cabinets |
BS EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems Principles, requirements and tests |
BS EN 61558-2-4:2009 | Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
HD 60364-7-709:2009/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS |
BS 5266-1:2011 | Emergency lighting Code of practice for the emergency escape lighting of premises |
BS EN 61386-22 : 2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 22: PARTICULAR REQUIREMENTS - PLIABLE CONDUIT SYSTEMS |
BS EN 60447:2004 | Basic and safety principles for man-machine interface, marking and identification. Actuating principles |
BS EN 50565-1:2014 | Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U<sub>0</sub>/U) General guidance |
BS EN 60446:2007 | Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics |
BS EN 61386-24:2010 | Conduit systems for cable management Particular requirements. Conduit systems buried underground |
HD 60364-7-721:2009/corrigendum:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS |
BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
BS EN 60038:2011 | CENELEC standard voltages |
IEC 60331-2:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm |
BS EN 60309-1 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
HD 60364-7-705:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
BS EN 61557-2:2007 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation resistance |
BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
BS EN 60669-2-3:2006 | Switches for household and similar fixed electrical installations Particular requirements. Time delay switches (TDS) |
BS EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
HD 60364-4-42 : 2011 AMD 1 2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
BS EN 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
BS EN 60947-7-2:2009 | Low-voltage switchgear and controlgear Ancillary equipment. Protective conductor terminal blocks for copper conductors |
BS 1363-2(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
BS EN 60721-3-4:1995 | Classification of environmental conditions. Classification of groups of environmental parameters and their severities Stationary use at non-weatherprotected locations |
BS 5839-1:2013 | Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises |
IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
BS EN 50085-1 : 2005 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
BS EN 60898-2:2006 | Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c and d.c. operation |
BS EN 61140 : 2002 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
BS EN 60332-1-2 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004) |
BS 196:1961 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
BS EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust Selection and installation |
BS EN 60598-2-24:2013 | Luminaires Particular requirements. Luminaires with limited surface temperatures |
BS EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
BS 5803-5:1985 | Thermal insulation for use in pitched roof spaces in dwellings Specification for installation of man-made mineral fibre and cellulose fibre insulation |
BS IEC 60287-1-1 : 2006 | ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL |
BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
BS EN 60255-22-1:2008 | Measuring relays and protection equipment Electrical disturbance tests. 1 MHz burst immunity tests |
BS 8491:2008 | Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems |
HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
BS EN 50085-2-4:2009 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements for service poles and service posts |
HD 60364-5-54:2011/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
BS EN 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
BS EN 50281-2-1:1999 | Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures |
BS EN 61537:2007 | Cable management. Cable tray systems and cable ladder systems |
BS EN 61386-21 : 2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 21: PARTICULAR REQUIREMENTS - RIGID CONDUIT SYSTEMS |
BS EN 60228:2005 | Conductors of insulated cables |
BS EN 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval |
BS EN 50525-2-11:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U) Cables for general applications. Flexible cables with thermoplastic PVC insulation |
BS EN 62305-2:2012 | Protection against lightning Risk management |
BS EN 1648-2:2012 | Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations Motor caravans |
BS EN 61439-4:2013 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) |
BS EN 60702-2 : 2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS |
BS EN 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
BS 4573(1970) : 1970 | SPECIFICATION FOR 2-PIN REVERSIBLE PLUGS AND SHAVER SOCKET-OUTLETS |
BS 6220:1983 | Specification for junction boxes for use in electrical installations with rated voltages not exceeding 250 V |
HD 384.7.711 : 200S1 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS |
BS EN 60079-10-1:2015 | Explosive atmospheres Classification of areas. Explosive gas atmospheres |
BS EN 62305-3:2011 | Protection against lightning Physical damage to structures and life hazard |
BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
BS 8573:2012 | Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire |
BS EN 12954:2001 | Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines |
BS 7769-1.2:1994 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses Sheath eddy current loss factors for two circuits in flat formation |
BS EN 50086-2-1:1996 | Specification for conduit systems for cable management. Particular requirements Rigid conduit systems |
HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
BS EN 50086-2-3:1996 | Specification for conduit systems for cable management. Particular requirements Flexible conduit systems |
BS EN 60598-1:2015 | Luminaires General requirements and tests |
BS EN 50522:2010 | Earthing of power installations exceeding 1 kV a.c. |
HD 60364-7-714:2012 | Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations |
BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
HD 60364-5-51:2009/A12:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
BS EN 1648-1:2012 | Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations Caravans |
BS EN 61439-6:2012 | Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways) |
BS EN 50525-2-21:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flexible cables with crosslinked elastomeric insulation |
BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
BS EN 60079-10-2:2015 | Explosive atmospheres Classification of areas. Explosive dust atmospheres |
BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
BS EN 60947-7-1:2009 | Low-voltage switchgear and controlgear Ancillary equipment. Terminal blocks for copper conductors |
BS EN 60309-2 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES |
HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
BS 559:2009 | Specification for the design and construction of signs for publicity, decorative and general purposes |
IEC TS 62081:1999 | Arc welding equipment - Installation and use |
BS EN 60904-3:2008 | Photovoltaic devices Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data |
HD 60364-7-701:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER |
BS 7769-3.1:1997 | Electric cables. Calculation of the current rating. Sections on operating conditions Reference operating conditions and selection of cable type |
BS EN 50086-2-4:1994 | Specification for conduit systems for cable management. Particular requirements Conduit systems buried underground |
HD 60364-5-559:2012/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS |
HD 60364-7-706:2007 | Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement |
HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
BS EN 60309-4 : 2007 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK (IEC 60309-4:2006, MODIFIED) |
BS EN 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications General and testing requirements |
BS EN 50525-3-41:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
BS 3036:1958 | Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) |
HD 60364-5-557:2013/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
BS EN 60079-17:2014 | Explosive atmospheres Electrical installations inspection and maintenance |
HD 60364-1:2008/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS |
BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
PD 6536:1992 | Extra-low voltage (ELV). Limit values |
HD 308 S2:2001 | Identification of cores in cables and flexible cords |
BS EN 60269-2:1995 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
BS EN 60146-2:2000 | Semiconductor convertors. General requirements and line commutated convertors Self-commutated semiconductor converters including direct d.c. converters |
BS 6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
BS 1363-1(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS |
BS 7769-1.1:1997 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General |
BS EN 60670-1 : 2005 | BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
BS EN 60947-6-1:2005 | Low-voltage switchgear and controlgear Multiple function equipment. Transfer switching equipment |
BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
BS EN 60669-2-4:2005 | Switches for household and similar fixed electrical installations Particular requirements - Isolating switches |
BS EN 60947-3 : 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS |
BS 8450:2006 | Code of practice for installation of electrical and electronic equipment in ships |
BS 1363-4(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
BS EN 14505:2005 | Cathodic protection of complex structures |
BS EN 60947-5-1 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
BS EN 50107-1:2002 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV General requirements |
BS EN 60947-6-2:2003 | Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
BS 8519:2010 | Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice |
HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
BS EN 61558-2-23:2001 | Safety of power transformers, power supply units and similar Particular requirements for transformers for construction sites |
BS EN 61557-9:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for insulation fault location in IT systems |
BS EN 61558-2-15:2012 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for isolating transformers for the supply of medical locations |
BS EN 62020:1999 | Electrical accessories. Residual current monitors for household and similar uses (RCMs) |
BS EN 50438:2013 | Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks |
BS EN 61048 : 2006 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
BS 3676:1963 | Specification for switches for domestic and similar purposes (for fixed or portable mounting) |
BS EN 61535 : 2009 | INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS |
HD 60364-7-710:2012/AC:2013 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-710: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MEDICAL LOCATIONS |
BS EN 50525-2-31:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation |
IEC 60974-9:2010 | Arc welding equipment - Part 9: Installation and use |
BS EN 50281-1-2:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance |
PD CLC/TR 50480:2011 | Determination of cross-sectional area of conductors and selection of protective devices |
BS EN 62423:2012 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
BS 646(1958) : 1958 | SPECIFICATION FOR CARTRIDGE FUSE-LINKS (RATED UP TO 5 AMPERES) FOR A.C. AND D.C. SERVICE |
BS EN 60570:2003 | Electrical supply track systems for luminaires |
BS 88-2.2:1988 | Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application) Additional requirements for fuses with fuse-links for bolted connections |
HD 60364-7-715:2012/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS |
HD 60364-5-551:2010/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
CLC/TS 61643-12 : 2009 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
BS 7919:2001 | Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
BS EN 60598-2-18 : 1994 | LUMINAIRES - PART 2-18: PARTICULAR REQUIREMENTS - LUMINAIRES FOR SWIMMING POOLS AND SIMILAR APPLICATIONS |
BS AU 149a:1980 | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) |
BS EN 60702-1 : 2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES |
IEC 60331-1:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm |
BS EN 50107-2:2005 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Requirements for earth-leakage and open-circuit protective devices |
BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
IEC 60800:2009 | Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation |
BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
BS EN ISO 13174:2012 | Cathodic protection of harbour installations |
BS EN 50525-3-11:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
HD 60364-7-729:2009/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-729: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - OPERATING OR MAINTENANCE GANGWAYS |
BS EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screw-type clamping units |
BS EN 60335-2-96 : 2002 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING |
BS EN 1838:2013 | Lighting applications. Emergency lighting |
BS 3535:1962 | Specification for safety isolating transformers for industrial and domestic purposes |
BS EN 50525-2-51:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation |
BS EN 60335-2-41 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
BS 7909:2011 | Code of practice for temporary electrical systems for entertainment and related purposes |
BS EN 62040-1 : 2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
BS EN 60669-2-1 : 2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
BS EN 50525-2-82:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Cables with crosslinked elastomeric insulation for decorative chains |
BS EN 60721-3-3:1995 | Classification of environmental conditions. Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations |
BS EN 61557-8:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems |
BS EN 62305-4:2011 | Protection against lightning Electrical and electronic systems within structures |
BS 8488(2009) : 2009 | PREFABRICATED WIRING SYSTEMS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS - SPECIFICATION |
BS EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
BS EN 61995-1:2008 | Devices for the connection of luminaires for household and similar purposes General requirements |
BS EN 50174-1 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
BS EN 50525-2-12:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Cables with thermoplastic PVC insulation for extensible leads |
BS EN 13636:2004 | Cathodic protection of buried metallic tanks and related piping |
BS HD 60269-3 : 2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
HD 60364-7-703:2005 | Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters |
BS 7889:2012 | Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations |
BS EN 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells |
BS EN 60998-2-2:2004 | Connecting devices for low voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screwless-type clamping units |
BS EN 60335-2-76 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
HD 60364-7-717:2010/AC:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
BS EN 60669-1 : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
HD 60364-7-740:2006/A11:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES |
BS 88-6:1988 | Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commercial electrical installations |
BS 7698-12:1998 | Reciprocating internal combustion engine driven alternating current generating sets Emergency power supply to safety devices |
BS EN 50086-2-2:1996 | Specification for conduit systems for cable management. Particular requirements Pliable conduit systems - pliable conduit systems |
BS EN 60068-2-11:1999 | Environmental testing. Test methods Tests. Test KA. Salt mist |
BS EN 61008-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
BS EN 61347-2-2:2012 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
BS EN 61557-6:1998 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring ormonitoring of protective measures Residual current devices (RCD) in TT, TN and IT systems |
BS EN 60238 : 2004 | EDISON SCREW LAMPHOLDERS |
BS EN 60269-3:1995 | BS Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
BS AU 177a:1980 | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary) |
BS 7769-2.2:1997 | Electric cables. Calculation of the current rating. Thermal resistance A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
BS EN 61009-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
BS EN 60335-2-29 : 2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS |
CLC/TS 61643-22:2016 | Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles |
IEC 60331-3:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure |
BS EN 61386-23 : 2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 23: PARTICULAR REQUIREMENTS - FLEXIBLE CONDUIT SYSTEMS |
BS 6217:1981 | Guide to graphical symbols for use on electrical equipment |
HD 60364-7-708:2017 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
BS 4177:1992 | Specification for cooker control units |
BS 1362:1973 | Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs) |
IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
BS EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators |
BS EN 60092-507:2015 | Electrical installations in ships Small vessels |
BS HD 60269-2:2013 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K |
BS EN ISO 12696:2016 | Cathodic protection of steel in concrete |
BS EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
€111.02
Excluding VAT
EUR
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.